What Air Setting to Use for Foggy Windows in Winter?

1 Answers
DeHope
07/24/25 9:45pm
In winter, use warm air for foggy windows. Steps to turn on the heater: 1. Start the car; 2. Turn off the AC; 3. Wait until the water temperature rises above 40 degrees Celsius; 4. Turn the knob to the red zone to activate the warm air mode. The reason for foggy windows is: In winter, with the windows closed, moisture inside the car cannot evaporate, and the temperature difference between the inside and outside of the car is significant. When moisture meets the cold glass, it forms a layer of fog. Solutions for foggy windows in winter: 1. Apply anti-fog spray, which forms a transparent protective film on the glass; 2. Use the air conditioning's dehumidification function to reduce air humidity; 3. Use the warm air method from the air conditioning to minimize the temperature difference and eliminate frost on the windows.
Was this review help?
15
1
Share
More Forum Discussions

What to Do with Two Beidou Cards in a Truck?

When two people drive the same truck, to avoid fatigue driving, if they forget to turn off the engine and switch cards during the driver change, it will not only cause the Beidou driver card to continue timing and be considered as fatigue driving, but also lead to a mismatch between the Beidou driver card information and the actual driver. This may result in corresponding penalties from traffic police, which is not worth the loss. Motor vehicle drivers committing any of the following violations will be penalized with 1 demerit point: 1. Driving a motor vehicle without using lights as required; 2. Driving a motor vehicle without proper meeting of vehicles as required; 3. Driving a motor vehicle with cargo exceeding the prescribed length, width, or height; 4. Driving a motor vehicle on the road without displaying the inspection qualification mark or insurance mark, or without carrying the vehicle license or motor vehicle driving license.
15
1
Share

What Happens If a New Battery Is Not Fully Charged for the First Time?

Not fully charging a new battery for the first time will not have any significant impact. Below is an introduction to the voltage and current during battery charging: 1. Voltage: The charging voltage for motorcycles is 12V. During the charging process, the voltage typically ranges between 13.5-14.5V. When charged on the vehicle via the rectifier, it will not exceed 15V. If using a charger, the charging voltage is usually around 14V. 2. Current: The charging current for motorcycles should not be too high. It is recommended that vehicle owners avoid using fast charging. During charging, use a current that is half the rated charging current and extend the rated charging time by double.
14
1
Share

How to Steer on Curves?

Methods for steering on curves: Turn the steering wheel to the left for left curves and to the right for right curves. Precautions for steering on curves: 1. Avoid excessive steering wheel rotation; 2. Reduce throttle in advance, apply brakes, slow down the speed, and observe both side mirrors. The functions of a car steering wheel include: audio control, hands-free calling, cruise control, and instrument data switching. The working principle of the steering wheel is: converting force into torque and transmitting it to the steering shaft. The correct way to hold the steering wheel is: imagine the steering wheel as a clock face, with the left hand at the nine o'clock position and the right hand at the three o'clock position, thumbs naturally pointing upwards and the other four fingers pointing downwards.
14
4
Share

What does xdrive mean on the back of a BMW?

BMW with xdrive on the back indicates that the vehicle is equipped with a four-wheel drive system. xdrive is an intelligent all-wheel drive system developed by BMW. Taking the BMW X6 2021 xDrive40i Premium M Sport Package Edition as an example, its body dimensions are: length 4947mm, width 2004mm, height 1698mm, with a wheelbase of 2975mm. The BMW X6 2021 xDrive40i Premium M Sport Package Edition is powered by a 3.0T 340 horsepower L6 turbocharged engine, with a maximum power of 250 kilowatts and a maximum torque of 450 Newton meters, paired with an 8-speed automatic transmission.
15
1
Share

What to Do When BMW Tire Pressure Warning Light Comes On

BMW tire pressure warning light comes on the processing method is: 1. If it is a simple air leak, just inflate the tire; 2. If there is damage, timely repair or replacement is needed; 3. Check the dashboard fault and repair it in time. The hazards of BMW tire pressure loss are: 1. Increased tire body deformation, which can easily cause cracks on the tire side; 2. Excessive heat promotes rubber aging, fatigue of the cord layer, and cord breakage; 3. Increased contact area accelerates wear on the tire shoulder. Taking the BMW x740i as an example, it is a 5-door, 7-seat large SUV with body dimensions of: length 5163mm, width 2000mm, height 1835mm, and a wheelbase of 3105mm.
5
2
Share

Is Cracking Paint on a New Car a Quality Issue?

If the cracking paint on a new car is not caused by human factors, then it is indeed a quality issue. Here is an introduction to related paint content: 1. Spray paint: White spray paint is inherently used to repair scratches on cars, but it certainly differs from the effect of baked paint. 2. Adhesion: The adhesion of spray paint is much worse than that of baked paint, and it may start to peel off after about a year. The difference in the paint surface not only has a certain color difference from the original factory paint but also lacks the gloss of baked paint. Therefore, if you have requirements for the paint surface, try not to choose spray paint.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.