Was the 2017 CS75 Discontinued?

1 Answers
DelAlaina
07/29/25 12:59pm
2017 CS75 has no exact news of discontinuation. The Changan CS75 is a compact SUV positioned between the CS55 and CS95. Here is some extended information about the CS75: 1. The Changan CS75 can be considered a veteran in the domestic brand SUV market. After a recent generational update, it has once again regained its vitality. In terms of appearance, the current CS75 adopts a new family-style design, abandoning the previous rugged front face for a much more refined look. 2. The side profile is quite angular, with straight waistlines giving it a very robust appearance. In terms of dimensions, it measures 4650/1850/1695mm in length/width/height with a wheelbase of 2700mm, standard for a compact SUV, yet it doesn’t look small at all. The rear design is relatively simple and stable, featuring a quasi-full-width taillight design that adds a touch of modernity. 3. The interior boasts a strong technological feel with generous use of materials. The dashboard and door armrests are wrapped in leather, complemented by wood-grain decorative panels, enhancing the overall sense of luxury. 4. Under the hood, the Changan CS75 is equipped with a new Blue Core 1.5TGDI direct-injection turbocharged engine, paired with an Aisin third-generation 6AT automatic transmission, delivering a maximum power of 131KW (178PS) and a peak torque of 265N·m. The acceleration and gear shift smoothness are quite commendable.
Was this review help?
10
4
Share
More Forum Discussions

Is the Outside Temperature Displayed in a Car Accurate?

Car Outside Temperature Displayed on the Dashboard is Not Accurate. The temperature released by meteorological departments is measured based on the air circulating in a louvered box without direct sunlight, using a thermometer as the measuring tool. In contrast, the outside temperature displayed on a vehicle's dashboard is measured via a temperature sensor. The outside temperature sensor is typically installed behind the engine intake grille, in front of the radiator. It measures the temperature of the airflow passing through this area. There are three main reasons why the dashboard temperature is inaccurate: 1. Different Airflow Velocities: Since the temperature sensor is installed behind the intake grille (i.e., the front grille), the temperature readings differ when the car is stationary versus when it is moving due to variations in airflow velocity. 2. Influence of Engine Heat Source: As the outside temperature sensor is located at the front of the car, it is affected by the engine's heat source. The air temperature near the engine and radiator is inevitably higher than the ambient atmospheric temperature. 3. NTC Thermistor: The principle of the outside temperature sensor generally relies on an NTC thermistor to measure temperature. NTC stands for Negative Temperature Coefficient, meaning the resistance decreases as the temperature increases.
19
2
Share

What Temperature Should the Air Conditioning Be Set to in Winter?

In winter, the air conditioning should be set between 20 to 26 degrees Celsius. This is because people wear more clothing during winter, and if the indoor temperature exceeds 20 degrees, it may feel slightly hot. Setting the air conditioning above 26 degrees can make the heating too intense, leading to excessively dry indoor air, which can dehydrate bodily fluids and cause discomfort such as dryness in the eyes, ears, mouth, nose, throat, and skin. Car air conditioning refers to the air conditioning system installed in vehicles, which can cool, heat, ventilate, and purify the air inside the cabin, providing a comfortable environment for passengers, reducing driver fatigue, and enhancing driving safety.
18
5
Share

What transmission does the BJ20 use?

The BJ20 is equipped with a 6-speed manual transmission and a CVT transmission. The vehicle is powered by a 1.5T turbocharged engine, delivering a maximum power of 110 kW and a peak torque of 210 Nm. In terms of exterior design, the BJ20 features retro-style circular headlights, a family-style five-slot grille, and 18-inch dual-tone alloy wheels with red sport brake calipers. Inside, the BJ20 comes with spacious seats featuring 6-way electric adjustment, ventilation, and heating functions. The dimensions of the BJ20 are 4451mm in length, 1845mm in width, and 1700mm in height, with a wheelbase of 2670mm. For safety, the BJ20 includes a hill start assist system.
19
4
Share

What are the steps to replace a car battery?

The steps to replace a car battery are as follows: 1. Ensure the car is turned off and all electrical devices are switched off; 2. First disconnect the negative terminal of the battery, then the positive terminal, remove the battery securing components, and take out the old battery; 3. Clean the connection points between the battery terminals and the battery cables, install the new battery, secure the battery with the fixing components, tighten the positive terminal connection, and then the negative terminal connection. A car battery, also known as a storage battery, is a type of battery that works by converting chemical energy into electrical energy. The commonly referred to car battery is a lead-acid battery, which is mainly made of lead and its oxides, with sulfuric acid solution as the electrolyte.
9
2
Share

How Often Should a Car's Three-Way Catalytic Converter Be Replaced?

The service life of a three-way catalytic converter is approximately 80,000 to 100,000 kilometers for domestic standards in China, while it is generally 160,000 to 200,000 kilometers abroad. Maintenance of the three-way catalytic converter should typically be performed at a 4S shop or a reputable repair facility, and the maintenance interval should not be too long. Paying extra attention during daily vehicle use can help maintain your car's performance and reduce harmful emissions. Below are five key points to consider when using a three-way catalytic converter: 1. Vehicles equipped with a three-way catalytic converter must not use leaded gasoline. Lead particles expelled with the exhaust gases can coat the catalyst surface, reducing its effective area and significantly diminishing the converter's efficiency, leading to lead poisoning of the catalytic converter. 2. Prevent unburned fuel mixture from entering the catalytic converter. The three-way catalytic converter begins to function at around 200 degrees Celsius. However, when temperatures exceed 1,000 degrees Celsius, the precious metal components of the catalyst can undergo chemical changes, reducing the effective catalyst content and weakening its catalytic effect. Therefore, during vehicle operation, avoid the following conditions: prolonged idling, delayed ignition timing, misfiring in individual cylinders, difficulty starting, overly rich fuel mixture, engine oil burning, oxygen sensor failure, and overheating due to poor cooling. 3. The converter is prone to breakage after a collision, so extra caution is needed when driving on uneven roads, as most three-way catalytic converters contain a honeycomb ceramic catalyst carrier. 4. If abnormal operating conditions occur, promptly stop and inspect the vehicle, as these conditions can cause permanent damage to the catalytic converter. 5. Never turn off the ignition switch while the vehicle is in motion.
1
0
Share

Where is the steering wheel angle sensor located?

Steering wheel angle sensor is located inside the steering column below the steering wheel. The steering wheel angle sensor is a component of the vehicle stability control system, generally connected to the PCM via CAN bus. It can be divided into analog steering wheel angle sensors and digital steering wheel angle sensors. The commonly used steering wheel angle sensor adopts a mechanical structure with three gears to measure the rotation angle and the number of turns. The large gear rotates with the steering column, while two small gears (differing by one tooth) are fixed to the vehicle body along with the sensor housing and do not rotate with the steering wheel. The two small gears respectively collect the rotation angle of the steering wheel. Due to the one-tooth difference, different numbers of turns will result in specific angle differences, through which the absolute steering angle of the steering wheel can be calculated.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.