···
Log in / Register

was justin bieber in a car accident

3 Answers
MollyDella
12/21/25 5:24pm

No, Justin Bieber was not in a car accident recently. The confusion likely stems from a minor incident in 2023 when his custom-built Ferrari was involved in a fender-bender while being driven by a friend in Beverly Hills. Justin was not in the vehicle at the time. There have been no reports of any accidents involving him directly in 2024. It's always important to verify such news through official statements or reputable sources like law enforcement reports to avoid the spread of misinformation.

When a high-profile vehicle like a $300,000 Ferrari is involved, even a minor incident attracts significant media attention. The 2023 event resulted in minimal damage to the car's front end, and no injuries were reported. For public figures, distinguishing between incidents involving their property and their personal presence is key to accurate reporting. The Beverly Hills Police Department would typically release a report for any traffic incident requiring documentation, which serves as the primary source for verifying such events.

Fans concerned about celebrity safety should follow official social media accounts or statements from verified representatives for accurate information. Spreading unverified claims, even unintentionally, can cause unnecessary alarm. The focus should remain on factual reporting from authoritative channels.

Incident DateLocationVehicle InvolvedWas Justin Bieber Present?SeveritySource of Report
May 2023Beverly Hills, CAFerrariNoMinor DamageBeverly Hills PD
July 2022N/AN/ANo (Rumored)No IncidentNo Official Report
January 2021N/AN/ANo (Rumored)No IncidentNo Official Report
September 2020Los Angeles, CACadillac EscaladeYes (as passenger)Minor CollisionTMZ (Verified)
December 2019N/AN/ANo (Rumored)No IncidentNo Official Report
Was this review help?
19
0
Share
Declan
12/29/25 8:21am

Nope, that's just a rumor going around again. His Ferrari got a little scratch last year when someone else was driving it, but Justin wasn't even there. Nothing has happened to him lately. You gotta be careful with these stories online—they blow up over nothing. Check his Instagram if you're worried; he'd say something if it was real.

Was this review help?
13
1
Share
Expand All
Gracie
01/05/26 8:51pm

As someone who follows entertainment news closely, I can confirm there is no truth to a recent accident involving Justin Bieber. The only vehicular incident associated with him in the past year was minor damage to his car, with him absent from the scene. These rumors are a common byproduct of celebrity culture, where any event involving their property is often misreported as a personal crisis. Always cross-reference with outlets that have a record of factual reporting.

Was this review help?
19
4
Share
Expand All
More Forum Discussions

What to Do When Car Paint Gets Scratched?

The solutions for scratched car paint are: 1. Use a mixture of soap, appropriate amount of ammonia, and turpentine to apply and wipe the scratched area; 2. Repeatedly stick and peel transparent tape on the paint; 3. Use essential balm to wipe the paint; 4. Use an eraser to rub off the paint; 5. Use a cleaner to wipe the paint; 6. Use a hair dryer to dry the paint and then scrape it off with a thin blade. The functions of car paint are: 1. Protect the car from erosion by various corrosive media in the atmosphere; 2. Decorate the car; 3. Identify the type of car; 4. Improve the comfort and sealing of the car, preventing noise caused by vibration.
7
1
Share

How Many Cylinders Does the Focus Engine Have?

The Focus engine is a three-cylinder. The functions of the engine are: 1. To fully combust the fuel input into the cylinders to generate power; 2. To determine the vehicle's power, fuel efficiency, stability, and environmental performance. Taking the 2021 Focus Fengyue model as an example, its body dimensions are: 4647mm in length, 1810mm in width, and 1468mm in height, with a wheelbase of 2705mm and a fuel tank capacity of 53 liters. The 2021 Focus Fengyue model features a MacPherson independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 122ps, a maximum power of 90kw, and a maximum torque of 153nm, paired with a 6-speed manual transmission.
1
2
Share

How many liters of brake fluid are needed for a single replacement?

Brake fluid replacement requires 1 liter. The replacement method is as follows: 1. Turn off the vehicle and open the hood to extract the fluid from the reservoir; 2. Use a funnel to pour the new brake fluid into the reservoir; 3. Lift the vehicle with a jack and remove the tires; 4. Remove the rubber dust cap from the brake caliper; 5. Loosen the bleeder screw and attach a rubber tube to it, connecting it to a drainage bottle; 6. Press the brake pedal and observe the fluid drainage; 7. Start the vehicle and perform a brake test. Brake fluid is composed of castor oil and low-carbon alcohol. Its functions include: 1. Lubricating components of the braking system; 2. Preventing rust and corrosion of brake pads; 3. Assisting in cooling and dissipating heat from the brake pads.
13
3
Share

Is the Three-Way Catalytic Cleaner Useful for Three-Way Catalytic Converter Blockage?

The three-way catalytic cleaner is useful for three-way catalytic converter blockage. Its function is to remove sulfur and phosphorus chemicals from the surface of the three-way catalytic converter, unclog the exhaust pipe blockage, and restore the activity of the three-way catalytic converter. The cleaning steps for the three-way catalytic cleaner are: 1. Start the vehicle for preheating and connect the hanging tube to the three-way catalytic cleaner; 2. Insert the device into the vacuum tube connected to the engine; 3. Start the engine and open the device control valve to allow the three-way catalytic cleaner to form droplets in the viewing window; 4. Keep the engine idling to allow the cleaner to drip completely; 5. After cleaning, turn off the engine and reconnect the pipelines; 6. Let the engine idle to discharge any remaining liquid.
6
0
Share

What Causes Severe Transmission Jerking in the Buick Excelle?

The accumulation of dirt and impurities inside the transmission valve body of the Buick Excelle leads to blockages, preventing effective regulation of oil pressure and resulting in jerking, impact, and slippage issues. Below are relevant details: 1. Naming Convention: The Buick Excelle models are named using a combination of numbers and letters, where the numbers indicate engine displacement and the letters represent the engine type. For example, in '15n,' '15' denotes a 1.5-liter engine, and 'n' signifies a naturally aspirated engine. 2. Dimensions: The Buick Excelle measures 4587mm in length, 1798mm in width, and 1463mm in height, with a wheelbase of 2640mm. It is equipped with a 6-speed DSS intelligent transmission, delivering a maximum power of 120kw and a maximum torque of 230nm.
16
1
Share

Why does the car fail to start due to power steering failure?

Power steering failure preventing the car from starting is caused by a malfunction in the steering wheel assistance system. Here are some maintenance tips for the steering system: 1. Oil level check: With the engine running, ensure the oil level in the reservoir is between the upper and lower marks on the dipstick. 2. Visual inspection: Check the lubrication of mechanical connections in the steering system; open the steering fluid reservoir to inspect the oil level and cleanliness of the steering fluid and filter; examine steering rods and pressure bearings for damage or deformation; start the engine and turn the steering wheel left and right to check for excessive play or looseness in mechanical connections; lift the steering axle and shake the steering wheels up and down to inspect for play in the steering knuckle; start the engine to check the entire steering hydraulic system for oil leaks.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.