VV7 Power Specifications?

1 Answers
StCaden
07/29/25 8:48pm
Here is the introduction to the power specifications of the VV7: 1. The VV7 is equipped with a 2.0-liter turbocharged engine across the entire lineup. This engine delivers 227 horsepower and a maximum torque of 387 Nm. It can output maximum power at 5,500 rpm and maximum torque between 1,800 and 3,600 rpm. 2. This engine features direct fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. It is paired with a 7-speed dual-clutch transmission. The dual-clutch transmission offers high transmission efficiency and fast gear shifting, making it well-suited for use with small-displacement turbocharged engines. 3. The 2.0T turbocharged engine in the VV7 provides relatively strong power, with maximum torque available at just 1,800 rpm. 4. The VV7 uses a MacPherson independent suspension at the front and a multi-link independent suspension at the rear. The multi-link independent suspension enhances wheel contact with the ground, thereby improving traction.
Was this review help?
5
2
Share
More Forum Discussions

Is the Accelerator on the Left or Right?

The accelerator is on the right. Also known as the throttle or gas pedal, it is a control device that regulates the engine's power thrust. The accelerator controls the carburetor's throttle valve opening to adjust the cylinder's filling volume, thereby determining the engine's output power. Precautions for using the accelerator include: 1. Press and release the accelerator pedal gently, ensuring smooth and gradual movements; 2. Coordinate the clutch release with accelerator pressing closely and act swiftly; 3. Select appropriate gears to keep the engine running at medium speeds and larger throttle openings most of the time to save fuel; 4. Before stopping or turning off the engine, release the accelerator pedal first and avoid revving the engine abruptly.
13
1
Share

How many seat belts are there in the back seat of a sedan?

There are 3 seat belts in the back seat of a sedan. When wearing the seat belt, the shoulder strap should cross the chest cavity, and the waist belt should fit snugly against the hip bone. The purpose of this is to ensure that the impact force in the event of an emergency acts on the bones rather than the soft internal organs. After buckling the seat belt, the buckle will make a clicking sound. However, to ensure that the seat belt is properly fastened and not damaged, passengers should still pull on the seat belt to confirm. A seat belt is a vehicle safety device designed to protect vehicle occupants from harmful movements that may occur during a collision or sudden stop. The function of the seat belt is to reduce the possibility of death or serious injury in a traffic collision by minimizing the secondary impact force that poses an internal collision risk. It also ensures that occupants are properly positioned to maximize the effectiveness of airbags (if equipped) and prevents occupants from being ejected from the vehicle or experiencing vehicle rollover during a collision.
10
2
Share

What Are the Effects of a Faulty Exhaust Valve?

Effects of a faulty exhaust valve include: 1. Difficulty starting the engine and weak acceleration; 2. Failure to meet emission standards during annual inspections; 3. Black smoke from the vehicle's exhaust pipe; 4. Unstable idle or stalling at idle; 5. Flashing check engine light; 6. Burning of engine oil; 7. Increased fuel consumption. The causes of a faulty exhaust valve are: 1. Quality issues with the exhaust gas recirculation system itself; 2. Improper maintenance; 3. Issues with fuel quality; 4. Aging of the exhaust valve. The function of the exhaust valve is to appropriately reduce fuel consumption, improve engine efficiency, lower exhaust temperature, and reduce the formation of nitrogen oxides and carbon monoxide.
9
1
Share

What are the symptoms of a bad car clutch plate?

Car clutch plate symptoms include clutch slippage, sluggish acceleration, decreased power, starting slippage, or weak driving performance. The car clutch is located within the flywheel housing between the engine and the transmission, with the clutch assembly secured by screws to the rear plane of the flywheel. The output shaft of the clutch serves as the input shaft of the transmission. During driving, the driver can depress or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine and transmission, thereby interrupting or transmitting the engine's power to the transmission. The driving and driven parts of the clutch utilize friction between contact surfaces or use liquid as a transmission medium (hydraulic coupling) to allow temporary separation and gradual engagement, permitting mutual rotation during power transmission.
17
0
Share

How Should a Driver Handle a Rear Tire Blowout?

When a rear tire blows out, the driver should handle it as follows: 1. First, maintain control of the steering wheel and avoid emergency braking, as this could cause the vehicle to lose control immediately. 2. After stabilizing the direction, the driver can downshift to reduce speed and then brake gently until the vehicle comes to a complete stop. Car tires are one of the essential components of a vehicle, directly contacting the road surface and working with the suspension system to absorb shocks during driving. They ensure good ride comfort and smooth driving, while also maintaining excellent traction between the wheels and the road, thereby improving the vehicle's traction, braking, and off-road capabilities. Based on their applications, tires can be categorized into: passenger car tires, light truck tires, construction machinery tires, off-road vehicle tires, and agricultural and forestry machinery tires.
8
3
Share

Can Toothpaste Remove Car Paint Scratches?

Toothpaste can remove car paint scratches, but only minor ones. Toothpaste contains abrasives, which give it a similar effect to car wax, helping to reduce the appearance of scratches. Additionally, the moisturizers in toothpaste can add shine to the paint, blending with the car's color. Moreover, toothpaste can act as a simple barrier, preventing rust in the short term. Car paint coating involves applying a thin film over the car's paint to maintain its gloss and provide a physical protective layer, thereby preserving the paint's integrity.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.