Vehicle Shakes When Lightly Pressing the Accelerator

2 Answers
MacNadia
09/07/25 5:12am
Vehicle shaking when lightly pressing the accelerator is abnormal and may be caused by faulty spark plugs or clogged fuel injectors. Here is a detailed introduction about automotive spark plugs: 1. Overview: Automotive spark plugs, commonly known as sparkers, function by discharging the high-voltage pulses sent from the high-tension leads (spark plug wires), breaking down the air between the two electrodes to generate an electric spark, thereby igniting the air-fuel mixture in the cylinder. They can generally be categorized into standard spark plugs and insulator-protruding spark plugs. 2. Others: The fundamental conditions for a high-performance engine include high-energy stable sparks, a uniformly mixed air-fuel mixture, and a high compression ratio. The key component of a spark plug is the insulator. The insulator must possess excellent mechanical properties, high voltage resistance, high-temperature impact resistance, and chemical corrosion resistance. Ordinary spark plugs are typically made of alumina-based ceramics.
Was this review help?
12
2
Share
RebeccaAnn
09/19/25 4:29am
Over the years of driving my old car, I've encountered quite a few issues with shaking when lightly pressing the accelerator. Personally, I think the most common causes are problems with the spark plugs or ignition coils. Worn-out spark plugs can lead to unstable ignition, making the engine shake like it's dancing during slight acceleration. It could also be due to a dirty throttle body, where excessive carbon buildup affects air intake and increases fuel consumption. I've tried cleaning the air filter myself, and sometimes it helps alleviate the issue. It's best not to delay fixing it, as prolonged shaking puts extra strain on the engine and can lead to bigger problems, especially at high speeds, which can be more dangerous. Regular maintenance checks on these components, such as replacing spark plugs every 20,000 kilometers, can save you both trouble and money. Last time my car was shaking, replacing the spark plugs fixed it, costing me less than 200 yuan.
Was this review help?
15
3
Share
Expand All
More Forum Discussions

What to Do When the Car Door Freezes and Won't Lock After Opening?

If the car door freezes and won't lock after opening, you can use warm water to melt the ice on the door. It's important to note that you must use warm water, not hot water, as hot water can damage the car's paint. Another possible reason the door won't lock is water ingress. In such cases, it is recommended to start the car and wait for the engine's water temperature to rise. Then, turn on the car's heater to help evaporate the water inside the door. Once the water dissipates, the door should close normally. To prevent the car door from freezing, carefully inspect the door seal for signs of aging or damage. Timely repair and maintenance can effectively prevent the door from freezing.
14
4
Share

What is the reason for the malfunction of Audi's multi-collision brake system?

Audi's multi-collision brake system may not function due to issues with the computer board data. Here is an introduction about automotive brake systems: 1. Introduction: The automotive brake system is the braking device of a vehicle, and almost all brakes used in vehicles are friction-based. 2. Proper usage: (1) Predictive braking: This refers to the driver taking early deceleration measures to stop the vehicle based on their intention or in response to observed situations. (2) Emergency braking: During driving, when encountering sudden hazardous situations, the braking measures taken to quickly stop the vehicle are called emergency braking. (3) Downhill braking: No one would deny that braking is essential when going downhill, but relying entirely on brakes downhill is not advisable.
16
3
Share

What is the formula for homemade tire shine?

Homemade tire shine formula consists of polyurethane emulsion, water, liquid wax, silicone oil, and emulsifier. Below are the detailed introductions of tire shine: 1. Function: The primary function is to restore the original new appearance of the tire, protect against UV damage, prevent rubber from aging, cracking, and fading, and effectively extend the tire's lifespan. It also helps remove oil stains and dirt from the tire, providing protection and preventing tire hardening. 2. Hazards: Tire shine does not harm the tire itself but can be somewhat harmful to the wheel hub due to its corrosive nature, which may corrode the hub. The shine that seeps into the steel rim might increase the gap between the tire and the hub, leading to air leakage and potential safety hazards.
19
0
Share

How to install the navigation system in Roewe i5?

Roewe i5 navigation installation can be done by seeking professional assistance. Introduction: The Roewe i5 is a high-performance internet-connected mid-size car under the Roewe brand. Development History: On June 26, 2019, the Roewe i5 Linghao version was launched. On September 26, 2019, the upgraded Roewe i5 Linghao series was released. In March 2021, SAIC Roewe first revealed the exterior and interior official images of the fourth-generation refined family sedan, the all-new Roewe i5. On April 7, 2021, SAIC Roewe officially announced the pre-sale price of its compact sedan—the new i5, with a total of 4 configuration models released.
7
2
Share

What to Do When the Brake Disc Warning Light Comes On?

The brake disc warning light coming on suggests that the fault cause should be checked promptly. It may be due to severely worn brake pads or insufficient brake fluid level. Here is some related information about brake discs: 1. Material: Brake discs are made of China's gray cast iron 250 standard, abbreviated as HT250, equivalent to the American G3000 standard. The requirements for the three main chemical elements are: C: 3.1~3.4, Si: 1.9~2.3, Mn: 0.6~0.9. 2. Function: Brake discs are used for braking, with the braking force coming from the brake caliper. When the brake is applied, the caliper clamps the brake disc to slow down or stop the vehicle. Brake discs offer effective braking performance and are easier to maintain compared to drum brakes.
2
1
Share

What are the driving techniques for an old eight-speed transmission?

Here are the driving techniques for an old eight-speed transmission truck: 1. Gear shifting: When shifting gears, pay attention to the coordination between the clutch pedal, throttle, and gear lever. The gear lever must be pushed firmly into place to ensure complete gear engagement, avoiding gear damage or automatic disengagement while driving. 2. Upshifting: When upshifting, the speed of releasing the clutch pedal for the second time depends on the gear. For upshifts below medium speed, after shifting to a higher gear, release the clutch pedal to the semi-engagement position slowly to ensure smooth power delivery from the engine; when shifting from medium speed to high speed, the release speed of the clutch pedal should be appropriately increased.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.