Vehicle Scrapping Period?

1 Answers
RyderAnn
07/30/25 5:13am
Vehicle scrapping periods vary depending on the type of vehicle. Below are the scrapping periods for different types of vehicles: 1. Non-commercial passenger vehicles with 9 seats or fewer: Non-commercial passenger vehicles with 9 seats or fewer (including sedans and SUVs) are scrapped after 15 years of use. 2. Tourist passenger vehicles and non-commercial passenger vehicles with more than 9 seats: Tourist passenger vehicles and non-commercial passenger vehicles with more than 9 seats are scrapped after 10 years of use. 3. Commercial large buses: Commercial large buses are scrapped after 10 years of use. 4. Other vehicles: Small and micro non-commercial passenger vehicles, large non-commercial sedans, and wheeled special-purpose machinery vehicles have no usage period restrictions.
Was this review help?
7
2
Share
More Forum Discussions

What Causes the Sudden Silence of the Car Seat Belt Warning Tone?

Faulty cable connection. Here are the relevant details: After starting: The pre-tensioned seat belt cannot be reused after activation and must be replaced along with the retractor and buckle. If the car has been involved in a collision but the pre-tensioner did not activate, it is essential to have the dealership inspect the pre-tensioner system. Replace if necessary. Unauthorized modifications to any components or wiring of the pre-tensioned seat belt system are strictly prohibited. Maintenance: Repairs to the pre-tensioned seat belt system and its surrounding components should be performed by the dealership. Do not alter or cut the SRS wiring. Unapproved electrical testing equipment and diagnostic tools should not be used on the pre-tensioned seat belt system. If you need to handle the pre-tensioned seat belt system or dispose of the vehicle, contact the dealership. Handling procedure: The correct procedure for handling the pre-tensioner is outlined in the repair manual. Incorrect handling may result in personal injury. The pre-tensioner is installed in the front seat belt retractor and anchor, and its usage method is the same as that of a conventional seat belt.
7
1
Share

What are the symptoms of a faulty wheel speed sensor in the Sagitar?

There may be unstable engine idling; momentary stalling or engine shutdown when starting the vehicle or decelerating to a stop while driving. Here are some related solutions: 1. External force breaking the wheel speed sensor wiring harness: For models prior to 2011, the wheel speed sensor wiring harness did not have reserved length, which often led to the harness being broken when the steering wheel was turned to the limit. The issue can be resolved by modifying the wheel speed sensor bracket to create a reserved length for the wiring harness, preventing future damage after replacement. 2. False damage: A dirty sensor head or contamination by magnetic materials can cause the wheel speed sensor to fail. If you notice that the wheel speed sensor frequently malfunctions after driving through water, mud, or sandy areas, it is likely due to dirt and can be cleaned.
12
2
Share

What Causes Water Dripping Under the Car?

The main reasons for water leakage under the car are the following three: 1. Condensation water: Condensation water produced by the air conditioning system during operation drips down. 2. Cooling system: A malfunction in the radiator cooling system causes water leakage under the car. 3. Windshield washer fluid: Windshield washer fluid drips down. Note 1: Apart from the normal drainage phenomena of internal operating systems such as the air conditioning system, muffler, and exhaust pipe, the car chassis is also equipped with specially designed drainage holes to discharge accumulated water from the vehicle body during rain or snow. These drainage holes include the engine compartment drainage hole, sunroof drainage hole, door drainage hole, and trunk drainage hole. Note 2: The engine compartment drainage hole is generally located on both sides of the front windshield wipers. During rainy days, water accumulated in the sunroof flows through the A-pillar conduit to this area, merges with the water in the engine compartment inside the fender, and is discharged near the wheel mudguard. The sunroof drainage hole is usually located at the four corners of the sunroof on the roof. After rainwater enters the drainage hole, it flows through the conduits inside the A-pillar/C-pillar and is eventually discharged through the drainage outlets near the front and rear mudguards at the bottom of the car.
15
1
Share

What is the range for Tesla's remote start?

Generally, the effective range of a car remote key is within 30-50 meters. Below is relevant information: 1. Remote start function: The remote start function allows the vehicle to be started without manually entering the car, by remotely controlling the vehicle. The principle involves sending a signal via the key or a smartphone to remotely start the engine. Smartphone remote control of the car utilizes wireless communication technology, where the basic principle involves using software on the phone to control the car's built-in hardware and software to achieve remote control. 2. Advantages: Intelligent remote start, keyless entry sensing—when carrying the remote or sensor and approaching the car, the car will automatically unlock, allowing you to open the door and enter. After exiting and moving away, the system will automatically lock the car without requiring any manual operation.
11
4
Share

Should You Use the Recirculation Mode When Running Car AC in Summer?

In summer, it is advisable to use the recirculation mode for car air conditioning. This helps reuse the cooled air, reducing cooling energy consumption and consequently lowering engine fuel consumption. However, remember to open windows periodically for ventilation to avoid discomfort caused by stagnant air. The recirculation mode recools the existing cabin air, enhancing cooling efficiency and reducing compressor workload. Precautions for using car recirculation mode: 1. Shortly after entering the vehicle: Open windows or activate fresh air intake mode to introduce outside air. Never drive for extended periods with all windows and doors closed, nor sleep or rest for long durations in a sealed vehicle. 2. When using AC or heating: Occasionally switch to fresh air mode and avoid prolonged use of recirculation. 3. In heavy traffic: Temporarily switch to recirculation mode. Vehicles driving with windows open should close them temporarily.
16
3
Share

Why does the battery light come on in rainy weather?

Main influencing factors are as follows: 1. Battery failure: such as depleted power, battery failure, etc. The solution is to use a multimeter to test the battery voltage. If the voltage is low, recharge it; if the battery fails, replace it. 2. Battery terminals: Loose or oxidized battery terminals causing poor contact can also trigger the battery light. The solution is to clean and tighten the battery connections. 3. Alternator belt: A loose alternator belt or tensioner pulley can cause the charging system to malfunction and illuminate the battery light. The solution is to replace the belt or adjust the tensioner pulley. 4. Alternator voltage regulator: Faulty alternator voltage regulator or excitation circuit issues can cause abnormal operation and trigger the battery light. The solution is to troubleshoot the alternator.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.