Usage Method of the Freelander 2 Diesel Preheating System

How to Solve the Squeaking Noise from Car Doors?

The causes and solutions for squeaking noises from car doors are as follows: 1. Hinge wear: The door and body are connected through hinges, and prolonged use can cause significant wear on the hinges, leading to squeaking noises. Solution: The squeaking noise is mainly caused by friction between the door and hinges. Regularly applying lubricating oil every 2-3 months can resolve the issue. 2. Door limiter problems: Besides hinges, the door and body are also connected by door limiters. Issues with the door limiter can also cause squeaking noises. Solution: Open the door to its maximum position and apply an appropriate amount of grease to all parts of the door limiter. 3. Seal strip issues: Long-term exposure to weather can corrode the seal strip, leading to wind noise and friction sounds. Solution: One method is to apply adhesive tape to the door, which is convenient but not aesthetically pleasing. The other method is to replace the seal strip and regularly clean it to slow down aging and other issues.

9

4

Share

Do Used Cars Still Require Purchase Tax?

Used cars typically do not require the purchase of a purchase tax. A vehicle only needs to pay the purchase tax once, usually when it is bought as a new car. Used cars do not need to pay the purchase tax. However, if the purchase tax was not paid when the car was new, the new owner will need to pay the outstanding purchase tax after the used car transaction. Additional information is as follows: 1. Purchase Tax: The vehicle purchase tax is a tax levied on units and individuals who purchase specified vehicles within China. It evolved from the vehicle purchase surcharge. The current basic regulation of the vehicle purchase tax law is the "Interim Regulations of the People's Republic of China on Vehicle Purchase Tax," implemented from January 1, 2001. 2. Lost Tax Certificate: If the vehicle purchase tax certificate is lost, after the newspaper publishes your loss statement, go to the tax authority to obtain the "Application Form for Vehicle Purchase Tax Replacement and Supplement." Bring the "Application Form for Vehicle Purchase Tax Replacement and Supplement," the newspaper with the loss statement, your ID card, and the vehicle registration certificate to the vehicle purchase tax transfer and supplement window to complete the replacement procedure.

6

2

Share

Which gear to start with in a 12-speed transmission vehicle?

12-speed transmission vehicles typically start in gears 1 to 3. However, since 1st gear provides maximum torque output but results in very slow speed, starting in 2nd or 3rd gear is the optimal choice. Below are relevant details: 1. Starting: In a 12-speed transmission, gears 1 to 6 are considered low gears, while gears 7 to 12 are high gears. When starting, precise coordination between the clutch, accelerator, and handbrake is essential, particularly regarding the timing of releasing the handbrake. For uphill starts, hold the clutch engagement point longer, stabilize slightly, and apply slightly more throttle. A notable advantage of heavy vehicles is that starting in 1st gear provides greater power compared to light vehicles, making it easier to start. 2. Gear shifting: Shift gears promptly to avoid lugging the engine, especially when climbing hills—downshift in advance to maintain reserve power. Use double-clutching for gear changes and add throttle when downshifting. When descending hills, engage lower gears and avoid coasting in neutral.

16

3

Share

What to Do When the Cruze Temperature Gauge Shows Normal but the Radiator Boils Over?

Wait for the vehicle to cool down. Never replace the coolant when the engine is in a high-temperature state. Pour the coolant directly into the reservoir tank and stop filling when the liquid level reaches the upper limit MAX mark. Unscrew the drain plug and continue adding coolant. Once coolant continuously flows out from the drain plug, tighten the drain plug.

6

4

Share

Where is the B-pillar of a car located?

B-pillar is the position between the front door and the rear door of the vehicle. The main function of the B-pillar is to withstand the impact force from the side, fully ensuring the safety of the driver and passengers, while also playing a role in supporting the vehicle structure. It is an essential part of the entire car body. Here is some extended information: 1. It is not recommended to purchase vehicles with replaced B-pillars: It is not advisable to buy such vehicles. Although new parts have been replaced, the integrity of the car body has been compromised. In the event of an accident, the B-pillar will not be able to withstand the impact force from the vehicle, thereby posing certain risks to the driver and passengers inside. Vehicles with replaced B-pillars can be considered as major accident vehicles. 2. Models without B-pillars: BMW's i3 model adopts a design without a B-pillar. Such models must use coach doors (suicide doors). At the same time, the safety of the vehicle cannot be guaranteed, and the performance in vehicle crash tests is relatively poor, mainly because there is no supporting point on the side of the vehicle. From this perspective, the B-pillar cannot be omitted.

17

5

Share

How to Determine Brake Pad Thickness?

A new brake pad typically has a thickness of around 15mm, which gradually wears down with use due to friction. Professional technicians recommend that when visual inspection shows the brake pad thickness has reduced to approximately one-third of its original thickness (about 5mm), vehicle owners should increase self-inspection frequency and prepare for replacement. Additional information is as follows: 1. Classification: Brake pads are mainly divided into the following categories: metallic brake pads and carbon-ceramic brake pads. Metallic brake pads are further classified into low-metallic and semi-metallic brake pads, with ceramic brake pads falling under the low-metallic category. Carbon-ceramic brake pads are used in conjunction with carbon-ceramic brake discs. 2. Braking Principle: The working principle of braking primarily relies on friction, utilizing the friction between the brake pads and brake discs (or drums), as well as between the tires and the ground, to convert the kinetic energy of the moving vehicle into thermal energy through friction, thereby stopping the vehicle. An efficient and effective braking system must provide stable, sufficient, and controllable braking force, along with good hydraulic transmission and heat dissipation capabilities, to ensure that the force applied by the driver on the brake pedal is effectively transmitted to the master cylinder and slave cylinders, while avoiding hydraulic failure and brake fade caused by excessive heat.

7

5

Share

Usage Method of the Freelander 2 Diesel Preheating System

How to Solve the Squeaking Noise from Car Doors?

Do Used Cars Still Require Purchase Tax?

Which gear to start with in a 12-speed transmission vehicle?

What to Do When the Cruze Temperature Gauge Shows Normal but the Radiator Boils Over?

Where is the B-pillar of a car located?

How to Determine Brake Pad Thickness?

How much fuel does a Volkswagen Bora consume for 300 kilometers?

What to Do When the Cruze Anti-Theft Lock Light Is On and the Car Won't Start?

How to resolve the Camry C1201 fault code?

How many driver's licenses can be deducted for one car?