···
Log in / Register

Usage and Precautions for Windshield Wipers

4 Answers
LeJaxson
07/29/25 8:39pm

Here are the precautions for windshield wipers: 1. Do not operate the wipers without spraying windshield washer fluid, as dry wiping can cause abnormal wear to the wiper rubber and damage the wiper motor. 2. If the windshield is excessively dirty, first clean the debris on the windshield with a dry cloth to reduce unnecessary wear on the wipers. 3. When the wiper blades are not wiping effectively, try soaking them in water first, then sand the blades back and forth with water sandpaper, rinse them thoroughly with clean water, reinstall them on the windshield, and test the wipers to check for any uneven areas. This method is often used for minor damage to the wiper blades. 4. In rainy southern regions where wipers are used more frequently, the replacement interval can be shortened as needed to ensure a clear and clean view during rainy weather.

Was this review help?
14
5
Share
KaydenLee
08/14/25 5:52pm

I drive every day and use the wipers frequently. The operation is simple: there's a wiper control stalk next to the steering wheel—push it up to activate, with slow, medium, and fast settings to handle different rain intensities—use slow for light rain, medium for moderate rain, and fast for heavy downpours. Don’t forget the washer function; press the spray button to apply washer fluid for better cleaning. But key details matter: when the rubber blades age, they may streak or squeak, so replace them every six months; avoid dry wiping to prevent blade damage; in winter, defrost ice with warm air first to avoid motor burnout; regularly check washer fluid levels and refill to prevent glass scratches. When cleaning the windshield, turn off the wipers; park in shade during hot weather to extend blade life. Overall, combining daily use with proper care ensures more durable wipers and safer driving.

Was this review help?
5
3
Share
Expand All
LeilaniFitz
10/16/25 5:45am

As a safety-conscious driver, wipers are essential in harsh weather. Adjust speed settings to match rainfall intensity: after activation, observe wiping effectiveness and seek immediate repair if water streaks or skipping occur. Key precautions: test functionality monthly; use antifreeze washer fluid in winter to prevent freezing; combine with defogger in rain/fog for clear visibility; avoid prolonged high-speed wiper use to prevent overheating; replace aged rubber strips promptly to eliminate hazards. Never force frozen wipers - use dedicated ice scrapers; check rubber elasticity in spring; ensure system reliability during rainy drives. Remember: prevention-first approach minimizes driving risks.

Was this review help?
8
1
Share
Expand All
PeterLynn
11/29/25 6:32am

I enjoy DIY car maintenance, and wiper care is fundamental. After use, clean the rubber blades and dust on the glass to prevent clogging; replace the rubber blades every six months or when they don't wipe clean—selecting the right size makes installation easy. Precautions: avoid dry wiping to prevent damaging the rubber blades; when parked, stand the blades up to protect them from sun damage; during car washes, wipe gently to avoid pressure damage; use dedicated windshield washer fluid and avoid mixing; in winter, cover the wipers when parked outdoors to prevent freezing and cracking. Proper maintenance ensures efficient wiper operation and safe driving.

Was this review help?
16
3
Share
Expand All
More Forum Discussions

Why does the reverse camera light turn on but not display the image?

Possible reasons and solutions for the reverse camera light turning on but not displaying the image are as follows: 1. Display settings issue: There is usually a camera switch control in the display settings; simply adjust the switch to "ON". 2. Wiring problem: This is the most common issue. Since the wiring harness for the reverse camera runs from the dashboard all the way to the trunk, the long route increases the likelihood of a loose connection or poor contact at some point, requiring careful inspection. 3. Scratched reverse camera: The surface of most cameras is quite fragile, so it's advisable to apply a protective film over the camera lens.
15
4
Share

What Causes the EPC Light to Illuminate and the Vehicle to Shake in a Passat?

The most likely cause of the Passat shaking when the EPC warning light is on is a malfunction in the throttle control unit. Here is more relevant information: 1. Main reasons for the EPC light to illuminate: (1) It may be caused by a dirty throttle body. In this case, simply cleaning the throttle body and then performing a reset can resolve the issue. (2) Other potential causes include a faulty throttle control unit, damaged engine control wiring harness, malfunctioning accelerator pedal position sensor, leaks in the crankcase ventilation system, intake system leaks, faulty brake light switch, or burnt-out brake light bulbs. 2. Measures to prevent the EPC indicator light from illuminating: Regular maintenance should be performed when the vehicle reaches a certain mileage to ensure optimal performance and to prevent the EPC light from illuminating due to engine carbon buildup. The vehicle should be fueled with the recommended gasoline grade, as using the appropriate fuel plays a significant role in protecting the engine and throttle body, effectively reducing carbon buildup and maximizing the vehicle's operational power.
9
0
Share

Is it mandatory to install ETC in cars?

It is not mandatory to install ETC. According to the regulations of the State Council, starting from 2020, vehicles without ETC will not enjoy toll discounts. In the future, only one manual lane will be retained at highway toll stations, and vehicles without ETC will have to pay tolls through manual lanes. Additionally, newly installed ETC devices cannot be used on highways immediately; they need to be activated first. During free holiday periods, vehicles with ETC can still use highways, and no fees will be deducted for ETC users passing through ETC lanes. ETC Billing Principle: There will be one or more ETC lanes on highways. Through dedicated short-range microwave communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, the system uses computer networking technology to settle payments with banks in the background. This allows vehicles to pay tolls without stopping at highway or bridge toll stations, all based on the principle of "pass first, deduct later." Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Promotes low-carbon travel by reducing noise and exhaust emissions since vehicles do not need to stop at toll stations; Reduced wear and tear: Saves costs by minimizing vehicle starts and brakes, reducing wear and fuel consumption. Users also enjoy a 5% discount on toll fees; Improved efficiency: ETC lanes can theoretically increase traffic flow efficiency by 2-3 times, making traditional ETC faster, more advanced, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council explicitly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation cards in key city clusters will be basically achieved, and the proportion of vehicles equipped with ETC will significantly increase." It also set a target in the "13th Five-Year Plan" for comprehensive transportation development: "By 2020, the ETC usage rate for road passenger vehicles should reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and increasing the ETC adoption rate for passenger vehicles, efforts will be made to promote ETC usage for trucks in the future. There will also be exploration of deeper integration between ETC systems and smart transportation directions such as vehicle-to-vehicle communication and vehicle-to-infrastructure coordination, providing car owners with comprehensive travel services. This means more application scenarios will support ETC usage.
18
0
Share

What are the symptoms of a seized engine?

Engine seizure symptoms include abnormal engine noise, lack of power, noticeable exhaust emissions, stalling at idle, etc. A seized engine can be repaired by boring the cylinder and replacing the piston. The relevant information about engine seizure is as follows: Causes of engine seizure: The causes of engine seizure include poor cylinder lubrication, insufficient break-in, cooling issues, abnormal piston ring operation, use of low-quality fuel, and incorrect repair or assembly. Solutions for engine seizure: If detected early, it can be repaired at a maintenance shop by simply boring the cylinder and installing oversized pistons. If the cylinder wall scratches are too deep or the piston components are severely worn, repair may not be feasible, and a major overhaul with replacement of new components is necessary. In severe cases, the entire cylinder block may need to be replaced.
12
0
Share

What can be inferred when the headlight illumination distance changes from near to far?

When the headlight illumination distance changes from near to far, the following conditions can be inferred: 1. The car is on an uphill or downhill road: When the headlight illumination distance changes from far to near while driving, it indicates that the car is approaching an uphill section, or the downhill section is nearing the bottom of the slope, or it may be approaching a curve; 2. The current terrain is complex: When the headlight illumination distance changes from near to far, it indicates that there is a sharp curve or a large pothole ahead, or the car is reaching the top of an uphill slope, or the car is about to descend a steep slope; 3. Understanding nighttime driving lights: During nighttime driving, due to the limited illumination range and visibility (visibility is only 1/8 of that during the day), the driver's view is constrained. Sometimes, the lights may flicker, making it difficult to quickly discern the terrain, which can even lead to illusions. Additionally, during nighttime driving, the driver's vision deteriorates, and their mental state is highly concentrated. Therefore, for drivers, understanding the characteristics of nighttime driving and mastering the general rules of nighttime driving is very important.
1
3
Share

Where is the Body Stability Control Module Located on the Baojun 730?

The body stability control module of the Baojun 730 is installed in the glove compartment, and the module has two connectors. Principle of the Body Stability Control Module: When a car is turning, if the front wheels first reach the adhesion limit, it will cause a "drift out" phenomenon. At this time, no matter how the driver turns the steering wheel, the turning radius cannot be reduced, making it difficult to follow the track, resulting in steering failure, known as understeer. If the rear wheels first reach the adhesion limit, a "fishtail" phenomenon will occur, making the car itself unstable, and the car is quickly pulled to the side of the turn, known as oversteer. The role of the body stability control system is to control the engine power output via computer when understeer causes the vehicle to slide outward, or when oversteer causes the vehicle to cross the centerline of the road or even spin in place. It changes the braking force on one or two wheels to generate corresponding torque, eliminating understeer or oversteer phenomena and improving driving dynamic stability. The ABS system ensures vehicle stability during braking, the TRC system maintains vehicle stability during acceleration, and the VSC system keeps the vehicle stable during turns. During emergency braking, ABS prevents wheel lock-up; when wheels slip, TCS controls engine output and wheel braking to prevent wheel slip. The body stability control system works when the vehicle is turning quickly, dodging, or avoiding suddenly appearing cars or animals. It uses computer control to adjust engine output and apply braking force to any wheel (with varying degrees of braking force) to eliminate understeer or oversteer, enhancing dynamic driving stability.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.