Under which brand is the Lynk & Co 03?

What are the new regulations for wheel modification dimensions?

According to the new regulations for wheel modification, only the style can be changed, not the size. Large wheels cannot be replaced, but the style of wheels of the same size can be modified. Wheel maintenance methods: When the vehicle is in a humid area, the wheels should be cleaned frequently to prevent salt from corroding the aluminum surface. If necessary, after thorough cleaning, wax can be applied to the wheels to maintain their shine. When the wheels are hot, they should be allowed to cool naturally before cleaning. Do not use cold water for cleaning, as it may damage the aluminum wheels, cause deformation of the brake discs, and affect braking performance. Using cleaning agents on the wheels may cause chemical reactions on the surface, leading to loss of shine. Precautions for replacing car tires: When selecting tires, the specifications must be the same as the previous tires and must match the other tire on the same axle, including speed rating, load index, tread pattern, brand, size, etc., to ensure safe driving. The valve stem should also be replaced because the aging cycles of new tires and old valve stems differ. During the lifespan of the new tires, the valve stem may develop issues, which are not easily noticeable. Therefore, it is best to replace the valve stem when changing tires. Installation direction and inflation: If using the original factory tires, follow the manufacturer's installation instructions. For non-original tires, the side with the production date usually faces outward. For directional tires, align the arrow on the wheel with the direction of the car's forward movement. During inflation, fill the tire to the maximum allowed pressure first, then reduce it to the manufacturer's recommended standard pressure.

20

1

Share

Where is the oil filter of Baojun 310 located?

It is located under the engine. You can remove it using a special tool or a wrench of the same size. However, it is important to drain the engine oil first. There is a drain plug at the bottom of the engine; loosening it will allow the oil to drain out, and you should use a container to collect the oil. Below is some relevant information: 1. The oil filter, also known as the oil filter element, for the Baojun 310 is the Mann W7012 model. The oil filter is a device that filters out impurities from the engine oil. In the engine lubrication system, the oil filter plays a crucial role, so it should be replaced every time the engine oil is changed. 2. Oil filters can be structurally divided into two types: integrated and cartridge-style. The integrated type can be unscrewed and replaced as a whole, while the cartridge-style only requires replacing the filter element. 3. An oil filter generally consists of components such as the housing, filter element, bypass valve, check valve, and sealing ring, and is usually located on the main oil passage of the engine block. The engine's oil pump draws oil from the oil pan and delivers it to the oil filter. After passing through the oil filter to remove impurities, the oil flows through various passages to different parts of the engine. Regardless of the oil's usage, the shelf life of an oil filter is three years. After three years, the filtering capacity of the filter element inside the oil filter will significantly decrease, making it unable to effectively filter impurities from the oil.

20

4

Share

When to Turn the Steering Wheel for a Right-Angle Turn?

The right-angle turn test requires the driver to navigate a prescribed route at a low speed without stopping, completing the turn in one continuous motion. The vehicle can make a right-angle turn from left to right or from right to left. "Full lock and straighten" is a method to execute a right-angle turn, with the following specific steps: I. Full Lock 1. Preparation for the Turn: Drive close to the outer edge of the road in advance. 2. Timing for the Turn: When the bumper aligns parallel with the inner right angle. 3. Technique: (1) Full Lock: Complete in one motion, turning the wheel to its limit until a "click" sound is heard, turning slightly more than 3 full rotations. (2) Hands remain on the wheel, continuously turning 3 full rotations while simultaneously shifting hands 3 times: First, turn the wheel in the direction of the turn, then use the other hand to pull in the same direction, while the turning hand continues to turn without leaving the wheel, completing 3 full rotations. At this point, a slight additional turn and pull should produce the "click" sound, after which you can stabilize the wheel and adjust hand position. The most effective force application occurs during the upward motion and upper half of the steering wheel rotation. Between the 4 o'clock and 8 o'clock positions, turning the wheel is less effective, and pulling should be prioritized over turning. II. Straighten 1. Timing: When the vehicle is about to align straight. 2. Technique: Use one hand to turn the wheel continuously for 3 full rotations in the direction of the turn.

3

Share

What are the reasons why the sunroof of Audi Q3 cannot be opened?

Check if the fuse of the electric sunroof has blown; check if the switch of the electric sunroof is damaged; check if the drive motor of the electric sunroof is working—you can listen for the sound of the motor operating. Additionally, if the sunroof doesn’t close tightly, it may be due to obstructions or deformations in the sunroof’s sliding tracks, rust, or poor lubrication. Below are some car sunroof maintenance tips: 1. Pay attention to the condition of the sunroof tracks: Electric sunroofs are enjoyable to use, provided that the track mechanism is in a "healthy state"—free of obstructions, deformations, and well-lubricated. Owners should regularly inspect the sunroof tracks. 2. Avoid excessive use of the sunroof: Although the sunroof is part of the car’s windows, its mechanical structure differs from that of the side windows, so it should not be used too frequently. 3. Do not open the sunroof immediately in cold winter weather: In northern winters, the car may sit overnight, and the edges of the sunroof could freeze due to dew, making it temporarily impossible to open. In such cases, owners should avoid opening the sunroof immediately, as accumulated snow in the tracks can increase resistance, and forcing the sunroof open may burn out the motor. 4. Avoid opening the sunroof on bumpy roads: If driving on uneven terrain, it’s best not to open the sunroof. Driving on rough roads not only makes the ride uncomfortable for passengers but can also cause damage to the sunroof mechanism.

2

1

Share

JAC Refine S3 Fuel Filter Replacement Tutorial

The JAC Refine S3 fuel filter is built-in and located inside the fuel tank. To replace it, you need to open the fuel tank cap, remove the fuel pump assembly, take out the old fuel filter, install the new one, and then reassemble everything. Below is some relevant information: 1. The main function of the fuel filter is to remove impurities from the gasoline. If the fuel filter becomes too dirty or clogged, the main symptoms include: slow or no response when accelerating, difficulty starting the car, and sometimes requiring 2-5 attempts to start. Most engines are equipped with disposable, non-cleanable paper element fuel filters. The filter has inlet and outlet arrows marked on it; make sure not to install it backward during replacement. The fuel filter is commonly referred to as the fuel filter. There are carburetor-type and fuel injection-type fuel filters. For carbureted gasoline engines, the fuel filter is located on the inlet side of the fuel pump, operating under lower pressure, and usually has a nylon housing. For fuel-injected engines, the fuel filter is located on the outlet side of the fuel pump, operating under higher pressure, and typically has a metal housing. 2. The filter element of the fuel filter is mostly made of filter paper, but some use nylon cloth or polymer materials. Its main function is to filter out impurities from the gasoline. If the fuel filter becomes too dirty or clogged. In-line paper fuel filters: In this type of fuel filter, folded filter paper is connected to both ends of a plastic or metal filter. Dirty fuel enters and passes through layers of filter paper from the outer wall of the filter to the center, allowing clean fuel to flow out.

1

2

Share

What is the firing order of the six cylinders in an Audi A6?

Facing the direction of vehicle travel, the three cylinders on the right side are numbered 1, 2, and 3 from front to back, while the left side has cylinders 4, 5, and 6. The firing order is 1-4-3-6-2-5. Below is some related information about the A6L: 1. Body dimensions: The Audi A6L is a vehicle series developed by FAW-Volkswagen Audi based on the new German A6. The car's length, width, and height are 5036mm, 1874mm, and 1466mm respectively, with a wheelbase of 3012mm. 2. Configuration: All engines in the Audi A6L series feature direct fuel injection technology, offering four comprehensively upgraded gasoline engines: 2.0TFSI, 2.5FSI, 2.8FSI, and 3.0TFSI.

13

3

Share

Under which brand is the Lynk & Co 03?

What are the new regulations for wheel modification dimensions?

Where is the oil filter of Baojun 310 located?

When to Turn the Steering Wheel for a Right-Angle Turn?

What are the reasons why the sunroof of Audi Q3 cannot be opened?

JAC Refine S3 Fuel Filter Replacement Tutorial

What is the firing order of the six cylinders in an Audi A6?

Where is the Cabin Air Filter Located in a Volkswagen Passat?

Where is the computer diagnostic connector for the Fengguang 330 located?

What are the differences between the Highlander Elite and Luxury editions?

Where is the wireless charging button for GAC Trumpchi?