Under which brand is MG affiliated?

1 Answers
LouisDella
07/30/25 9:05am
MG is a British-born automobile brand. In 2005, Nanjing Automobile Group acquired the MG brand and all its technologies for £53 million. In 2007, Shanghai Automotive Industry Corporation (SAIC) merged with Nanjing Automobile Group, making MG a brand under SAIC, which remains the case today. Here is some relevant information: 1. Models: MG's lineup includes models such as the MG6, MG3, MG GS, MG GT, MG ZS, MG6 Plug-in Hybrid, MG HS, and MG EZS. 2. MG's positioning: MG is positioned as a mid-to-low-end independent brand, primarily targeting young consumers in the mid-to-low-end market. Its product designs follow a sporty style, which is currently mainstream.
Was this review help?
6
5
Share
More Forum Discussions

What are the sensors in Skoda Octavia?

Octavia vehicle sensors are input devices for the car's computer system. They convert various operating condition information during the car's operation, such as speed, temperature of various media, and engine operating conditions, into electrical signals and transmit them to the computer to ensure the engine operates in the optimal state. The main sensors and their locations are as follows: 1. Oxygen sensor: Installed on the exhaust pipe, it monitors the post-combustion gases to determine whether the engine combustion is sufficient and whether the mixture is too lean or too rich. 2. Wheel speed sensor: It primarily collects the car's rotational speed to detect any signs of wheel slip. 3. Coolant temperature sensor: Usually located near the thermostat, it converts the coolant temperature into an electrical signal. At low temperatures, it increases fuel injection or advances the ignition timing angle, while at high temperatures, it prevents knocking by retarding the ignition timing angle. 4. Intake pressure sensor: Typically installed near the throttle valve, as the name suggests, it senses a series of resistance and pressure changes according to the engine's varying speed and load, converting them into voltage signals for the ECU to adjust fuel injection and ignition timing angles.
2
4
Share

What does MHEV mean in cars?

MHEV in cars refers to Mild Hybrid Electric Vehicles. Mild hybrid vehicles show significant improvements in smoothness and driving quality compared to traditional fuel-powered cars. Typically, these are vehicles equipped with an internal combustion engine that includes an electric component, allowing the engine to shut off when the car is coasting, braking, or stopped, and to restart quickly. Below is more information about mild hybrid electric vehicles: 1. Mild hybrid electric vehicles can utilize regenerative braking and provide a certain level of power assistance to the internal combustion engine (ICE), but they do not have a pure electric propulsion mode. 2. Advantages of mild hybrid vehicles: Mild hybrid vehicles may offer some benefits of hybrid technology application while incurring less cost-weight penalty compared to installing a full hybrid series-parallel drivetrain. Since this design does not facilitate high levels of regenerative braking or necessarily promote the use of smaller, lighter, and more efficient internal combustion engines, the fuel savings are usually lower than what would be expected with a full hybrid design. 3. General Motors' mild hybrid vehicles include the Parallel Hybrid Truck (PHT) and many cars and SUVs equipped with the BAS hybrid system, typically using 36 to 48-volt systems to provide the necessary power for the starter motor.
16
5
Share

What is the specific oil model for Citroen C5?

The suitable oil model for Citroen C5 is 5W-30, but 5W-40 is also applicable. These two oil models, 5W-30 and 5W-40, have the same low-temperature fluidity but differ in high-temperature performance. The 5W-40 offers better high-temperature protection and sealing performance. However, due to its higher viscosity, it increases engine running resistance and fuel consumption. Additional information: 1. Owners can choose based on their needs and also consider factors such as driving environment and habits. If the owner drives aggressively, frequently in congested areas, or the vehicle is older, using the higher viscosity 5W-40 oil may be considered for better engine protection. 2. When selecting an oil brand, if longevity is a priority, Mobil oil is recommended; for cleaning performance, Shell oil is suggested; for strong oil film toughness, Castrol is advocated. For example, turbocharged engines, which are prone to carbon buildup at high speeds, may benefit from Shell oil's strong cleaning capabilities.
1
5
Share

How to Turn on the Cold Air in BYD S6 Air Conditioning?

Here are the steps to turn on the cold air in BYD S6 air conditioning: 1. Start the vehicle and wait for all components to power on; 2. Press the A/C button and turn on the fan switch; 3. Turn the temperature control knob to the blue side to release cold air, then adjust the fan speed and set the temperature as needed. Below is a brief introduction to the BYD S6: 1. The BYD S6 is BYD's first SUV, positioned as a mid-to-high-end domestic SUV, which was launched in September 2010. Its dimensions are 4810/1855/1680mm in length/width/height, with a wheelbase of 2720mm, ranking among the top in its class. A minimum ground clearance of 190mm ensures excellent off-road performance. 2. In terms of powertrain, the S6 offers three engine options: 1.5T, 2.0L, and 2.4L, available in four trims: Manual Luxury, Manual Premium, Automatic Premium, and Automatic Ultimate. It is equipped with either the BYD483QB or Mitsubishi 4G69 engine. The BYD483QB is a self-developed engine by BYD, featuring Bosch's electronic fuel injection management system and BIVT variable intake system. The BYD S6 boasts a stylish and dynamic exterior with bold lines, showcasing the free-spirited temperament of an urban SUV.
8
0
Share

What is the full name of the Lynk & Co 03?

Lynk & Co 03's full name is Lynk & Co 03, the third mass-produced model under the Lynk & Co brand. Lynk & Co is a premium brand with European technology, European design, global manufacturing, and global sales. In August 2017, Geely Auto, Volvo Cars, and Geely Holding Group signed a joint venture agreement, making Lynk & Co a premium joint venture brand between Geely Auto and Volvo Cars. Below is an introduction to the Lynk & Co 03: 1. In terms of configuration, it features three-screen interaction, cloud connectivity, remote APP control, 17 intelligent driving assistance technologies, and active and passive safety technologies. The Lynk & Co 03 2.0TD adds driver's seat memory and ventilation functions on top of the 1.5TD model's configuration. 2. In terms of power, the Lynk & Co 03 is equipped with a high-efficiency 1.5TD engine from the Drive-E series. The turbo starts to engage at 1000rpm, delivering 150N·m of torque. At 1500rpm, the engine reaches its maximum torque of 265N·m. The turbo engages quickly, providing rapid low-speed response, making hill climbing and overtaking easier. The 0-100km/h acceleration time is just 7.9 seconds.
10
4
Share

How to fold down the rear seats of Mazda CX4?

CX4 rear seat folding methods are as follows: 1. Using the remote handle: 1. First, lower the headrest all the way down, down, down; 2. Check and confirm there are no items on the rear seats or in the cup holders, open the rear hatch and pull the remote handle to lower the seat back you want to fold. 2. Using the push button: 1. First, lower the headrest all the way down; 2. Then press the button to fold down the seat back. Precautions: 1. When folding the seat back forward, always support the seat back with your hand to avoid injuring your fingers or hands; 2. Before folding the seat back with the remote handle, ensure there are no cups in the rear cup holders, otherwise, the seat bottom and back may get dirty or damaged; 3. Be cautious when using the remote handle: (1) On a downhill slope, the seat back may fold forward faster than on flat ground; (2) On an uphill slope, the seat back may not fold up. If the remote handle cannot fold the seat back, you can pull the rear seat back forward from inside the car. 4. Before folding the rear seat backs, check the position of the front seats. Depending on the front seat position, they may collide with the rear seat backs, scratching or damaging the front seats or their pockets. If necessary, the headrests can be removed.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.