Under what conditions will the airbag deploy?

1 Answers
SanLandon
07/30/25 4:33am
Conditions for airbag deployment: The airbag requires appropriate speed and collision angle to deploy. Theoretically, the airbag may only deploy when the vehicle impacts a fixed object head-on at an angle of approximately 60° with a speed exceeding 30 km/h. Below is the working principle of airbags: When sensors detect a vehicle collision, the gas generator triggers ignition to initiate an explosive reaction in the airbag, generating nitrogen or releasing compressed nitrogen to inflate the airbag. When passengers come into contact with the inflated bag, the airbag absorbs collision energy through cushioning, thereby protecting the occupants.
Was this review help?
7
1
Share
More Forum Discussions

Which country does Dongfeng Peugeot belong to?

Dongfeng Peugeot is a French automobile brand. Its vehicle lineup includes models such as the Peugeot 408, Peugeot 508, Peugeot 5008, Peugeot 4008, and Peugeot 2008. Taking the 2020 Peugeot 408 10th Anniversary Edition as an example, it is a compact 4-door 5-seater sedan with body dimensions of 4750mm in length, 1820mm in width, and 1488mm in height, with a wheelbase of 2730mm. The 2020 Peugeot 408 10th Anniversary Edition is equipped with a 1.2T turbocharged engine and a 6-speed dual-clutch transmission, delivering a maximum power of 100 kilowatts and a maximum torque of 230 Newton-meters.
16
5
Share

What documents are needed for maintenance at a 4S shop?

The documents required for maintenance at a 4S shop include the car maintenance manual, the owner's ID card, and the vehicle license. For the first maintenance, the required documents include the driver's license, vehicle license, first maintenance voucher, and purchase certificate. Car maintenance refers to the preventive work of regularly checking, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the relevant parts, also known as car maintenance. The first maintenance of a new car is usually provided free of charge by the 4S shop, and some brands even provide the first two free maintenance services. The first maintenance usually only involves changing the engine oil and oil filter and checking the condition of the car, and does not involve a large number of inspection and replacement items. For car maintenance, you need to bring the vehicle maintenance manual. Under normal circumstances, no additional documents are required for vehicle maintenance. If maintenance is performed at a dealer, each time a regular maintenance is completed, the dealer's after-sales service consultant will make a detailed record of the maintenance in the corresponding position of the maintenance manual, which can prove that the vehicle has completed the maintenance as required. Maintaining the vehicle as required can avoid the loss of warranty eligibility. The maintenance manual is very important and should be kept properly. The first maintenance of a car generally includes the following items: Check whether the level of the car's coolant meets the specified requirements. Check the level of the brake and clutch fluid. Check whether the oil level of the power steering oil tank meets the specified requirements. Check whether there is any oil leakage at the oil pipe interfaces of the system. Check the level of the battery fluid and the windshield washer fluid. Check the tightness and aging of the belts of the generator, air conditioner, water pump, and power steering pump. Check whether the front and rear lights of the car are complete (including headlights, width lights, turn signals, brake lights, reverse lights, and fog lights). Check the tire pressure and wear of the car, tighten the tire screws according to the specified torque, supplement the tire pressure to the specified value of the model, and rotate the tires according to the wear condition. Check whether the car's exhaust emissions meet the standards.
4
3
Share

What are the symptoms of a blown cylinder head gasket in a Cruze?

The symptoms of a blown cylinder head gasket in a Cruze include: 1. A decrease in engine power; 2. Lack of acceleration when driving; 3. An increase in engine coolant temperature, with abnormal readings; 4. Insufficient antifreeze in the engine; 5. Presence of water in the engine oil or oil in the antifreeze. The Cruze is a compact 5-door, 5-seat hatchback with body dimensions of 4450mm in length, 1807mm in width, and 1459mm in height, with a wheelbase of 2700mm. It is equipped with a 1.5L naturally aspirated engine and a 6-speed automatic transmission, delivering a maximum power of 84 kW and a maximum torque of 146 Nm.
11
5
Share

How to make the wipers stand up on Changan CS35?

To make the wipers stand up on Changan CS35, follow these steps: 1. Turn the key from ON position to OFF position; 2. Push the wiper lever forward from its OFF position; 3. Hold for more than 1 second to make them stand up. The Changan CS35 is a compact 5-door 5-seat SUV with body dimensions of: length 4170mm, width 1810mm, height 1670mm, and wheelbase of 2560mm. It is equipped with a 1.6L engine and 4-speed automatic transmission, delivering maximum power of 92kW and maximum torque of 160Nm. The drivetrain is front-wheel drive, with MacPherson strut front suspension and torsion beam rear suspension.
11
3
Share

What causes the squeaking sound when turning the steering wheel back and forth in a Kia K3?

The reasons for the squeaking sound when turning the steering wheel back and forth in a Kia K3 are: 1. Insufficient lubrication of the steering column, causing high friction; 2. Lack of power steering fluid; 3. Universal joint failure; 4. Aging of the rubber bushings in the chassis suspension stabilizer bar links; 5. Faulty thrust bearing; 6. Power steering system malfunction; 7. Poor driving habits, such as excessive braking; 8. Abnormal wear on the brake disc and brake pad surfaces. The Kia K3 is a compact 4-door, 5-seater sedan with body dimensions of 4660mm in length, 1780mm in width, and 1450mm in height, with a wheelbase of 2700mm. It is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 96 kW and a maximum torque of 211 Nm.
15
4
Share

How to Clean Cement Stains from a Car?

Methods for cleaning cement stains from a car include: 1. Spray white vinegar on the cement, wait a few seconds, then rinse with water, repeating several times if necessary; 2. Use a specialized cement remover; 3. Wet the car body to soften the cement, then use a wool glove and car wash soap to wipe or rinse with a high-pressure water gun. Car maintenance methods include: 1. Regularly check tire pressure; 2. Pay attention to tire appearance changes and wear; 3. Regularly clean, maintain, and disinfect the interior; 4. Inspect the chassis to avoid excessive damage from foreign objects; 5. Turn on the ignition before starting the engine, do not start directly; 6. Regularly check the brake pads.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.