Under what circumstances will you be photographed for using a phone while driving?

1 Answers
Gayle
07/25/25 1:31pm
Using a handheld phone while driving is not allowed. Electronic surveillance cameras monitor such behavior, and violations will be photographed and recorded, resulting in fines and penalty points. The cameras can capture the driver's face when photographing phone use, so only the driver can handle the penalty with their own driver's license. According to the "Road Traffic Safety Violation Scoring Management Measures" implemented on April 1, 2022, drivers who make or answer handheld phone calls or engage in other behaviors that hinder safe driving will be penalized with 3 points deducted and a fine ranging from 20 to 200 yuan. 【The manifestations of driving behavior】include slow-moving traffic, intermittent driving, waiting at traffic lights, etc. 【Behaviors that hinder safe driving, such as making or answering handheld phone calls】include using a handheld device to make or receive calls, or holding a phone or other electronic device to send/receive text messages or WeChat messages, watch videos on apps like Douyin, Kuaishou, or Weibo, or play games. Even if the phone is mounted on a holder, performing actions like sending/receiving messages, watching videos, browsing apps, or playing games by viewing or operating the device is similarly dangerous as it diverts attention to the screen, and thus is also considered a violation. However, using hands-free car phones, phone headsets, or speakerphone functions that do not require holding the device and do not affect safety is not considered a violation of handheld phone use. Although using Bluetooth is not penalized, it is still discouraged as it can distract the driver and compromise road safety.
Was this review help?
9
2
Share
More Forum Discussions

How Can a China III Vehicle Be Licensed?

No, China III vehicles refer to those that comply with the China III emission standards. Models meeting the China III emission standards can no longer be sold or licensed after 2011, but those already licensed can continue to be used. Below is relevant information about the China III standard: 1. Definition of China III Standard: The China III standard refers to the third stage of China's automotive emission standards. The national third-stage emission standard is equivalent to the European Euro III emission standard, meaning the content of tailpipe pollutants is equivalent to that of Euro III. The difference is that new vehicles must be equipped with an OBD, or On-Board Diagnostics system. 2. On-Board Diagnostics System: The On-Board Diagnostics system features an increased number of detection points and detection systems, with oxygen sensors installed at both the inlet and outlet of the three-way catalytic converter. It fully ensures compliance by monitoring vehicle emissions in real-time, thereby better guaranteeing the enforcement of the Euro III emission standards.
17
3
Share

Can You Still Drive with a Chassis System Malfunction?

It is not advisable to continue driving with a chassis system malfunction. Once a vehicle's chassis develops a fault, the driver must promptly inspect and repair it. Continuing to operate a vehicle with a faulty chassis system compromises safety during driving. Below is additional information about a vehicle's chassis system: 1. Components: The chassis system is another critical part of a vehicle, following the engine. It contains many essential components, such as the transmission system, running gear, steering system, and braking system. Driving a vehicle with a faulty chassis can easily cause these components to fail, leading to unpredictable dangers. 2. Timely Repair: The primary function of the chassis is to support and install the vehicle's engine and its various parts and assemblies, ensuring normal operation. Therefore, any chassis malfunction should be repaired immediately.
11
0
Share

Is the touch-up paint at 4S shops the same as at repair shops?

No, it's not the same. Compared to repair shops, 4S shops have advantages mainly in terms of materials, equipment, and quality assurance. Due to more standardized operating procedures, the touch-up paint effect at 4S shops is indeed slightly better than at most repair shops. Below are the specific details: 1. Different paint materials: Both 4S shops and repair shops use what's called "automotive refinish paint." Whether it's a 4S shop or a repair shop, the paint used cannot actually be called "original factory paint." Only the paint applied when the manufacturer is producing and building the vehicle can be called "original factory paint." From a professional perspective, the paint provided by paint manufacturers to automobile OEMs is called "automotive paint," while the paint provided to 4S shops and repair shops is called "automotive refinish paint." 2. Different touch-up paint equipment: 4S shops have better sanding equipment, which is more efficient. 4S shops mainly use "panel spray dry sanders," while some smaller auto repair shops still use manual wet sanding. Comparing the two, dry sanding is much more efficient, capable of sanding 10 square meters per hour, whereas wet sanding can only sand 4 square meters per hour.
5
2
Share

What are the components of automotive antifreeze?

Automotive antifreeze is primarily composed of ethylene glycol. Currently, over 95% of antifreeze used domestically and internationally is water-based ethylene glycol antifreeze. Compared to tap water, ethylene glycol is notably characterized by its antifreeze properties, whereas water cannot prevent freezing. Additionally, ethylene glycol has a high boiling point, low volatility, moderate viscosity that changes minimally with temperature, and excellent thermal stability. Antifreeze prevents the coolant from freezing when the vehicle is parked in cold winter conditions, which could otherwise cause the radiator to crack or the engine block to freeze. Many people believe that antifreeze is only necessary in winter, but in fact, antifreeze should be used year-round. Antifreeze is a type of coolant containing special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and protecting against scale and corrosion throughout the year.
9
4
Share

Why is the antifreeze decreasing more and more?

The reasons for the decreasing antifreeze: 1. Damage to the radiator cylinder gasket; 2. Loose connections at the overflow tank, water pump joint surface, and various pipelines of the cooling system; 3. Evaporation under high temperatures. If there is a lack of antifreeze, the primary issue is the loss of effective cooling, which can easily lead to overheating during high-speed operation. Additionally, the viscosity of the engine oil will decrease, leading to wear and tear on engine components over time. The full name of antifreeze should be antifreeze coolant, meaning a coolant with antifreeze properties. It prevents the coolant from freezing and cracking the radiator or damaging the engine cylinder block or head during cold winter parking.
7
1
Share

Does Antifreeze Get Consumed?

Antifreeze does get consumed over time. It is considered a consumable item, and under continuous high temperatures, some degree of evaporation is inevitable. Additionally, antifreeze loss can occur due to leaks. Damaged radiator gaskets, overflow tanks, loose connections at the water pump interface, or other cooling system pipe fittings may lead to antifreeze leakage. In such cases, it is essential to visit the nearest auto repair shop promptly for repairs. Insufficient antifreeze can have varying degrees of negative effects. If the antifreeze level is too low (below the MIN mark), the cooling efficiency will be significantly reduced. This can easily lead to overheating (excessive temperature) during high-speed operation, and the viscosity of the engine oil will also decrease. Over time, this can cause wear and tear on engine components.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.