Under What Circumstances Should Fuel Injectors Be Cleaned?

2 Answers
McKathryn
07/24/25 2:20pm
The following situations require cleaning the fuel injectors: 1. When the fuel injectors are clogged, fuel injection is not smooth. 2. When there is carbon buildup and adhesive deposits in the injector gap, preventing the designed fuel injection volume or atomization effect, the fuel injectors need to be cleaned. Below is some relevant information about fuel injectors: 1. A fuel injector is essentially a normally closed valve. When the electromagnetic coil is energized, it generates suction, lifting the needle valve to open the injection hole. Fuel is sprayed at high speed through the annular gap between the needle valve head and the injection hole, forming a mist that facilitates complete combustion. 2. Generally, fuel injectors need to be cleaned when a car has traveled approximately 30,000 to 50,000 kilometers. However, the condition of the fuel injectors is also related to factors such as the car model and external environment, so this mileage is not always accurate.
Was this review help?
3
0
Share
ReeseFitz
08/11/25 8:09am
When I was repairing my car before, I noticed that the car would shake inexplicably when accelerating, feeling particularly rough. This is when the fuel injectors need cleaning. With excessive carbon buildup, the fuel injectors are prone to clogging, especially in older cars that have been driven tens of thousands of kilometers or after using contaminated gasoline. At idle, the engine makes a lot of noise, and fuel consumption also increases significantly—burning several extra liters per hundred kilometers is not uncommon. Don’t hesitate at this point; clean them promptly to prevent the problem from worsening and damaging the engine. For regular maintenance, I recommend checking every 30,000 kilometers. The cost of cleaning is not high, just a couple hundred yuan. Additionally, leaving the car unused for long periods can cause gasoline to solidify and the fuel injectors to clog. If the exhaust emits a strange odor and an inspection station identifies the issue, timely cleaning of the fuel injectors is necessary to avoid fines for non-compliance. Simply put, any abnormalities should be addressed promptly.
Was this review help?
4
3
Share
Expand All
More Forum Discussions

What is the difference between 0W20 and 0W40?

The differences between 0W20 and 0W40 are as follows: 1. Base viscosity differs: 0W40 oil has a higher viscosity than 0W20 oil, meaning that at the same temperature, 0W40 oil has much poorer fluidity compared to 0W20. 2. High-temperature shear resistance differs: 0W40 oil is superior to 0W20 oil, providing a stronger and thicker oil film. 0W-40 oil offers better high-temperature protection, as higher kinematic viscosity in oil results in better high-temperature shear resistance. The higher the high-temperature shear resistance of the oil, the better the stability of the oil film and the engine protection capability. If the oil film is torn due to insufficient strength during high-speed engine operation, it can lead to wear. Below is relevant content introduction: Oil selection: Since oil significantly affects the performance and lifespan of the engine, it is essential to strictly follow the vehicle's user manual to select oil of the same series, service grade, and viscosity grade.
10
1
Share

How Long Does It Take to Change the Transmission Oil for a Fit?

Under normal circumstances, changing the transmission oil for a Fit takes about half an hour. Below are the methods for changing the transmission oil for a Fit: 1. There are two methods for changing transmission oil: one is gravity replacement, and the other is using a circulation machine. It is recommended to use the circulation machine method because it can clean the transmission, whereas gravity replacement only replaces the oil without cleaning the transmission. 2. The gravity oil replacement method generally involves lifting and securing the vehicle, finding a suitable container to hold the transmission oil, locating the transmission oil pan, and using tools to unscrew the drain plug, allowing the transmission oil to flow out. If adding ATF oil, there is usually a filling port. 3. The circulation machine replacement method uses specialized transmission cleaning equipment. During the operation of the transmission, the old oil is thoroughly circulated and completely drained before adding new transmission oil, achieving a replacement rate of over 90% and ensuring a good oil change effect.
6
1
Share

What is the difference between double wishbone and multi-link suspension?

Here are the differences between double wishbone and multi-link suspension: 1. Different composition: The multi-link independent suspension consists of links, shock absorbers, and damping springs. The double wishbone independent suspension is composed of upper and lower unequal-length V-shaped or A-shaped control arms and a pillar-type hydraulic shock absorber, with the upper control arm usually shorter than the lower one. 2. Different characteristics: The multi-link suspension not only ensures a certain level of comfort but also minimizes body tilt to the greatest extent possible. The double wishbone independent suspension is characterized by high lateral stiffness, excellent anti-roll performance, strong grip, and clear road feedback. 3. Different drawbacks: The disadvantages of the double wishbone independent suspension include high manufacturing costs and complex suspension positioning parameter settings. Additionally, the complexity of maintenance and servicing is high. The drawbacks of the multi-link independent suspension are its relatively complex structure, significantly higher material costs, R&D testing costs, and manufacturing costs compared to other types of suspensions, as well as its large space occupation.
16
4
Share

How Can the Original Owner Recover a Mortgaged Vehicle?

If you want to retrieve the vehicle, you must promptly follow the contract and complete the necessary procedures at the bank, repay the loan in full, and cancel the mortgage to recover the mortgaged vehicle. Below are specific precautions for vehicle inspection when picking up the car: 1. Inspect the Body: Visually examine the car's paint surface for scratches and wear. Check for color differences in the paint under ample sunlight by opening the doors and adjusting them to various angles to inspect the sheet metal for smoothness. 2. Check the Doors: Open the doors to ensure they operate smoothly and that the gaps between the doors and the front and rear bumpers are consistent. 3. Inspect the Engine: Open the engine hood to check for cleanliness inside the engine compartment. If the vehicle has been stored for a long time or used, some areas may show noticeable dust or stains. 4. Check the Glass: Verify whether the windshield is original.
16
5
Share

How to Identify Shock Absorber Spring Failure?

You can determine whether the shock absorber spring is faulty by listening for sounds. Here are specific methods to identify shock absorber spring failure: 1. Listen for sounds: When driving on rough roads, if you hear heavy impact noises from the car—especially as the road becomes more uneven—and these sounds originate from the tire area, it may indicate that the shock absorber is malfunctioning or no longer working properly. 2. Check for oil leaks: Inspect the shock absorber for oil leaks. If the surface is dry and clean, it is normal. However, if you notice oil seeping from the top of the shock absorber, it could mean that the internal hydraulic oil is leaking from the piston rod. Oil leakage indicates that the shock absorber is no longer functioning correctly and requires repair. 3. Observe the body's bounce: When the car is parked on the roadside, press down on one side of the car's tire and quickly release it. If the car bounces up and down with elasticity, the shock absorber is working normally. If the car only moves up and down without bouncing back after several repetitions, it suggests that the shock absorber has failed.
15
4
Share

Should You Connect the Positive or Negative Terminal First When Jump-Starting a Car?

When jump-starting a car, you should first connect the positive terminals of both batteries. Below is additional information on jump-starting: 1. Specific Procedure: First, connect the positive terminals of both batteries, then connect the negative terminals. After the engine starts, disconnect the negative terminal first, followed by the positive terminal. 2. Reason for Connecting the Positive Terminal First: If you connect the negative terminal first and then the positive terminal, connecting the negative terminal will not cause any issues. Similarly, connecting the positive terminal to the first car will not pose a problem. However, when connecting the positive terminal to the second car, if the battery clamp accidentally touches the car body, it can cause a short circuit in the first car. This short circuit may damage various electronic control modules in the car, potentially rendering the battery useless and posing significant danger.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.