Under what circumstances should car fog lights be turned on?

2 Answers
OmarMarie
07/24/25 1:49am
Car fog lights are used in foggy or rainy conditions when visibility is significantly affected by the weather. The prerequisite for turning on the fog lights is to first turn on the vehicle's lights, and then press the fog light button. Fog lights are lighting signals used in rainy or foggy weather. Fog lights are installed at the front and rear of the car to illuminate the road and remind vehicles ahead and behind to maintain a safe distance during rainy or foggy weather driving. The visible range of vehicle headlights is generally only within 30 to 50 meters, while the visible range of fog lights can reach about 100 meters. Fog lights are used during heavy rain when the windshield is covered with water, causing blurred vision and difficulty in seeing the distance from vehicles ahead and behind. In such cases, fog lights can be turned on to alert other vehicles and avoid collisions.
Was this review help?
3
1
Share
StAlexander
08/10/25 9:30pm
The best time to turn on your car's fog lights is during severe weather conditions, such as heavy fog when visibility is obscured by a white haze, and regular headlights tend to reflect, making it harder to see the road. Once, I was driving home at night in thick fog and could barely see a few meters ahead. I promptly turned on the fog lights, which are positioned low and emit a yellow light with strong penetration, helping me clearly identify lane markings and avoid a rear-end collision—it was incredibly practical. They are also useful during heavy rain, especially on highways when sudden downpours drastically reduce visibility. Fog lights make your vehicle more noticeable to others. They are equally effective in snowy conditions or strong smoke environments. Remember, never use fog lights on clear nights—their intense brightness can dazzle oncoming drivers, creating glare hazards. Develop the habit of using fog lights only when the road is slippery or visibility is poor, ensuring both your safety and consideration for others.
Was this review help?
4
0
Share
Expand All
More Forum Discussions

What should be noted when replacing shock absorbers?

Ensure the tool for compressing the shock absorber spring is secure and operate it properly. Below is relevant information about shock absorbers: 1. Shock absorber replacement: If a shock absorber is being replaced due to normal aging and oil leakage, the other shock absorbers are likely also aged. It won't be long before another shock absorber starts leaking after the new one is installed, so it's recommended to replace them in pairs. 2. Shock absorber price: Generally, the cost of replacing shock absorbers varies depending on the vehicle brand's premium capability, as well as the material and technological level of the product. Normally, the price of ordinary shock absorbers ranges from about 500-1000 yuan; while shock absorbers with higher technological content, capable of adjusting damping, may cost between 1000-5000 yuan.
17
1
Share

Where to Charge New Energy Vehicles Daily?

There are several methods for charging new energy vehicles: portable charging, home charging pile charging, and public charging pile charging. The following are the characteristics of new energy vehicles: 1. Hybrid Electric Vehicles: Equipped with batteries that can conveniently recover kinetic energy during downhill driving. In bustling urban areas, the internal combustion engine can be shut down, allowing the battery to drive alone, achieving "zero" emissions. 2. Pure Electric Vehicles: Relatively simple and mature technology, can be charged wherever there is a power supply. 3. Fuel Cell Vehicles: Zero or near-zero emissions, reduce water pollution caused by oil leaks, lower greenhouse gas emissions, and operate smoothly and quietly.
15
0
Share

What are the methods for car dent repair?

Car dent repair refers to restoring the dented parts of a car's paint surface to their original condition. Generally, car dent repair can restore sharp-angle and obtuse-angle dents to their original state. Primarily, dents without paint chipping can be fully repaired, hail dents can be fixed, but edges and AB pillars are difficult to repair. Below is an introduction to different levels of car dents: 1. Minor dents: Surface damage, only the sheet metal is dented, and the paint surface is not damaged. 2. Moderate dents: Damaged vehicle, surface components are affected, but the inner beams and pillars are not damaged. 3. Severe dents: Essentially accident vehicles, with serious deformation of beams and pillars.
10
4
Share

Does Insurance Need to Be Transferred When Transferring Car Ownership?

After transferring car ownership, the insurance also needs to be transferred. Below are the required documents for transferring ownership when purchasing a used car: 1. Seller's Identification Documents: Original and photocopy of the seller's personal ID card. 2. Buyer's Identification Documents: Original and photocopy of the buyer's personal ID card. 3. Vehicle Documents: Original and photocopy of the vehicle's motor vehicle registration certificate. 4. Driving Documents: Original and photocopy of the vehicle's driving license. Below is additional information about the vehicle ownership transfer process: 1. Fill Out the Contract: Obtain the Motor Vehicle Sales Contract at the service window and fill it out. 2. Vehicle Inspection: Drive the vehicle directly to the transfer inspection area for inspection, photography, stamping, and license plate removal. Fill out the inspection record form. 3. Complete Procedures: After all processes are completed, drive the car back to the parking lot, then proceed to the transfer hall to complete the procedures. 4. Pay Fees: Return to the transfer hall, take a number, queue up, and wait for your turn. After the staff confirms the vehicle has no violations, the transfer process begins, and the transfer fee must be paid. 5. Complete Related Procedures: After payment, proceed to the transfer processing window to complete the relevant procedures. 6. Transfer Completed: After completing the transfer process, you can select a new license plate and receive the new plates, driving license, and registration certificate, marking the completion of the transfer.
10
1
Share

How Long Should a Car Be Warmed Up?

Car warm-up time only needs 30 seconds. After starting the car, wait 30 seconds to one minute before driving, but avoid high-speed driving at this time. Maintain low speed and keep the engine speed below 3,000 to 3,500 RPM, ideally around 2,000 RPM. Both summer and winter require warm-up, with winter requiring a longer warm-up time than summer. After sitting overnight, the lubricating oil on the friction surfaces of the engine has mostly dissipated, losing its protective oil film. Low temperatures increase the viscosity of the lubricating oil, reducing its adhesion and fluidity, which increases resistance when starting the engine. Driving under these conditions will place additional load on the engine and cause unnecessary wear.
11
1
Share

How many spark plugs are there in a car?

There is one spark plug per cylinder, so a 3-cylinder car has 3 spark plugs, and a 4-cylinder car has 4 spark plugs. A spark plug mainly consists of a terminal nut, insulator, terminal stud, center electrode, side electrode, and shell. The main types of spark plugs are: standard spark plugs, projected insulator spark plugs, electrode spark plugs, seat spark plugs, pole spark plugs, and surface gap spark plugs. Steps to replace spark plugs: Open the hood, lift the engine's plastic cover, remove the high-voltage wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one, checking for any external debris like leaves or dust and cleaning them thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage wires in the firing order and secure the cover.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.