Under what circumstances is overtaking not allowed during driving?

2 Answers
SanCourtney
08/30/25 4:02am
During driving, the following situations prohibit overtaking: 1. The vehicle ahead is making a left turn, U-turn, or overtaking another vehicle. 2. There is a possibility of meeting an oncoming vehicle. 3. The vehicle ahead is a police car, fire truck, ambulance, or engineering rescue vehicle performing emergency duties. Motor vehicles must adhere to the following regulations when overtaking: 1. Activate the left turn signal in advance, switch between high and low beams, or sound the horn. 2. On roads without a central dividing line or with only one motor vehicle lane in the same direction, when the vehicle ahead receives an overtaking signal from the vehicle behind, it should reduce speed and move to the right to give way if conditions permit. 3. When the vehicle ahead is overtaking, the vehicle behind should ensure there is sufficient safe distance before overtaking from the left side of the vehicle ahead. After maintaining a necessary safe distance from the overtaken vehicle, activate the right turn signal and return to the original lane. 4. Overtaking is not allowed when there is a possibility of meeting an oncoming vehicle, when the vehicle ahead is making a left turn, U-turn, or overtaking, when the vehicle ahead is a police car, fire truck, ambulance, or engineering rescue vehicle performing emergency duties, or when passing through railway crossings, intersections, narrow bridges, curves, steep slopes, tunnels, pedestrian crossings, or sections with heavy urban traffic where overtaking conditions are not met. 5. Overtaking is not allowed on highway ramps, acceleration lanes, or deceleration lanes.
Was this review help?
11
0
Share
DelTalia
09/11/25 8:04am
I've been driving for over thirty years and have seen too many accidents caused by improper overtaking. Never overtake on curves or hilltops because your view is blocked—you might not see oncoming traffic. Like last year on a mountain highway, at a sharp curve, a driver tried to overtake and ended up colliding head-on with a truck, resulting in severe damage and injuries. Areas near intersections are also no-go zones, as pedestrians or cyclists might be present, and accelerating there could easily lead to a collision. Additionally, in poor weather conditions like rain or fog, visibility is too low, and judging distances becomes unreliable—overtaking in such situations is literally risking your life. I only overtake on straight roads with clear visibility ahead, ensuring safety while saving time without taking unnecessary risks.
Was this review help?
13
0
Share
Expand All
More Forum Discussions

What is the emission standard of the Geely Vision X3?

The emission standard of the Geely Vision X3 is China VI. The engine of the Geely Vision features naturally aspirated intake and DVVT variable valve timing with dual overhead camshafts, combined with multi-point fuel injection, enabling the engine to meet the China VI emission standard. Below are the implementation years of the emission standards: 1. China I standard, implemented nationwide on July 1, 2001, primarily targeting restrictions on carbon monoxide, hydrocarbons, and particulate emissions. 2. China II standard, implemented nationwide on July 1, 2004, requiring a 30% reduction in carbon monoxide and a 55% reduction in hydrocarbons and carbon oxides. 3. China III standard, implemented nationwide on July 1, 2007, requiring a 40% reduction in total pollutant emissions compared to China II. 4. China IV standard, implemented nationwide on July 1, 2010, requiring a 50% to 60% reduction compared to China III. 5. China V standard, implemented nationwide on January 1, 2018, requiring a 25% reduction in nitrogen oxide emissions compared to China IV. 6. China VI standard, with China VIa implemented nationwide on July 1, 2020, and China VIb implemented nationwide on July 1, 2023.
5
4
Share

How to Adjust the Clock in a Honda Fit?

The method to adjust the time in a Honda Fit is as follows: 1. Start the car; 2. Press the clock button; 3. After hearing a beep, the time will start flashing; 4. Press the hour and minute buttons; 5. After setting the correct time, press the clock button to confirm. Below is a brief introduction to the Honda Fit: 1. The Fit is a compact car with dimensions of 4109mm in length, 1694mm in width, and 1537mm in height, and a wheelbase of 2530mm. 2. In terms of suspension, the Fit features a MacPherson strut front suspension and a torsion beam rear suspension. 3. For power, the Fit is equipped with a 1.5-liter naturally aspirated engine, delivering a maximum horsepower of 131, a maximum power of 96 kW, and a maximum torque of 155 Nm, paired with a continuously variable transmission (CVT).
16
5
Share

Do I Need to Memorize the Route Map for Subject Three?

You need to memorize the route map for Subject Three. Here are the details to pay attention to during the Subject Three test: 1. Release the clutch and press the accelerator: During Subject Two, many students get used to controlling speed by pressing the clutch, making them reluctant to release it. However, in Subject Three, you must not keep pressing the clutch—it should only be used when shifting gears. Pressing the accelerator is a frequent operation in Subject Three. 2. Observe, listen, and remember: During the Subject Three test, you must learn to observe the road conditions, listen to the computer's voice prompts, and remember your mistakes to avoid repeating them. 3. Master the lighting simulation test: Familiarize yourself with all the voice prompts for the lighting simulation test and be able to respond quickly during the exam to make timely judgments and operations. 4. Keep the turn signal on for at least 3 seconds: When changing lanes, you must activate the turn signal in advance and keep it on for at least 3 seconds; otherwise, you will fail immediately. 5. Match the gear with the speed: The new driving test regulations specify the speed ranges for each gear. When practicing gear shifts, ensure you match the speed to the corresponding gear before shifting. 6. Control the clutch and brake: Clutch control mainly involves the semi-engagement technique, while brake control refers to gently tapping the brake.
11
4
Share

How Fast Can You Complete Subject Two to Subject Four?

Subject Two to Subject Four can be completed in a minimum of 40 days. Below are some driving test techniques: 1. Preventing 'Nodding' Braking Technique: When the braking distance is sufficient, press the brake pedal slowly and continuously to allow the car to decelerate evenly. As the car is about to stop, gradually release the brake pedal until it is completely lifted when the car comes to a full stop. The initial braking force is determined by the braking distance—the shorter the distance, the greater the initial braking force. 2. Following Distance Anti-Rear-End Braking Technique: When following another car, the main purpose of braking is to maintain a safe distance from the car in front, meaning you should adjust your speed to match the car ahead. The key technique here is to press the brake pedal gently, maintain braking force, and then increase or decrease the force based on the speed of the car in front. 3. Hill Braking Technique: Braking on an uphill slope is similar to braking on flat ground, but due to the deceleration effect caused by the car's weight, the braking force required is slightly less. When braking uphill, press the brake pedal gently, even more gently than on flat ground, but release it faster to prevent excessive speed loss. For manual transmission cars, a rapid speed drop can easily lead to inappropriate gear selection, and too low a gear may cause the car to shake. Therefore, after braking uphill, pay attention to shifting gears promptly. 4. Curve Braking Technique: When approaching a curve, brake before entering the curve, decelerate slowly while entering, and then accelerate out of the curve. While braking on a curve, steer the wheel and adjust the car's posture according to the curve's arc. Avoid slamming the brakes, especially for vehicles in the outer lane, to prevent loss of control. 5. Emergency Braking Technique: In emergency situations, do not worry about whether the car 'nods.' Focus on stopping or safely avoiding obstacles in the shortest time and distance possible.
8
4
Share

What are the procedures for annual vehicle inspection?

The annual vehicle inspection process includes exhaust emission testing, violation check, deposit payment, appearance inspection, online detection, final review, fee payment, and label collection. Relevant information about annual inspection is as follows: 1. Purpose: Vehicle annual inspection refers to a mandatory test for every vehicle that has obtained an official license plate and registration certificate, equivalent to an annual physical examination for vehicles according to the technical conditions for safe operation of motor vehicles. It helps to promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents. 2. Non-compliance situations: Vehicles that fail the annual inspection should be repaired within a specified time limit. If they still fail after the deadline, the vehicle management office should confiscate their registration certificate and prohibit them from continuing to drive. Vehicles that do not participate in the annual inspection without reason or fail the inspection are not allowed to drive on the road or transfer ownership.
1
0
Share

Is It Normal for Water to Accumulate in a Car's Exhaust Pipe?

Water accumulation in a car's exhaust pipe is a normal phenomenon. Here are measures to address water accumulation in a car's exhaust pipe: 1. Measure One: Replace the exhaust pipe. Some car models have design flaws, with improperly positioned drainage points on the exhaust pipe. 2. Measure Two: Drill a hole in the exhaust pipe. Drill a hole at the lowest point of the exhaust tail section's lower wall to allow water to drain out. 3. Measure Three: Drive the car onto a slope with the rear facing downward, then rev the engine to expel the water. 4. Measure Four: If you hear gurgling water sounds in the exhaust during idle, you can also park on level ground and rapidly accelerate several times to expel the water. 5. Measure Five: If you notice vehicle resonance, it might be caused by damaged exhaust pipe mounting hangers. Replace them if necessary.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.