Under what circumstances do tires need to be replaced?

1 Answers
CarmenMarie
07/30/25 9:22am
Tires need to be replaced under the following circumstances: 1. The tire shows cracks; 2. The tire has been patched more than three times; 3. The sidewall of the tire is severely scratched; 4. The tire shoulder or sidewall is severely worn; 5. The tread is deformed or the rim is damaged; 6. Severe aging and peeling; 7. The tread pattern is below the wear mark; 8. The tire has bulges. Precautions for tire replacement: 1. Pay attention to cleaning the rim; 2. Do not use gasoline, engine oil, or kerosene for lubrication; 3. Do not forget to check the valve core, valve base, and rim flange; 4. Do not forget to install the valve cap; 5. When replacing the tire, go to a safe place; 6. Pay attention to putting the vehicle in P gear, turning off the engine, and moving to a flat road surface; 7. Pay attention to placing a triangular warning sign behind the vehicle, placed 50 meters behind the car.
Was this review help?
11
1
Share
More Forum Discussions

How to Verify the Authenticity of 4S Store Parts?

You can check whether the part number is original by searching for the part code online. Here is an introduction about 4S stores: 1. Introduction: A 4S store, fully known as Automobile Sales Service Shop 4S (Automobile-Sales-Servicshop4S). 2. Overview: It is a sales store that integrates automobile sales, maintenance, parts, and information services. It entered China from Europe after 1998. 3. Development: 4S stores are invested and built by dealers according to the standards specified by automobile manufacturers. The design inside and outside the store is unified, with huge investments, often amounting to tens of millions. They are luxurious, grand, and comfortable, and can only sell single-brand cars specially authorized by the manufacturer.
2
4
Share

Does the Wuling Hongguang MINI support fast charging?

Currently, the Wuling Hongguang MINI only supports slow charging and does not support fast charging. The charging modes are divided into the following two types: 1. Traditional charging piles. 2. Household 220V power supply. Below is some extended information about the Wuling Hongguang MINI: The Wuling Hongguang MINI is a three-door, four-seater micro electric hatchback, belonging to the single-motor model category. It is equipped with a lithium iron phosphate battery and features a rear-mounted engine and rear-wheel drive. The motor has a maximum power of 20kW and a maximum torque of 85Nm. The vehicle dimensions are 2917/1493/1621mm, with a compact body that offers flexible driving. It can easily navigate through narrow alleys or congested urban roads, making travel more relaxed and efficient, and eliminating the hassle of 'difficult parking'.
15
1
Share

Does the Wuling Hongguang Mini support fast charging?

Currently, none of the Wuling Hongguang Mini product lineup supports fast charging. The charging time for the Wuling Hongguang Mini's Relaxed and Free models is 6.5 hours, while the Enjoy model takes 9 hours to charge, as this configuration features a higher battery capacity. Introduction to the Wuling Hongguang Mini: Configuration: The Wuling Hongguang Mini's electric motor has a maximum power of 20 kW and a maximum torque of 85 Nm. The entire lineup uses lithium-ion batteries, which are stronger and have higher energy density. The front suspension of the Wuling Hongguang Mini uses a MacPherson independent suspension, while the rear suspension employs a multi-link non-independent suspension. Dimensions: The Wuling Hongguang Mini has a wheelbase of 1940 mm, with a length, width, and height of 2917 mm, 1493 mm, and 1621 mm, respectively. This is a 3-door, 4-seater car, with a curb weight of around 700 kg. Methods for charging electric vehicles: Using a three-pin socket and charging cable for charging; using an AC charging pile to charge the electric vehicle directly on a higher-current AC grid, with a charging time of about 4 hours; using a DC charging pile for fast charging, which significantly reduces charging time.
7
1
Share

What is the appropriate tire pressure for a scooter?

Scooter front tire pressure should be maintained at 2.0 bar, and the rear tire pressure should be maintained at 2.5 bar. Methods for insufficient tire pressure: If no damage is visible, you can directly inflate the tire to the normal pressure and reset the tire pressure system; If inspection reveals a puncture, promptly drive to a tire shop for repair and then reinflate; If the tire pressure warning reappears after inflation without any puncture, it may be due to air leakage caused by a deformed wheel rim. It is recommended to inspect the wheel rim and replace it if necessary. Hazards of excessive tire pressure: Reduced tire friction and adhesion, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates wear on the central tread pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Overstretches tire cords, reducing elasticity and increasing the load on the vehicle during driving; Decreases puncture resistance. When encountering sharp objects like nails or glass, the tire is more prone to punctures, leading to internal cracks, blowouts, or even tire bursts.
4
4
Share

How to Handle Air Leakage in Brake Caliper in Emergency?

Disconnect the brake pipe joint of the brake caliper. Find a thinner plastic bag, tear off a piece and roll it into a ball, then insert it into the air source input port of the brake caliper. Reinstall the brake pipe back to the brake caliper as it was. Below is some relevant information about brake calipers: 1. Classification: Automotive brakes are divided into air brakes and hydraulic oil brakes. Air brakes consist of an air compressor (commonly known as an air pump), at least two air reservoirs, one brake master cylinder, one quick-release valve for the front wheels, and one relay valve for the rear wheels. Hydraulic brakes are composed of a brake master cylinder (hydraulic brake pump) and a brake fluid reservoir. 2. Principle: When the brake is pressed, the oil outlet opens and the oil inlet closes. Under the pressure of the pump piston, the brake fluid is squeezed out of the pipe and flows to each brake caliper to perform the braking function. When the brake pedal is released, the oil outlet in the brake master cylinder closes and the oil inlet opens, allowing the brake fluid to flow back from each brake caliper to the brake master cylinder, returning to the original state.
20
4
Share

Are Cars with Sunroofs Good?

Cars with sunroofs are good. Here are the advantages of cars with sunroofs: 1. If a car is parked in a fixed position for a long time, the air inside the car will definitely be very poor. If the sunroof on the car roof is opened while driving, the stale air inside the car will be expelled, achieving the purpose of air exchange between the inside and outside of the car. Moreover, the heat inside the car will naturally be expelled, allowing the car to cool down quickly and avoiding the use of air conditioning, indirectly saving some gasoline. 2. When the temperature difference between the inside and outside of the car is particularly large, fog can easily form on the car windows. Sometimes, even using the wiper spray to clean the windows cannot effectively remove the fog. However, wiping the car windows with a cloth can affect driving safety. At this time, opening the sunroof on the car roof is a great choice, as the fog can gradually be eliminated.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.