Under what circumstances can a motorcycle be replaced after a collision?

1 Answers
LeHazel
07/29/25 10:22pm
Motorcycles that are totaled in a collision can be replaced through insurance claims. A specific assessment from a repair shop is required. Main insurance types for motorcycles: To insure a motorcycle, the primary policies to consider are compulsory traffic insurance and commercial insurance. More specifically, these include compulsory traffic insurance, motorcycle damage insurance, third-party liability insurance, theft insurance, passenger liability insurance, spontaneous combustion insurance, scratch insurance, etc. Motorcycle compulsory traffic insurance: Compulsory traffic insurance refers to coverage where, in the event of a road traffic accident caused by the insured motorcycle resulting in personal injury, death, or property loss to victims (excluding the vehicle's occupants and the insured), the insurance company provides compensation within the liability limits.
Was this review help?
2
0
Share
More Forum Discussions

What is the fuel consumption of the hs5?

hs5 fuel consumption is 8.5 liters per 100 kilometers. Automobile fuel consumption: Generally, cars should be economical family models, with 1.0, 1.3, 1.6, and 2.0 cars consuming approximately 5L, 7L, 10L, and 12L per 100 kilometers, respectively. Fuel consumption is a complex factor, depending on the vehicle's performance, road conditions, and the driver's skills. Automobile fuel consumption precautions: Plan your route before driving, check traffic conditions, and try to avoid roads prone to congestion. Maintain a steady speed while driving, avoid carrying unnecessary items, and reduce the vehicle's weight.
18
3
Share

What is the fuel consumption of the Camry?

The fuel consumption of the Camry is 5.8 liters per 100 kilometers. Automobile fuel consumption: Generally, cars should be economical family vehicles. The fuel consumption for 1.0, 1.3, 1.6, and 2.0-liter cars per 100 kilometers is approximately 5L, 7L, 10L, and 12L, respectively. However, fuel consumption is a complex factor and also depends on the vehicle's performance, road conditions, and the driver's skills. Fuel consumption considerations: Plan your route before driving, check traffic conditions, and try to avoid roads prone to congestion. Maintain a steady speed while driving, avoid carrying unnecessary items in the car, and reduce the vehicle's weight.
1
4
Share

How to Turn on the Air Conditioning for Cooling in a Sedan?

Methods for turning on the air conditioning for cooling in a sedan vary depending on the situation: 1. Manual air conditioning: Turn on the air conditioning switch, press the AC button, and rotate the temperature control to the blue position; 2. Automatic air conditioning: Simply press the AUTO and AC buttons to light them up. The functions of the air conditioning are: 1. To cool, heat, ventilate, and purify the air inside the car; 2. To provide a comfortable environment for passengers, reduce driver fatigue, and improve driving safety. Maintenance methods for the air conditioning: 1. Clean the air vents promptly; 2. Maintain the air conditioning condenser in a timely manner; 3. Clean or replace the air conditioning filter element promptly.
19
4
Share

How to switch to manual mode in the Verano?

The method to switch to manual mode in the Verano is: First shift to L gear, then press the +/- buttons on the left side of the gear lever to increase or decrease the available gear range. Taking the 2020 Verano as an example, it belongs to the compact car category with body dimensions of: length 4723mm, width 1802mm, height 1466mm, wheelbase 2700mm, and fuel tank capacity of 52L. The 2020 Verano features a front MacPherson strut independent suspension and a rear torsion beam with Watt's linkage semi-independent suspension. It is equipped with a 1.0L turbocharged engine producing maximum power of 125PS (92kW) and peak torque of 180Nm, mated to a 6-speed automatic transmission with manual shift mode.
6
3
Share

Can You Drive If the Car Alternator Belt Breaks?

You can drive if the car alternator belt breaks. The function of the alternator is: when the engine is running normally, it supplies power to all electrical equipment except the starter motor and simultaneously charges the battery. The maintenance methods for the car alternator are: 1. Clean accumulated dirt and dust from the alternator surface; 2. Check and adjust the tension of the drive belt; 3. Check whether the wiring between the alternator and the regulator is securely connected. The steps for replacing the car alternator are: 1. Disconnect the battery cable; 2. Locate the alternator; 3. Unscrew the bolts and loosen the belt that secures the alternator; 4. Remove the alternator, unplug and take out all nuts connecting the electrical components; 5. Install the new alternator by reversing the process.
13
2
Share

How long should the break-in period be for a newly purchased car?

For a newly purchased car, the break-in period typically requires driving approximately 5,000 kilometers. The methods for using a car during the break-in period are as follows: 1. Preheating the cold engine is essential, as proper warm-up allows the oil to lubricate the engine internals effectively, reducing wear; 2. Timely gear shifting is crucial while driving, especially for manual transmission cars. During the break-in period, it's necessary to change gears appropriately to avoid situations like high gear with low RPM or low gear with high RPM; 3. New cars require timely maintenance during the break-in phase. Drivers need to familiarize themselves with the car's braking, throttle, suspension, steering response, and gear-shifting logic to better understand the vehicle's performance.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.