Transmission Issue with 2013 Ford EcoSport?

What are the three main components of a crankshaft connecting rod mechanism?

The crankshaft connecting rod mechanism consists of the following components: 1. Engine block group: cylinder block, cylinder gasket, cylinder head, crankcase, cylinder liner, and oil pan; 2. Piston connecting rod group: piston, piston ring, piston pin, connecting rod; 3. Crankshaft flywheel group: crankshaft, flywheel, torsional vibration damper, balance shaft. Extended content: The crankshaft connecting rod mechanism is the main moving mechanism of the engine. Its function is to convert the reciprocating motion of the piston into the rotational motion of the crankshaft, while converting the force acting on the piston into the torque output by the crankshaft to drive the rotation of the car wheels. The crankshaft connecting rod mechanism is composed of components such as the piston group, connecting rod group, crankshaft, and flywheel group.

1

5

Share

Where is the engine of Yufeng S16 produced?

The engine of Yufeng S16 is produced by Kunming Yunnei Power Co., Ltd. (referred to as Yunnei Power) in China. The following is an introduction to Yunnei Power: 1. Kunming Yunnei Power Co., Ltd., referred to as Yunnei Power, is affiliated with the State-owned Assets Supervision and Administration Commission of Kunming City. It is the first state-controlled listed company in China's multi-cylinder small-bore diesel engine industry, classified as a large-scale national enterprise and one of the 520 key enterprises supported by the state, with development and production capabilities ranking among the top in the industry. 2. The company was established in 1999, initiated by Yunnan Internal Combustion Engine Factory as the sole promoter, and is a listed company established through public offering. It has a history of more than 50 years in the development and production of diesel engines.

19

4

Share

Is Pre-check Necessary for One-button Start?

One-button start does not require pre-check. Here are the relevant introductions about one-button start: 1. The self-check is real-time. If there is a fault, the fault light will illuminate during driving. The reason for having this gear is more focused on the opening and closing of the vehicle's subsequent maintenance circuit. In most cases, it is not possible or necessary to start the engine for maintenance. 2. The start gear is for vehicle startup. One-button start integrates the gear switch, leaving only the ON gear and the start gear. This is also to save the time of starting the vehicle. 3. The self-check is when the key is in the ON gear. It is to ensure the system pressure by operating the fuel pump, and turning on the power of various electrical appliances can prevent damage caused by the high current and high load during direct startup.

10

1

Share

Where is the Volkswagen Bora produced?

The FAW-Volkswagen Bora is produced in Changchun City, Jilin Province. Exterior features of the new Bora: The new Bora retains the natural, smooth, and robust sporty style of the previous model while incorporating Volkswagen's latest design philosophy and Chinese cultural elements, giving it a more dynamic appearance. Compared to the old Bora, the new Bora has slightly increased its length and width while maintaining the same wheelbase of 2513mm. The dimensions of the old Bora were 4376mm in length, 1735mm in width, and 1446mm in height, whereas the new Bora measures 4383mm in length, 1742mm in width, and 1446mm in height, with both length and width increased by 7mm. The new Bora features Volkswagen's latest signature V-shaped front grille, with the VW emblem shared with the Sagitar placed in the center of a three-dimensional chrome radiator grille. Drawing design elements from the Phaeton, the crystal diamond fish-eye headlights are arranged in a double-ring configuration, with the VW logo embedded in the three-dimensional corner headlights that extend to the sides of the car, increasing brightness by 15%-20%. Performance of the new Bora: The body strength and precision of the new Bora have reached international advanced levels, with uniform and tight body gaps approaching 0mm. This level of craftsmanship is typically seen only in high-end models like Mercedes-Benz and BMW. The new manufacturing techniques also enhance the overall aesthetic appeal and significantly improve safety. The new Bora is equipped with an SMFi engine, which stands for Sequential Multi-point Fuel Injection Urban Engine. This engine is also used in several other Volkswagen models and is a representative of Volkswagen's mature and efficient engine technology.

16

3

Share

How to Thoroughly Clean a Car Radiator?

The steps to thoroughly clean a car radiator are: 1. Park the vehicle and turn off the engine. After the coolant temperature drops, open the expansion tank and add radiator cleaner; 2. Start the engine and let it idle for 5 to 10 minutes after the cooling fan operates; 3. Turn off the engine and remove the front bumper of the vehicle; 4. Ensure the coolant has completely cooled, then drain the radiator cleaner along with the coolant, and finally replace it with new engine coolant. The car radiator, also known as the heat exchanger, is a key component in the vehicle's cooling system. Its function is to dissipate heat. The coolant absorbs heat in the water jacket, flows to the radiator to release the heat, then returns to the water jacket in a continuous cycle.

11

5

Share

Has the Scirocco Been Discontinued?

Volkswagen Scirocco has officially ceased production overseas and is no longer accepting orders. Here is the relevant information: 1. Volkswagen Scirocco has officially ceased production overseas and is no longer accepting orders. This car has always been considered the most distinctive Volkswagen model. The reason for its discontinuation may be due to the potential release of an enhanced version, and adjustments are needed for this model due to its relatively high price. 2. Although the first two generations of the Scirocco shared the same platform with the Golf, its positioning and body size were above the Golf, and their consumer groups did not overlap much. However, after a 16-year hiatus, when the third generation was revived in 2008, it ended up becoming an unpopular accessory. Volkswagen originally hoped that its stylish appearance would attract North American consumers, but it unexpectedly became one of the "rarest" models in the U.S., with visibility even lower than Ferrari and Lamborghini.

12

2

Share

Transmission Issue with 2013 Ford EcoSport?

What are the three main components of a crankshaft connecting rod mechanism?

Where is the engine of Yufeng S16 produced?

Is Pre-check Necessary for One-button Start?

Where is the Volkswagen Bora produced?

How to Thoroughly Clean a Car Radiator?

Has the Scirocco Been Discontinued?

How to Reset the Tire Pressure Light on a Cayenne?

What is the P0135 fault code?

Does the new BMW 5 Series have door drainage holes?

What Happens If You Don't Change Engine Oil?