To which level should the coolant be added in the Nissan Sylphy?

3 Answers
BrynleeDella
07/24/25 5:49pm
The coolant filler port of the Nissan Sylphy is located at the white reservoir containing blue coolant. The coolant reservoir is marked with "MAX" and "MIN" indicators on its body, and the coolant should be filled up to the "MAX" level. More details about the Sylphy are as follows: 1. Overview: It is one of the most typical mainstream family sedans in the Chinese market (alongside models like the Skoda Octavia PRO, Volkswagen Sagitar, Volkswagen Lavida, Toyota Corolla, and Volkswagen Bora). Its fuel consumption ranges from 4.9 to 6.1L/100km, and it has a displacement of 1.6L. 2. Other features: It is equipped with a 1.6L naturally aspirated engine that complies with the China VI emission standards, delivering a maximum power of 99kW (135 horsepower) and a peak torque of 159Nm. The transmission system is paired with a CVT gearbox. It also features the new Nissan-Connect super-intelligent system and an external 8-inch HD capacitive touchscreen.
Was this review help?
10
3
Share
McAndrew
08/10/25 8:18am
As an experienced driver, I always remind my friends that when adding coolant to the Nissan Sylphy, they must locate the translucent expansion tank in the engine bay, usually near the radiator. The tank has clear high and low water level marks labeled MAX and MIN. Before adding, make sure the engine is completely cooled—never risk adding coolant to a hot engine, as the hot water can spray out and cause burns. I always open the tank cap when the engine is cold and slowly pour in Nissan's genuine blue coolant or other compatible antifreeze, filling it just below the MAX line—don't fill it to the brim, leaving some room for expansion. Don't mix different colors of coolant, as this can cause clumping and block the system. I also recommend checking the coolant level regularly because low levels can lead to engine overheating and damage. A quick check every six months is ideal—it saves fuel and protects your car. Remember to wear gloves when handling coolant—safety first. A little prevention can save you from costly repairs.
Was this review help?
9
5
Share
Expand All
DelVivian
09/26/25 2:37am
As a car enthusiast, I know the maintenance of the Nissan Sylphy inside out, and adding coolant to the expansion tank is crucial. The tank is located in a prominent spot under the hood. Locate the MAX and MIN level marks, and only add coolant when the engine is cold for safety. Slowly pour in the correct type of coolant, like the blue one recommended by Nissan, keeping the level within the MAX line—overfilling can cause excessive pressure and damage the hoses. Coolant isn’t just for antifreeze; it also prevents rust and boiling. Proper addition extends the system’s lifespan. I enjoy DIYing this task, using a funnel to avoid spills while checking hoses for cracks or leaks. Replacing the coolant entirely every year or two is more reliable, preventing sediment buildup and keeping the car running efficiently. Small habits bring big value.
Was this review help?
15
3
Share
Expand All
More Forum Discussions

What to do if the ETC device falls off by itself?

ETC tags have an anti-removal feature. Once they become loose or fall off, you need to go to the original issuing point or the provincial expressway ETC service center to reactivate and reinstall them. If the ETC device falls off, you can use the manual lane for toll payment, so there's no need to worry about this. Be sure to keep the ETC card and transmitter device waterproof, avoid demagnetization, prevent violent damage, and prohibit disassembly by non-professionals.
19
2
Share

Where is the car radiator filler port located?

Car radiator filler port is generally located on the right side of the engine compartment. The radiator is usually positioned behind the air conditioning condenser. When opening the engine compartment, only the radiator's upper cover is visible. To clearly see the radiator's position, the front bumper cover needs to be removed. The liquid added to the radiator is antifreeze. Before adding water, it's necessary to cool down and reduce pressure: If the water temperature becomes too high or the radiator's water level is insufficient, immediately stop the car. Let the engine idle and use the fan for heat dissipation. Do not turn off the engine to prevent cylinder sticking. After the water temperature has decreased somewhat, open the radiator's drain switch to let some hot water and steam escape, reducing the steam pressure in the cooling system. This prevents hot air from spraying out and causing injury when opening the radiator cap. Additionally, cooling down avoids sudden addition of cooling water to a hot engine, which could crack the cylinder head. Be cautious when opening the radiator cap: Stand on the upwind side of the radiator. Wrap the cap with a wet cloth, tilt your head and body to one side, and open it slowly. Add water slowly: Since the water jacket and radiator are at high temperatures when the engine is hot, adding water too quickly can cause the cooling water to evaporate and vaporize rapidly, creating vapor lock. This suddenly increases the steam pressure in the system, leading to a secondary water spray accident. Therefore, when adding water, use a thin stream to add slowly. Only after no large amount of hot air is escaping from the radiator port should you gradually increase the filling speed.
6
1
Share

How to Prevent Rear-End Collisions on Highways?

Human factors such as speeding, fatigued driving, drunk driving, failure to maintain a safe distance, illegal lane changes, overloaded trucks, overcapacity buses, and improper braking. Rearview mirrors allow you to observe whether there are vehicles behind you and roughly estimate the distance from the following vehicle. When driving at high speeds, the minimum distance between vehicles should be kept above 50 meters. Using lights can effectively reduce the risk of being rear-ended by alerting drivers and speeding up their reaction time. Use lights to warn drivers in front and behind.
11
3
Share

Can a car be licensed in a different location?

Cars can be licensed in a different location, but a temporary residence permit is required. With the temporary residence permit, ID card, car purchase invoice, tax payment certificate, vehicle qualification certificate, and other procedures, you can go to the local vehicle management office to complete the licensing process. Process and precautions for purchasing and licensing a car in a different location: Ensure complete vehicle procedures: After purchasing a car in a different location, you need to ensure that the materials provided by the 4S store are complete, such as the car invoice, vehicle qualification certificate, maintenance manual, etc. These items are essential. If the 4S store fails to provide any of them, it will affect the subsequent licensing and maintenance of the new car. Prepare a temporary license plate: Next, you need to prepare a temporary license plate, which can be obtained from the car dealer or purchased separately. However, be sure to pay attention to the validity period of the temporary license plate. Using an expired temporary license plate may result in the insurance company refusing to cover claims after an accident. Before departure, contact the local insurance company agent in advance and provide the vehicle's chassis number. Drive the car back to the licensing location for licensing: The car owner needs to go to the local State Taxation Bureau to pay the vehicle purchase tax, and then they can proceed to the vehicle management office to license the new car. According to China's regulations on new car licensing procedures, as long as the vehicle has the four basic procedures—a formal invoice, qualification certificate, purchase tax, and compulsory traffic insurance—it can be licensed.
15
0
Share

What to Do When White Paint Gets on the Protective Plate?

Paint thinner can be used to dilute the paint, which works very well, but banana oil is toxic, volatile, and corrosive, so extra caution is needed when using it. Gasoline can also dissolve paint with good results and without much corrosiveness. Asphalt cleaner can dissolve paint. Spray it evenly on the paint, wait for a while until the paint softens and dissolves, and then rinse it off with clean water.
20
5
Share

What is the reason why the Lavida radar makes a long beep and then stops responding?

It may be due to sensor malfunction or poor internal contact. Definition of reversing radar: Reversing radar, also known as "reverse anti-collision radar" or "parking assist device". Components of reversing radar: Mainly consists of ultrasonic sensors, controller and display unit. Function of reversing radar: The reversing radar is a safety assistance device when parking or reversing a car. It can inform the driver of surrounding obstacles through sound or more intuitive display, eliminating the trouble caused by the driver's need to look around when parking, reversing and starting the vehicle, and helping the driver eliminate blind spots and blurred vision defects.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.