To what level should motorcycle oil be filled?

What are the differences between the Buick GL8 652T and 653T?

The differences between the Buick GL8 652T and 653T models are as follows: different systems - the 652T model is equipped with the second-generation connectivity system, while the 653T model has the third-generation connectivity system; different body dimensions; different suspensions; different fuel tank capacities; and significant differences in interior assembly. Overall, the 653T outperforms the 652T. The latest 653T Comfort model: body dimensions are 5219mm*1878mm*1805mm, fuel tank capacity is 70L, front suspension uses MacPherson independent suspension, rear suspension uses multi-link independent suspension. The interior is equipped with front and rear head airbags, second-row seatbelt reminder, cruise control system, electric sunroof, and a 12.3-inch LCD instrument panel. The latest 652T Comfort model: body dimensions are 5238mm*1878mm*1776mm, fuel tank capacity is 66L, front suspension uses MacPherson independent suspension, rear suspension uses torsion beam non-independent suspension, and comes with a 10-inch LCD instrument panel. Multi-link independent suspension: not only ensures a certain level of comfort but also, due to the numerous links, keeps the wheels and ground as vertical as possible, minimizing body tilt to the greatest extent and maintaining maximum tire contact with the ground. Torsion beam non-independent suspension: vehicles with this suspension system generally have moderate stability and comfort. However, due to its simpler construction and high load capacity, this suspension is mostly used in trucks, ordinary buses, small cars, and some other special vehicles.

19

2

Share

Does the 2021 Bora have front and rear anti-collision beams?

2021 Bora has front and rear anti-collision beams. The following is an extended introduction: 1. The role of anti-collision beams: The main function of anti-collision beams is to transmit the impact force to the more solid chassis longitudinal beams, which can avoid excessive damage in low-speed collisions and disperse the impact force to protect the occupants in high-speed collisions. 2. The front anti-collision beam of Bora: The front anti-collision beam of Bora is equipped with pedestrian protection foam, and there is also a guardrail below to prevent pedestrians from being dragged under the car, which is quite comprehensive in terms of pedestrian protection. The anti-collision beam is designed to be detachable, and the energy absorption box has complete collapse induction and perforation. The distance between the anti-collision beam and the rear cooling net is relatively large, allowing sufficient deformation and energy absorption to protect the rear cooling net and radiator from damage in low-speed collisions. 3. The rear anti-collision beam of Bora: The rear anti-collision beam is a single-layer stamped structure, and the energy absorption box also has complete collapse induction and perforation. However, there is no foam filling inside the rear anti-collision beam or the bumper.

8

3

Share

What should be paid attention to when driving in snowy weather?

When driving in snowy weather, the following precautions should be taken: 1. Maintain a low and steady speed while driving, and avoid changing lanes or overtaking randomly. 2. When driving through sharp curves or slippery roads that are prone to skidding, strictly control the speed to prevent the vehicle from skidding. Do not make sudden turns or apply emergency brakes. 3. Do not coast in neutral when going downhill, and pay attention to controlling the speed when going uphill. Avoid stepping on the accelerator abruptly or charging up the slope at high speed. In case of emergencies, brake in time and avoid turning the steering wheel sharply. 4. When starting on icy or snowy roads, accelerate gently and release the clutch slowly. Maintain a safe speed and distance during driving, and try to follow the tracks left by other vehicles. Do not attempt to drive on roads covered with snow or ice where the road conditions are unclear.

20

2

Share

How to Reset the Mercedes-Benz Window Lift Malfunction Light?

To reset the Mercedes-Benz window lift malfunction light, follow these steps: 1. Perform a reset procedure. 2. Press and hold the window control button for 3 seconds to reset. 3. The malfunction light will then be cleared. Causes and solutions for window lift failure: 1. If the lubricant in the door's window regulator is depleted, remove the inner cover and replenish the lubricant. 2. If the window is completely inoperative, the switch may be faulty, requiring replacement. Additional information: Mercedes-Benz vehicle glass is made of silica glass, containing over 70% silicon oxide, with the remainder composed of sodium oxide, calcium oxide, magnesium, etc., manufactured through the float glass process. The glass is then further processed into tempered or laminated glass.

20

4

Share

What is the function of the front oxygen sensor?

The function of the front oxygen sensor is to detect the oxygen content in the exhaust gases produced after the combustion of the air-fuel mixture in the cylinders. Here are the relevant details: 1. The front oxygen sensor detects the oxygen content in the exhaust gases. Generally, a high oxygen content indicates a lean mixture, while a low oxygen content indicates a rich mixture. The front oxygen sensor transmits different electrical signals to the ECU based on the oxygen content, allowing the ECU to adjust the air-fuel mixture accordingly. 2. The automotive oxygen sensor is used to monitor the state of exhaust gases entering the three-way catalytic converter. It is an essential sensor for engines equipped with a three-way catalytic converter. If the engine's air-fuel ratio deviates from the theoretical air-fuel ratio, the three-way catalyst's ability to purify CO, HC, and NOx drops significantly. Therefore, to achieve optimal exhaust purification performance in engines with a three-way catalytic converter, the air-fuel ratio of the mixture must be tightly controlled within a narrow range around the theoretical air-fuel ratio.

20

1

Share

How to Shift When D and S Gears Are Combined?

Method for shifting when D and S gears are combined: When switching from D gear to S gear or from S gear to D gear, there is no need to press the brake pedal or stop the vehicle. You can directly switch while driving. The combination of D and S gears is designed for the convenience of the driver during operation. D gear is the forward driving gear, while S gear is the sport mode. The gears of an automatic transmission are as follows: 1. D gear refers to the forward driving gear; 2. R gear refers to the reverse gear; 3. P gear refers to the parking gear; 4. L gear refers to the low-speed gear; 5. N gear refers to the neutral gear; 6. W gear refers to the snow/rain mode gear; 7. S gear refers to the sport mode driving gear.

1

4

Share

To what level should motorcycle oil be filled?

What are the differences between the Buick GL8 652T and 653T?

Does the 2021 Bora have front and rear anti-collision beams?

What should be paid attention to when driving in snowy weather?

How to Reset the Mercedes-Benz Window Lift Malfunction Light?

What is the function of the front oxygen sensor?

How to Shift When D and S Gears Are Combined?

Can a Keyless Entry Car Key Lock the Car When Inside?

What Causes the Brakes to Jerk?

Can Motorcycle Drum Brakes Be Converted to Disc Brakes?

What is a Mini car?