To what extent should I practice for the Subject 4 test?

1 Answers
MacJulian
07/30/25 8:55am
Subject 4 practice should reach a level of high accuracy. Here is an introduction to the knowledge of Subject 4: Definition: Subject 4, also known as the Subject 4 theory test or driver theory test, is part of the motor vehicle driver's license assessment. Common name: After the implementation of the "Order No. 139 of the Ministry of Public Security of the People's Republic of China", the Subject 3 test was divided into two parts. In addition to the road test, a safety and civilization knowledge test was added, commonly known as "Subject 4", which assesses "driving ethics". Because this test is conducted after Subject 3, it is commonly referred to as the Subject 4 test. In official terms, there is actually no Subject 4.
Was this review help?
12
4
Share
More Forum Discussions

What is the EPC warning light?

epc warning light indicates a malfunction in the vehicle's Electronic Stability Program (ESP) system. Here are the relevant details: 1. Causes of the malfunction: The issue arises when sensors or control units of the electronic stability system fail. When this warning light appears, the vehicle should not be driven, and the electronic throttle needs cleaning to resolve the problem. 2. Solutions for the malfunction: The EPC (Electronic Power Control) system in vehicles manages engine power. When the EPC indicator lights up, contact after-sales service or a repair shop for inspection and maintenance. Normally, the EPC light performs a self-check during vehicle startup, illuminating for a few seconds before turning off. If the light remains on, it indicates a system malfunction.
4
2
Share

What are the reasons for engine authentication failure?

There are several possible reasons for engine authentication failure: 1. The internal chip of the key is not matched/locked. 2. Fault in the anti-theft read coil. 3. Communication failure between the anti-theft coil and the anti-theft control unit. 4. Internal failure of the anti-theft control unit/communication failure with the engine control unit/lack of matching between them. 5. Electromagnetic wave interference, etc. The solutions for engine authentication failure are as follows: 1. Open the door and sit in the driver's seat, take out the car remote key, and place it on the one-touch start button for more than 30 seconds. 2. While keeping the key on the one-touch start button, press the unlock button on the remote key. 3. Press the lock button and trunk button a few more times. 4. If the engine system authentication failure alarm still cannot be resolved after several attempts, it is recommended to take the car to a repair shop for inspection.
7
4
Share

What is VTEC?

VTEC is the Variable Valve Timing and Lift Electronic Control System, 1. VTEC is a self-developed variable valve timing and valve lift electronic control system introduced by Honda, which can simultaneously control valve opening/closing timing and lift under two different conditions. 2. VTEC can appropriately adjust valve timing and lift according to changes in engine speed, load, water temperature and other operating parameters, enabling the engine to achieve maximum efficiency at both high and low speeds. 3. In the VTEC system, there are three cam surfaces on the intake camshaft that respectively push three rocker arms on the rocker shaft. When the engine is at low speed or under low load, there is no connection between the three rocker arms. The left and right rocker arms push two intake valves separately, giving them different timing and lift to create a squish effect.
9
5
Share

What is the purpose of anti-skid control?

Anti-skid control primarily manages the longitudinal and lateral stability of the vehicle, ensuring it moves according to the driver's intentions. Below are the functions of anti-skid control: 1. When the tires are about to lock up, the anti-skid system performs "mechanical cadence braking" with hundreds of brake applications within one second. 2. It allows the vehicle to maintain steering control via the steering wheel even during full braking. 3. When the drive wheels slip, the engine ECU reduces throttle intake, lowering engine speed and thereby decreasing power output. Below are the key benefits of anti-skid control: 1. Installing anti-skid control can effectively reduce fatal traffic accidents by 43%. 2. Making anti-skid control a standard feature can reduce passenger car single-vehicle accidents by 34%, passenger car rollovers by 71%, and even decrease SUV single-vehicle accidents by 59%. 3. Anti-skid control is mainly used for emergency obstacle avoidance during continuous steering. During emergency maneuvers, it intervenes to increase the turning force on the drive wheels; when a tailspin tendency occurs, it applies braking to the opposite wheels to reduce rotation, helping the vehicle follow the driver's steering intentions.
13
2
Share

What does car understeer mean?

Car understeer refers to a phenomenon where the front wheels cannot provide sufficient steering force due to reasons such as entering a turn too quickly or insufficient front tire grip, causing the vehicle to fail to follow the intended path and slide outward during a turn. Below are related explanations: 1. Causes of understeer in front-wheel-drive cars: Front-wheel-drive cars are front-heavy, and the centrifugal force at the front exceeds the grip capacity of the front tires, preventing the front from turning along the intended path. Once the grip limit is exceeded, further steering input is ineffective, and the vehicle is in an uncontrolled state. 2. Causes of oversteer in rear-wheel-drive cars: This occurs when excessive throttle is applied during a turn. Since the drive is at the rear wheels, it causes rotation around the front wheels as the pivot point. At this point, counter-steering and reducing throttle can straighten the car body, which can be controlled by experienced drivers.
16
5
Share

What Causes the Engine Malfunction Light to Turn On and Then Off?

The reasons for the engine malfunction light turning on and then off can vary based on actual circumstances, including the following scenarios: 1. The vehicle's self-check function is in operation: If the engine malfunction light turns on briefly and then off when the vehicle's power is turned on before starting the car, and other warning lights such as those for coolant temperature, battery, and airbags behave similarly, this is a normal situation. This occurs because the vehicle's self-check function is running. 2. The engine malfunction light turns on and off while driving: If this happens while driving, the driver should observe whether the engine shows any abnormalities. If the engine malfunction light does not come on again, it is likely a false alarm. However, if the engine malfunction light intermittently turns on and off, the driver should pull over safely, turn off the engine, and restart the vehicle. If the engine malfunction light continues to exhibit this behavior, it is advisable to visit a 4S shop or repair facility for inspection as soon as possible.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.