Tips for Removing White Parking Space Lines?

2 Answers
Gloria
07/29/25 1:02am
Parking space lines can be most effectively removed by grinding off a layer. Here are some methods for removing white parking space lines: 1. Painting Method: Apply black paint over the old markings. This is a temporary solution. 2. Cutting Method: Use a specialized grinding machine to polish and cut. The advantage is mechanized operation with better and cleaner removal effects, but it can easily damage the road surface, especially with domestic grinding machines. Suitable for thinner thermoplastic markings. 3. Sandblasting Method: Modified based on the principle of sandblasting rust removal from steel plates. When used properly, it can completely remove markings without damaging the road surface. The downside is that it is expensive, difficult to recycle, and consumes a lot of resources. 4. Thinner Cleaning: May not achieve complete removal, only lightening the color. Thinner, also known as diluent or solvent oil, is usually a colorless transparent liquid, commonly called banana oil. Due to its volatile nature, special attention must be paid to fire prevention during use.
Was this review help?
11
0
Share
LeFernando
08/12/25 5:12am
As a DIY enthusiast who loves tinkering with parking spaces at home, my secret to removing white lines is using a high-pressure water jet combined with scrubbing using a stiff-bristle brush. For particularly stubborn paint, I first spray some paint remover and let it soak for about ten minutes before scrubbing. Safety-wise, it's important to wear goggles and gloves to prevent chemicals from splashing onto the skin or eyes, and it's best to choose a sunny day for the job as higher temperatures speed up the process. I once tried scraping directly with a shovel, which ended up leaving small pits on the ground and cost me a pretty penny to repair, so gentle and repeated treatments are safer. After cleaning, make sure to sweep away any water residue to prevent slipping, and also check if the parking space surface is intact. Regular maintenance of parking lines helps avoid buildup, and these little tricks have saved me a lot of hassle!
Was this review help?
17
0
Share
Expand All
More Forum Discussions

Where is the turn signal flasher located on the Fengyun 2?

The turn signal flasher of the Fengyun 2 is located in the fuse box under the steering wheel in the main driver's compartment. The Fengyun 2 is a new fashionable lifestyle model developed by Chery (including both sedan and hatchback versions). It has undergone a revolutionary transformation in appearance, incorporating more trendy and avant-garde elements, differing from the conservative styling of older Chery models. The headlights feature an eagle-eye design with integrated LED turn signal indicators. The Fengyun 2 measures 4188mm in length, 1686mm in width, and 1480mm in height, with a wheelbase of 2527mm. It is a 5-door, 5-seat hatchback equipped with a 5-speed manual transmission and a 1.5L L4 engine, delivering a maximum horsepower of 109ps and a maximum torque of 140nm.
1
2
Share

What Causes Audi's Auto Start-Stop Malfunction?

Audi's auto start-stop malfunction could be due to accidentally pressing the auto start-stop button on the vehicle, causing the system to turn off. Generally, Audi vehicles have the start-stop system enabled by default. If it suddenly stops working, it's necessary to check whether the system has been deactivated. The engine auto start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop (such as at a red light) and restarts it when it's time to move forward again. Audi is a luxury car brand under Audi AG, a subsidiary of the Volkswagen Group in Germany. Known for its high technical standards, quality, innovation, and classic car models, Audi is one of the leading automotive brands. Taking the Audi A3 as an example, the car measures 4343mm in length, 1815mm in width, 1458mm in height, with a wheelbase of 2630mm.
11
2
Share

What is the battery model and specification for the Ford Edge?

Ford Edge battery model is Varta 6QW80(650)L. The Ford Edge battery comes with start-stop functionality, so the vehicle has different requirements for the battery. The replacement battery specifications must be exactly the same as the original battery. The Ford Edge has a length, width, and height of 4878mm, 1925mm, and 1734mm respectively, with a wheelbase of 2850mm. The body type is a 5-door, 5-seat SUV, equipped with an 8-speed automatic transmission and a 2.0T L4 engine, delivering a maximum horsepower of 245ps, maximum torque of 390nm, and maximum power of 180kw.
9
2
Share

What does BND mean in a car?

BND in a car refers to the band switch, which is found on the car audio system. By pressing the BND button, you can select between 3 FM or 2 AM band radio stations. The car audio system also includes other common buttons, such as MUT, which mutes the audio when pressed. The AMS button, when held down for more than 2 seconds in radio mode, automatically saves the received station to one of the 1-6 preset stations. A short press of this button cycles through these 6 stations, pausing for 5 seconds on each. In MP3 mode, pressing the AMS button allows you to navigate through the MP3 menu.
2
0
Share

Is the Passat's Transmission Wet or Dry?

The Passat series all use wet dual-clutch transmissions. The 1.4T model is equipped with the DQ381, while the 20T model uses the DQ500. Both the DQ381 and DQ500 are wet dual-clutch transmissions, with the main differences being the maximum torque they can withstand and slight variations in transmission logic. The Passat measures 4933mm in length, 1836mm in width, and 1469mm in height, with a wheelbase of 2871mm. It is a 4-door, 5-seater sedan featuring a 7-speed dual-clutch transmission and a 1.4T L4 engine that delivers a maximum horsepower of 150ps and a maximum torque of 250nm.
4
3
Share

How to release the P gear on Mercedes-Benz column shifter?

Method to release the P gear on Mercedes-Benz column shifter: There is a button at the far right end (top) of the column shifter. Press this button once to release the P gear. Similarly, you need to press this rightmost button when engaging the P gear. Most Mercedes-Benz models use column shifter design, with the neutral (N) position as default. Pushing the shifter downward from N position engages Drive (D), while pulling upward engages Reverse (R). The protruding part at the far right is the button controlling the P gear. Mercedes-Benz is a German automotive brand renowned for luxury and high performance, headquartered in Stuttgart, Germany, and a member of Daimler AG. Its product range includes various passenger vehicles and medium/large commercial vehicles. Taking the Mercedes A-Class as an example, its dimensions are 4622mm (length) × 1796mm (width) × 1454mm (height), with a wheelbase of 2789mm.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.