Tips for Learning Subject 2 (Automatic Transmission)
4 Answers
Subject 2 operation tips: 1. Note: Use D gear idle speed throughout the process, do not step on the accelerator to speed up, drive steadily and slowly. 2. Parallel parking: If the rear wheels cannot be seen in the rearview mirror during parallel parking, you can stick your head out or tilt your head to look in the rearview mirror. 3. Starting on a slope: Pay attention to the fixed point on the slope if you are not sure. When starting on the slope, put it in D gear, release the handbrake, and control the accelerator to avoid stalling or rolling back. 4. Right-angle turn: Before entering the right-angle turn, you can slow down or stop to straighten the wheels or the body, and try to get as close as possible to the right side line. 5. Curve driving: Do not be too hasty with the steering during curve driving, and try to take a large circle after entering the curve. 6. Reversing into the garage: Reverse into the garage at idle speed throughout the process, accurately judge your position, control the key points and time, and know how to make slight adjustments to correct the deviation when it is found in the rearview mirror.
When I first started learning automatic transmission for Subject 2, I was super nervous. The instructor said the key is to control the speed, using the brake to move slowly and avoid touching the accelerator to prevent going too fast. For reversing into the garage, align with the markings on the ground, turn the steering wheel all the way, then straighten it out—done. For parallel parking, rely on the rearview mirror to observe the position of the rear wheels and avoid turning too sharply. Starting on a slope is the easiest—just stop firmly with the brake and release it directly, no need to worry about stalling. Keep a relaxed mindset, practice the course route more, and remember reference points like aligning your shoulder with markers. Practice for an hour daily to build confidence, and do a few mock tests before the exam to reduce mistakes. Safety on the course is also important—check that the gear is in R or D before starting, and develop good habits to avoid distractions.
After passing the automatic transmission Subject 2 test, I found the slope fixed-point parking quite challenging. The trick is to lightly press the brake until you feel slight body vibration indicating the car is stabilized, then start directly to pass. When reversing, keep a close eye on the reference points in the rearview mirror without hesitation, and make steering wheel movements decisively. For parallel parking, remember to turn the wheel when the rear of the car aligns with the pole. Practice maintaining a constant speed regularly. Although automatic transmission operation is simpler, don’t be careless—errors often occur due to inaccurate position judgment. It’s advisable to note down each reference point taught by the instructor and review them repeatedly. Changes in lighting conditions at the test site can interfere with judgment, so adapt to the environment in advance to ensure performance. Sharing a mistake: never touch your phone during the test—stay focused.
Having taught automatic transmission Subject 2 for many years, I emphasize that foundational training is most crucial. First, familiarize yourself with steering wheel rotations to develop hand feel, then practice controlling each item at low speeds. For reverse parking, the target points must be precise, such as straightening the wheel when the lower edge of the rearview mirror touches the line. For parallel parking, just keep the wheels close to the edge. Hill starts are easy without clutch operation. Simulating the exam process multiple times boosts confidence and reduces the impact of nervousness. During practice, it's recommended to tackle each item one by one rather than practicing all at once. First, understand the theory behind the actions, then proceed to hands-on practice for better results. Field markings are key auxiliary tools—don't overlook adjusting the seat and rearview mirror positions.
