Tips for Answering Multiple-Choice Questions in the Driving Test

1 Answers
LeWillow
07/30/25 6:18am
First, look at the answer options. In multiple-choice questions, the options are often the key to answering. After reviewing the options, approach the question with these answers in mind. Keywords. Generally, statements that are too absolute or lack proper driving etiquette are incorrect. Practice more questions. The multiple-choice questions in Subject 4 include text-based, image-based, and video-based questions. Before the test, you can practice targeted simulation exercises by working through the question bank on your phone. Focus on mistakes. When you encounter incorrect or unfamiliar questions during practice, you can drill them separately to reinforce your memory of these mistakes. Determine right and wrong. Basically, actions you are not allowed to do are correct, letting others go first is correct, and slow actions are correct. Conversely, fast actions are wrong. Read questions carefully. During the test, pay attention to the wording of the questions, as they can often be confusing, misleading, or altered in sequence to misguide you.
Was this review help?
11
3
Share
More Forum Discussions

What engine does the Mercedes-Benz CLK use?

Here are the specific details about the Mercedes-Benz CLK engine: 1. The 1.8L supercharged engine delivers 184 horsepower and a maximum torque of 250 Nm. This engine reaches its maximum power at 5500 rpm and its maximum torque between 2800 and 5000 rpm. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. 2. The 2.6L naturally aspirated engine produces 177 horsepower and a maximum torque of 240 Nm. This engine achieves its maximum torque at 4500 rpm and its maximum power at 5700 rpm. It also features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. 3. The 3.0L naturally aspirated engine generates 231 horsepower and a maximum torque of 300 Nm. This engine reaches its maximum torque between 2500 and 5000 rpm and its maximum power at 6000 rpm. It is equipped with multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. 4. The 3.5L naturally aspirated engine delivers 272 horsepower and a maximum torque of 350 Nm. This engine achieves its maximum torque between 2400 and 5000 rpm and its maximum power at 6000 rpm. It also features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block.
18
3
Share

What Causes the Sizzling Sound When Accelerating a Car?

Car accelerating with a sizzling sound can be caused by the following reasons: 1. Abnormal engine noise. There are many possibilities for abnormal noises in the engine compartment, usually a sharp metal sound or a wind-like abnormal sound. 2. Abnormal transmission noise. The noise disappears when the clutch or accelerator is pressed, and there is a whistling-like sound when shifting gears. 3. Wear and abnormal noise. When driving and pressing the accelerator or brake, there are always some abnormal noises from certain parts of the car body. The sound is not loud and does not affect normal driving. Solutions for the sizzling sound when accelerating a car are as follows: 1. Abnormal engine noise. Engine abnormal noise indicates that the technical state of a certain mechanism of the engine has changed. It is mainly caused by excessive wear of some parts or improper assembly and adjustment. Some abnormal noises can also predict that the engine may suffer accidental damage. Therefore, when the engine makes abnormal noises, it should be repaired in time to prevent the fault from expanding. 2. Abnormal transmission noise. The transmission has many parts, and the causes of noise are also relatively complex. When analyzing and judging, pay attention to: whether it is related to a specific speed, such as some planetary gears making noise that is more obvious at about 50Km/h. Whether it is related to certain gears, which is very important for judging transmission faults. If a certain gear makes noise, it is definitely related to the parts that affect the transmission of that gear; if all gears make noise, it is often a fault of the constant meshing gear shaft or lack of oil in the transmission. Whether it is related to specific actions, such as shifting up and down, starting, rapid acceleration, rapid deceleration, turning, etc., are all effective means to judge abnormal noises. Among them, changing speed and direction are particularly important for judging rear axle faults. 3. Wear and abnormal noise. Solution: Door abnormal noise is mainly caused by lack of lubrication, but it is necessary to determine whether it is the door hinge position or the internal door glass lifter, door lock mechanism, handle mechanism, etc.
3
3
Share

Is it necessary to use 95 octane gasoline for the Bora 1.4T?

According to the official car manual recommendation, the Bora 1.4T should use 95 octane gasoline. In addition to checking the appropriate gasoline grade in the car manual, the Bora 1.4T can also be checked on the fuel tank cap, which will also indicate the recommended grade. Generally, the gasoline grade can also be determined based on the engine's compression ratio. Cars with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the use of some new technologies nowadays, the gasoline grade cannot be solely determined by the compression ratio. High compression ratio engines can also be tuned to use lower octane gasoline because, apart from the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline octane number, the higher the octane value and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the Bora 1.4T occasionally uses the wrong gasoline grade, simply switch back to the correct grade after consumption. However, long-term use of the wrong gasoline grade may have the following effects: For vehicles recommended to use lower octane gasoline, using higher octane gasoline will not cause damage, but the increase in octane value will alter the fuel's ignition point, leading to delayed combustion in the engine. This means the engine's power output and thermal efficiency will decrease, resulting in poorer performance as experienced by the driver. For vehicles recommended to use higher octane gasoline, using lower octane gasoline may cause engine knocking. Because the octane value is much lower, the gasoline's ignition point decreases, causing it to ignite prematurely during the compression stroke. If the gasoline ignites before the spark plug fires during the compression stroke, resistance will occur during the upward stroke. This resistance will make the engine run very unstably. If the knocking is imperceptible, it will only increase noise without significant damage to the engine. However, if noticeable knocking occurs, it indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on the pistons and cylinders, and in severe cases, cylinder scoring.
2
2
Share

How many kilometers is the break-in period for the Audi A5?

Audi A5 has a break-in period of 3,000 kilometers. When a car is newly acquired, the process of wearing off metal debris and burrs from the components is called break-in. Below are specific details regarding break-in period precautions: 1. Avoid emergency braking: Emergency braking not only harms the braking system during the break-in period but also increases the impact on the engine and transmission. 2. Do not drive at high speeds: Owners who tend to floor the accelerator should note that the engine has limited capacity; do not overload it. Try to keep the engine speed steady below 3,000 rpm. 3. Avoid overloading: Overloading makes steering heavy, increases centrifugal force, and affects the car's handling performance; long-term overloading also shortens the car's lifespan and accelerates component wear. Keep the total weight of the car and cargo within 70% of the rated load. 4. Use high-quality fuel: There are many types of fuel on the market; choose fuel that meets national standards, as substandard fuel can clog the fuel tank and lines. 5. Warm up the car before cold starts: Warming up the car: first, it ensures smooth engine startup; second, it effectively saves fuel; third, it reduces wear on moving parts. 6. Use the appropriate gear: Manual transmission owners, please note that the gear should match the engine speed—remember, high speed for high gear and low speed for low gear.
4
2
Share

What car brand has a V-shaped logo?

It is the domestically produced Changan with a military-industrial background. Changan Automobile is one of the four major automotive group enterprises in China, boasting a 155-year history and 34 years of car manufacturing experience. It operates 19 production bases and 36 vehicle and engine factories worldwide, with a presence in 10 key overseas markets. From January to July 2017, it sold a cumulative total of 1.591 million vehicles, ranking fourth in China's automotive industry. Relevant details are as follows: 1. Diverse vehicle lineup: Changan Automobile has developed a comprehensive product range covering micro vehicles, sedans, buses, trucks, SUVs, and MPVs, spanning from entry-level to premium segments, with engine platforms ranging from 0.8L to 2.5L. In 2009, Changan's own brand ranked 13th globally and first in China, becoming one of the most valuable brands in China's automotive industry. 2. New energy development: Changan Automobile is advancing in energy-saving and new energy vehicles. China's first hydrogen internal combustion engine was successfully ignited at Changan, and the country's first industrialized hybrid car, the Jiexun, rolled off the production line and entered the market, becoming the only demonstration vehicle for the State Council's Government Offices Administration.
12
3
Share

What does it mean when the engine malfunction indicator light flashes and there is shaking?

When the engine malfunction light is on and the vehicle body shakes, the cause is poor combustion of the air-fuel mixture. Poor combustion of the air-fuel mixture can lead to carbon buildup in the engine, which is the most significant reason for vehicle shaking. Additionally, when the oxygen sensor detects poor combustion and reports it to the ECU, the malfunction light is triggered as a warning. This is why the engine malfunction light and vehicle shaking occur simultaneously. Issues such as faulty spark plugs, defective ignition coils, malfunctioning fuel pumps, or clogged fuel lines can all cause poor combustion of the air-fuel mixture in the engine. If the engine malfunction light is on, follow these steps: First, check if the engine is running normally. Look for signs like shaking, black smoke emission, or difficulty starting. If any of these symptoms are present, avoid restarting the engine. Note: Do not restart the engine if the red warning light is on. If the engine is running normally and the vehicle can be driven, proceed to a service station as soon as possible to diagnose the issue. A service station can easily read the trouble codes using a portable diagnostic tool, allowing for targeted repairs based on the fault information. If the engine is running normally, the owner can also try gently reconnecting various wiring harness connectors, as a loose connection might be the cause. Alternatively, repeatedly turning the key to the ON position may help reset the system.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.