Three Sentences to Report to the Examiner in Subject Three?

2 Answers
StAlexandra
07/29/25 6:00pm
Subject Three report to the examiner three sentences include vehicle safety check completed, etc. Before getting in the car: The vehicle safety check is completed, request to get in the car. After getting in the car: Hello examiner, this is my ID card. Examiner, all vehicle instruments are normal, the student is ready, request to start the test. After getting out of the car: Thank you examiner, then gently close the car door, don't slam it. Subject Three: The situation of completing the test items while driving a motor vehicle on the road, complying with traffic laws and regulations, and the comprehensive ability to control the motor vehicle; the situation of correctly using lights, horns, seat belts and other devices; the ability to correctly observe and judge road traffic conditions.
Was this review help?
13
2
Share
VonDaisy
08/14/25 10:05am
I remember when I was a driving instructor, I always emphasized the three key sentences for the Subject 3 test report: 'Hello examiner, I am candidate Wang Qiang,' 'I am ready for the test,' and 'May I begin?' This is not only polite and safe but also builds confidence. During regular practice sessions, I would have students simulate this ten times to ensure their voices were loud and their speech steady. The Subject 3 test focuses on details, such as checking the seatbelt and mirrors before reporting to avoid missing anything. Once, a student was in such a hurry they skipped the report, and the examiner deducted basic points. In contrast, other students who followed the standard procedure had a higher pass rate. Proper use of lights and turn signals during the test is also crucial, and after reporting, don’t forget to adjust your emotions and breathing. True safe driving starts with a sense of ritual—developing these habits ensures you won’t slip up when driving.
Was this review help?
10
3
Share
Expand All
More Forum Discussions

What Causes the Metallic Clanging Sound When Front Wheels Go Over Potholes?

The causes of metallic clanging sound when front wheels go over potholes are: 1. Damaged shock absorber top mount; 2. Broken suspension spring; 3. Faulty brake caliper pin; 4. Loose brake disc shield; 5. Loose brake pad retaining clip; 6. Stabilizer bar malfunction; 7. Faulty wheel bearing; 8. Loose chassis bolts. Solutions for metallic clanging sound when front wheels go over potholes: 1. Replace shock absorbers or suspension springs; 2. Repair brake system faults; 3. Replace wheel bearings; 4. Perform regular vehicle maintenance. Vehicle maintenance refers to preventive work involving inspection, cleaning, replenishment, lubrication, adjustment or replacement of certain components, also known as automotive servicing.
14
0
Share

What is the difference between internal circulation and external circulation in a car?

The difference between internal circulation and external circulation in a car is: 1. The indicator for internal circulation is an arrow pointing inward; the symbol for external circulation is from outside to inside. 2. Different functions: Internal circulation effectively prevents external dust and harmful gases from entering the car, improving the cooling and heating efficiency of the air conditioning; external circulation draws fresh air from outside into the car, maintaining air quality inside the vehicle. The methods for using car air circulation are: 1. Use internal circulation during traffic jams and external circulation during high-speed driving; 2. The use of internal and external circulation should be combined with air conditioning and heating; 3. Use external circulation during long-distance driving to allow fresh air from outside to enter the car, avoiding excessively low oxygen levels inside the vehicle.
3
5
Share

What is the longest Chery car?

Chery's longest model is the Exeed VX, measuring 4840mm in length, 1925mm in width, and 1745mm in height, equipped with 1.6T and 2.0T engines. Introduction to vehicle dimensions: The length, width, and height data represent the external dimensions of the vehicle body. The width measurement excludes the side mirrors, while the height measurement includes roof racks but excludes antennas. Vehicle classification is generally determined by body length and wheelbase. Actual vehicle space: Even if two vehicles share identical exterior dimensions, their interior space may differ. When selecting a car, don't rely solely on specifications—experience the cabin space firsthand.
1
5
Share

What are the three modes of the Haval M6?

The three modes of the Haval M6 are: Sport mode, Eco mode, and Comfort mode. The Haval M6 is a compact SUV. Taking the 2021 Haval M6 as an example, its body dimensions are: length 4664mm, width 1830mm, height 1729mm, with a wheelbase of 2680mm and a fuel tank capacity of 55 liters. The 2021 Haval M6 is equipped with a 1.5T turbocharged engine, with a maximum power of 110kW, reaching maximum power at 5600 to 6000 rpm, and a maximum torque of 210Nm, achieving maximum torque between 1800 to 4400 rpm.
4
0
Share

How to adjust the time on Honda CRV's clock?

Honda CRV's clock adjustment method is: 1. Click the car menu toggle button to bring up the time adjustment function; 2. Use the RES and SET buttons on the multifunction steering wheel to adjust the time display; 3. Press the ENTER button on the left side of the multifunction steering wheel to confirm the time setting; 4. Observe the instrument panel to check if the time display is normal. The Honda CRV is a classic urban SUV model produced by Dongfeng Honda Automobile Company, with dimensions of 4550mm in length, 1820mm in width, and 1685mm in height, and a wheelbase of 2620mm. The vehicle features a stylish and dynamic exterior design with smooth lines, rounded yet sporty, and the interior adopts Honda's family style with a two-tone color scheme that is warm and clean, equipped with practical configurations.
11
5
Share

How to Match the Remote for Mazda6 Key?

Mazda6 key remote matching method is: 1. Insert the key into the ignition switch, complete the operation of turning the ignition switch on and off three times within 5 seconds; 2. Close and open the door three times, and on the third time opening the door, the door lock switch will activate once; 3. Press the lock button on the remote twice, and the door lock switch will activate once again; 4. Remove the key, the door lock switch will activate twice, the alarm horn will sound twice, indicating the remote matching is successful. The Mazda6 is a mid-size car with a body length, width, and height of: 4670 mm, 1780 mm, 1435 mm, respectively, a wheelbase of 2675 mm, and a fuel tank capacity of 64 liters.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.