The Process and Steps of Taking a Bus

How to reset the tire pressure light on a 2017 Cayenne?

First, after completing the tire repair and installation, it is essential to ensure that the air pressure in all four tires is uniform. If the pressures are not uniform, resetting the tire pressure indicator light will not be successful. Then, press and hold the MENU button on the combination switch to access the main menu. Select 'TYPE-PRESS,' which is referred to as 'Tire Pressure' in Chinese, and press the OK button. Next, choose 'Settings' and press the OK button to proceed to the next step. After entering the next step, select the 'Tire' option and press the OK button. Proceed by selecting 'Spare Tire' and pressing the OK button. Then, choose 'Sealing-set,' known as 'Tire Settings' in Chinese. At this point, the dashboard will prompt whether to proceed with the tire repair setting. Select 'YES,' and once the setting is successful, the tire pressure indicator light will turn off.

16

5

Share

Does Using Air Conditioning in Summer Affect Car Power?

Using air conditioning in summer does affect car power, and the smaller the engine displacement, the smaller the engine power, which naturally results in a greater impact on performance. Air conditioning directly affects engine power: There are two types of car air conditioning systems: independent and non-independent. Household cars typically use non-independent air conditioning, which relies directly on the engine's power. When the engine is running, it must allocate a portion of its power to the car's air conditioning system. Using air conditioning affects car speed: Taking a 1.8L engine as an example, when the air conditioning is turned on, the 0-100km/h acceleration time is slowed by 1-2 seconds. Data analysis across different speed ranges shows that the 0-60km/h acceleration process is less affected by air conditioning. In city driving, drivers don’t need to worry too much about the impact of air conditioning on car power. However, in the 60-100km/h acceleration range, the vehicle's power is noticeably reduced. During daily driving, if you need to quickly overtake the car ahead, temporarily turning off the air conditioning can be a simple and effective solution.

17

4

Share

Should a family car use 92 or 95 octane gasoline?

Family cars generally use 95 octane gasoline, but some vehicles may specify "only 92 octane gasoline should be used," in which case only 92 octane gasoline should be used. The following are the differences between 92 and 95 octane gasoline: Different compositions: 92 octane gasoline contains approximately 92% isooctane and 8% n-heptane, while 95 octane gasoline contains approximately 95% isooctane and 5% n-heptane. Isooctane has better anti-knock properties, while n-heptane has poorer anti-knock properties. Therefore, the higher the octane number, the higher the octane value, indicating better anti-knock performance of the gasoline. Each engine is comprehensively evaluated before leaving the factory, and based on the engine's performance and other data characteristics, the required anti-knock properties are specified, which determines the appropriate octane rating of gasoline to be used. Different power outputs: Higher octane gasoline, such as 95 octane, is suitable for engines with higher compression ratios. This is because as the engine speed increases, the ignition timing in the cylinder advances. When the speed reaches a critical point, the air-fuel mixture in the cylinder may ignite prematurely before the spark plug fires, a phenomenon known as "knocking." Increasing the octane value of the gasoline can effectively improve anti-knock performance.

10

4

Share

What does the EPC light mean in Volkswagen?

Possible reasons for the EPC light to illuminate: The car's throttle is dirty and needs cleaning. Brake system malfunction, in which case the brake light may also not work. Fuel quality issues, which can trigger the EPC warning light. EPC (Electronic Power Control) stands for Electronic Power Control system. When a sensor fails or detects an abnormal condition, the control system will take appropriate measures based on pre-set protocols. Reasons for the EPC light to illuminate include: Engine intake system malfunction, throttle failure, fuel system issues, Engine faults, ECU control unit problems, brake light failures. Solutions for EPC light illumination: Troubleshoot intake system issues, use compliant fuel, clean the throttle body, etc. Remove carbon deposits and clean related components. Re-flash relevant data (this is done when other issues have been resolved but the light persists). Other faults cannot be ruled out; proceed with repairs based on actual vehicle diagnostics. If the EPC light comes on, follow these steps: Restart the vehicle and check if the EPC light turns off. If it does, there may be no serious issue, as the EPC light can sometimes illuminate due to external interference. If the EPC light frequently illuminates over a period, first check if the brake lights are functioning. If they are not, inspect the brake switch, bulbs, and wiring (sometimes a faulty brake bulb can cause this issue; replacing it may solve the problem). If the EPC light remains on after checking the brake lights, visit a 4S shop for further inspection. The EPC indicator usually displays in two colors: yellow and red. A yellow EPC light means the vehicle can still be driven, but proceed cautiously to a repair point. A red EPC light indicates a serious issue; pull over immediately and contact a technician. Continuing to drive may damage core components or compromise safety.

11

0

Share

BMW 5 Series: Should You Use 95 or 98 Octane Gasoline?

According to the official vehicle user manual recommendation, the BMW 5 Series should use 95 octane gasoline. Due to its relatively high compression ratio, it is recommended to use 95 octane unleaded gasoline for the BMW 5 Series. While 98 octane gasoline can also be used, it offers lower fuel economy. In addition to checking the appropriate gasoline grade in the vehicle user manual, you can also find this information on the fuel tank cap, which will be clearly marked. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the application of some new technologies, the gasoline grade cannot be solely determined by the compression ratio. High compression ratio engines can also be tuned to use lower octane gasoline because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline octane number, the higher the octane value and the better the anti-knock performance. 98 octane gasoline contains 98% isooctane and 2% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the BMW 5 Series occasionally uses the wrong gasoline grade, simply switch back to the correct grade after consumption. However, prolonged use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower octane gasoline, using higher octane gasoline will not cause damage, but the increase in octane value will alter the fuel's ignition point, leading to delayed combustion in the engine. This means both the engine's power output and thermal efficiency will decrease, resulting in poorer performance as a practical feedback. For vehicles recommended to use higher octane gasoline, using lower octane gasoline can cause engine knocking. Due to the significantly lower octane value, the gasoline's ignition point decreases, causing it to ignite prematurely during the compression stroke. If combustion occurs before the spark plug ignites during the compression stroke, resistance will arise during the upward stroke. This resistance will make the engine operate very unstably. If the knocking is imperceptible, it only increases noise without obvious damage to the engine. However, noticeable knocking indicates severe engine conditions, where vibrations not only affect driving stability but also cause abnormal wear on the piston and cylinder, potentially leading to cylinder scoring in severe cases.

3

5

Share

Why does the BMW steering wheel require more force to turn?

It indicates that the power steering system cannot provide sufficient steering assistance or cannot provide any assistance at all. Firstly, the auto start-stop function has higher requirements for the battery, otherwise it can easily cause voltage instability, leading to program malfunctions.

6

1

Share

The Process and Steps of Taking a Bus

How to reset the tire pressure light on a 2017 Cayenne?

Does Using Air Conditioning in Summer Affect Car Power?

Should a family car use 92 or 95 octane gasoline?

What does the EPC light mean in Volkswagen?

BMW 5 Series: Should You Use 95 or 98 Octane Gasoline?

Why does the BMW steering wheel require more force to turn?

Does Modifying Low Beam Headlights Affect Annual Inspection?

Is it true that Chery acquired Volvo?

What are the penalties for driving the wrong way on a highway ramp in 2021?

What are the disassembly and installation steps for the instrument panel of the 2008 Teana?