The Origin of the Haval Car Name

What is the Difference Between Hardtop and Soft Top Convertibles?

Hardtop and soft top convertibles differ in the following aspects: 1. Space: Compared to hardtops, soft tops can be folded more compactly, thus occupying less space. Soft tops are typically made of fabric, which saves a significant amount of weight compared to metal roofs. Additionally, the rear window of a soft top is usually made of plastic, which is much lighter than the glass used in hardtops. 2. Price: Soft tops have fewer mechanical structures and electrical components than hardtops, making them more affordable. However, the main concern with soft tops is their lifespan. After years of sun exposure, the plastic rear window becomes more fragile, and older soft tops are more prone to tearing at high speeds. 3. Safety: Hardtops offer better safety than soft tops. In a normal collision, soft tops are more vulnerable. In the event of a rollover, the rear window of a hardtop convertible is made of glass, providing superior anti-theft performance and better resistance to damage from sharp tools compared to the plastic windows of soft tops.

9

2

Share

What is the fuel consumption of the Haval H6 National Tide 1.5T?

Haval H6 National Tide 1.5T has a combined fuel consumption of 6.6-6.9L/100km. Currently, there are five models of the Haval H6 National Tide 1.5T available for sale: the Automatic Luxury Edition, Automatic Super Luxury Edition, and Automatic Champion Edition, with a combined fuel consumption of 6.6L/100km. The Automatic Urban Edition and Automatic Champion Edition have a combined fuel consumption of 6.9L/100km. The above figures are NEDC combined fuel consumption, measured under the NEDC test procedure. Actual fuel consumption is higher than this value, ranging from 8.0-13.0L/100km. Methods to reduce fuel consumption: Clean engine carbon deposits: Excessive engine carbon deposits are a significant cause, mainly due to the use of unsuitable fuel. It is recommended to add a certain amount of cleaner when refueling. If the effect is not noticeable, it indicates a large amount of carbon deposits in the engine. In this case, the car must be taken to a 4S shop for professional cleaning of the engine carbon deposits by technicians. Check the oxygen sensor: As an internal control unit of the car, the oxygen sensor mainly monitors the air-fuel ratio of the engine. Once damaged, it will cause an imbalance in the air-fuel ratio, leading to a sudden increase in fuel consumption. If the oxygen sensor is damaged, the exhaust pipe will emit darker-colored exhaust gases during driving, and the oxygen sensor should be replaced immediately. Regularly replace the three filters: During vehicle use, the oil filter, air filter, and fuel filter must be replaced regularly. If not replaced for a long time, they become dirty and send incorrect information to the engine control unit, resulting in incomplete fuel combustion and increased engine carbon deposits. Check the electronic control unit: Although the engine's electronic control unit is highly reliable, in older vehicles, various faults may inevitably occur.

18

4

Share

Where should the motor vehicle inspection sticker be placed?

Motor vehicle inspection stickers should be affixed to the upper right corner of the front windshield. Here is additional information: 1. Definition of the inspection certificate: The vehicle inspection certificate is an important document for a car and is required when registering the vehicle. Only vehicles with a valid inspection certificate meet the national standards for motor vehicle equipment quality and related requirements, and can proceed with motor vehicle registration. 2. Application conditions: The motor vehicle must have reached its inspection expiration date; provide the proof and certificates required by laws, regulations, and departmental rules; and all road traffic safety violations and accidents involving the vehicle must be resolved.

11

4

Share

What is the Proper Position for Rearview Mirrors?

Adjust the rearview mirrors to minimize blind spots as much as possible. Below are detailed instructions for adjusting the rearview mirrors: 1. Adjusting the left side mirror: The driver should use the horizon as a reference. Adjust the vertical angle so that the sky and ground each occupy half of the mirror. Then, adjust the horizontal angle so that the car body occupies about 1/4 of the mirror's surface. Note that when adjusting the mirror, the driver's seating position should be the same as when driving, and not leaning closer to the mirror for observation. 2. Right side mirror: Reduce the space occupied by the sky. Therefore, compared to the left side mirror, the right side mirror should have a different sky-to-ground ratio, with the sky occupying 1/4 and the ground occupying 3/4.

18

1

Share

What to Do If the New Vehicle Certificate Is Lost?

First, the individual should write an application explaining the loss situation and obtain a loss certificate from the local police station. Submit copies of the buyer's ID, purchase invoice, and other materials to the 4S store where the car was purchased. Fill out the application, specify all the information required for the reissuance of the certificate, and then send it back to the manufacturer. The vehicle certificate is an important document for the car and is also necessary for vehicle registration. Here is some information about the vehicle certificate: 1. Introduction: Only vehicles with a certificate meet the national requirements for motor vehicle equipment quality and related standards and can proceed with motor vehicle registration. 2. Note: For vehicles that are not imported through customs or exempted from safety technical inspections as stipulated by the competent department of motor vehicle products under the State Council, a motor vehicle safety technical inspection certificate must also be submitted. The vehicle management office should, within two days from the date of accepting the application, confirm the motor vehicle, verify the vehicle identification number impression, review the submitted certificates and documents, and issue the motor vehicle registration certificate, license plate, driving license, and inspection qualification mark.

9

3

Share

What is the function of a car exhaust fan?

Car exhaust fans are primarily used for engine heat dissipation and coolant cooling, ensuring that the engine does not overheat and malfunction. The car engine must be adequately cooled in high-temperature working environments to maintain it at an appropriate operating temperature, thereby meeting the requirements for good engine performance, durability, and exhaust emissions. The following details about car exhaust fans: 1. Definition of an exhaust fan: An exhaust fan is a type of air conditioning appliance that uses an electric motor to drive the fan blades, creating airflow to exchange indoor and outdoor air. 2. Operating principle of an exhaust fan: To reduce engine power loss and save fuel, mechanical fans often employ fan control devices to manage the engagement and disengagement of the cooling fan and the drive pulley. Common fan control devices include hydraulic clutches, automatic clutches, and hydraulic couplings.

5

4

Share

The Origin of the Haval Car Name

What is the Difference Between Hardtop and Soft Top Convertibles?

What is the fuel consumption of the Haval H6 National Tide 1.5T?

Where should the motor vehicle inspection sticker be placed?

What is the Proper Position for Rearview Mirrors?

What to Do If the New Vehicle Certificate Is Lost?

What is the function of a car exhaust fan?

Will holding a child in the front passenger seat on the highway result in penalty points?

How to Know the Manufacturing Date of a Car?

What is the validity period of a vehicle fire extinguisher?

Can I use 92# gasoline if the car is labeled for 95# gasoline?