The Hazards of Car Sunshades?

2 Answers
DiBethany
07/29/25 2:45am
Here are the specific hazards of car sunshades: 1. Obstructing the driver's view. When installing sunshades, ensure they do not obstruct the driver's line of sight, as they can sometimes interfere with visibility during turns, potentially leading to accidents. 2. Installation issues. When installing sunshades, make sure they are securely fastened and pay attention to the installation details to prevent rattling or detachment due to improper installation. 3. Quality concerns. The quality of sunshades varies widely. It is advisable to choose well-known brands with good reputations to avoid unnecessary problems caused by poor quality.
Was this review help?
20
2
Share
MacKeira
08/12/25 6:41am
I've been driving for twenty years and have seen many friends using car sunshades. While they seem convenient for blocking the sun on the surface, they pose several potential hazards. The biggest issue is the impact on visibility safety. If you forget to remove it when driving, it can suddenly slide off during startup or sharp turns, directly covering the windshield and obstructing your view, which can easily lead to rear-end collisions or hitting objects. I've personally witnessed a neighbor almost hit a tree because this small item delayed their reaction by half a second. Additionally, low-quality materials can melt, smoke, or even catch fire on hot days, especially when the car temperature can exceed 60 degrees Celsius in summer—the consequences of a fire are unimaginable. Moreover, if not securely installed, the shade can interfere with the windshield wipers or rearview mirror, causing distractions while driving. I recommend using it only when parked, choosing reputable brands to ensure proper thickness and stability, and not compromising safety to save a little sun protection time. Regular inspection and cleaning are also crucial; otherwise, accumulated dust and mold can make things worse. In short, safety should always come first, and even a small sunshade shouldn't be overlooked.
Was this review help?
3
1
Share
Expand All
More Forum Discussions

What is the fuel consumption of the Xingyue L?

The actual fuel consumption of the Xingyue L is 8.52L/100km. Here are some methods to reduce fuel consumption while driving: Enhance vehicle maintenance: Vehicle adjustments and maintenance affect engine performance and driving resistance. Owners should regularly visit auto repair shops for routine maintenance, such as checking tire pressure, wheel alignment, adjusting the gap between brake friction pads and brake drums, lubricating various points on the vehicle chassis, changing engine oil on schedule, and inspecting filters. Additionally, when selecting engine oil, choose the one with the lowest viscosity among the specified models in the manual, as higher viscosity increases friction and consequently fuel consumption. Avoid prolonged engine idling: Engine fuel consumption during idle parking is much higher than during normal driving. If the vehicle is not moving for a long time, such as when waiting for someone, it is best to turn off the engine. During cold starts, do not warm up the engine for more than 1 minute; maintaining low-speed driving for a few minutes is sufficient.
9
5
Share

What does full payment for the bare car mean?

Full payment for the bare car refers to the on-road price, which includes all costs such as vehicle insurance, purchase tax, license plate registration, etc. The total sum of these costs is the on-road price. More information about the full payment bare car price is as follows: Meaning of full payment bare car price: The full payment bare car price is similar in meaning to the bare car price, but the payment method differs, requiring full payment. The bare car price does not include additional costs such as purchase tax and insurance. Paying the full amount eliminates the need for installment payment procedures, avoids the requirement for GPS installation or renewal insurance deposits, and generally allows for cheaper insurance purchases. Calculation method for full payment bare car price: Bare car price = manufacturer's suggested retail price - discount amount.
12
0
Share

What are the effects of having too much coolant?

After adding too much coolant, it may cause excessive pressure in the coolant expansion tank. The introduction of automotive coolant and precautions when filling are as follows: Introduction: The full name is antifreeze coolant, meaning it is a coolant with antifreeze function. Coolant consists of three parts: water, antifreeze, and additives. According to the different components of antifreeze, it can be divided into alcohol type, glycerol type, ethylene glycol type, and other types of coolant. Precautions: Do not open the cap rashly when the radiator "boils." Do not spill water on the engine when adding water. Avoid human contact with antifreeze. Do not mix different types of antifreeze. Do not operate the engine without water. After the water inlet shows full, start the engine and let it run. When the engine temperature rises to the point where the thermostat opens, the air in the water jacket will be expelled, and the water level will drop. At this time, refill the radiator to full.
2
4
Share

Symptoms of a Faulty Common Rail Pressure Relief Valve?

Symptoms of a faulty fuel pump pressure relief valve include: the valve disc not reseating after discharge, primarily caused by a bent spring valve stem, improper installation of the valve disc, or it being stuck. Failure to open at the specified pressure: The reasons for this include inaccurate pressure setting; the valve disc sticking to the valve seat; the lever of a lever-type safety valve getting stuck or the counterweight being moved. Continued rise in pressure after discharge: This is mainly due to the selected safety valve having insufficient discharge capacity; misaligned valve stem centerline or a rusty spring preventing the valve disc from opening to the required height. Valve disc chattering or vibration: Primarily caused by excessive spring stiffness; improper adjustment of the adjusting ring; excessive discharge pipe resistance, leading to high discharge backpressure. Opening below the specified pressure: Mainly due to inaccurate pressure setting or aging spring reducing its elasticity.
7
1
Share

Why Should Right-Turning Vehicles Yield to Left-Turning Vehicles?

Due to the longer travel path of left-turning vehicles, if right-turning vehicles do not yield, left-turning vehicles would have to remain stationary in the middle of the intersection for an extended period, which would disrupt the normal flow of other vehicles. Therefore, for the sake of overall traffic efficiency, right-turning vehicles should yield to left-turning vehicles. Here are the relevant details: Right-turning and left-turning refer to vehicles moving in opposite directions, where one vehicle turns right and the other turns left, both entering the same intersection. In such cases, the right-turning vehicle must yield to the left-turning vehicle. The 'yield-to-the-right' principle means that when two vehicles approach an intersection simultaneously, the vehicle on the left must yield to the vehicle on the right. This is because, in countries where the driver's seat is on the left, the left 'A-pillar' is closer to the driver and obstructs a larger portion of the view, while the right 'A-pillar' is farther away and obstructs less. Thus, the left-side vehicle can more easily spot the right-side vehicle earlier, while the right-side vehicle is at a visual disadvantage and should therefore be given the right of way.
17
3
Share

Can I drive for Didi with a newly obtained driver's license?

You cannot drive for Didi with a newly obtained driver's license. Passing the driver's test only proves that you have passed the exam, but it does not mean you have mastered all driving skills. Driving skills need to be improved through continuous practice to achieve proficiency. For safety reasons, there is a one-year probation period for newly obtained driver's licenses. Additionally, Didi has requirements for drivers, including a minimum of three years of driving experience. Below are the basic requirements for Didi drivers: The car used for Didi must be less than six years old, in good condition, with a base price of at least 70,000 RMB, and a mileage of less than 100,000 kilometers. Male drivers must be between 22-60 years old, and female drivers must be between 22-50 years old, with good health. Didi offers different service types: premium cars require at least three years of driving experience, while standard cars require at least one year of driving experience. Applicants must provide verification of their ID card, driver's license, and vehicle registration certificate. A criminal record screening is required; those who fail the screening will not be approved. Traffic violation records and major accident screenings are also conducted. Applicants with 12 or more demerit points within one year or major traffic accidents within three years will not be approved.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.