The Function of Roof Racks?

Can a vehicle that has not been transferred undergo annual inspection?

A vehicle that has not been transferred can undergo annual inspection through a proxy. Before applying, the vehicle owner must resolve all traffic violations and accidents related to the vehicle. Required documents for the application include: an out-of-town annual inspection entrustment letter issued by the local vehicle management office, a completed application form, vehicle license, compulsory traffic accident liability insurance certificate, vehicle and vessel tax payment or exemption proof, and vehicle safety technical inspection certificate. The process is as follows: 1. After submitting the inspection application, the vehicle undergoes an online inspection. The vehicle enters the automatic inspection area to check exhaust emissions, speed, lights, side slip, and chassis for compliance with standards. All items must pass to proceed. 2. Exterior inspection verifies the vehicle's license plate, type, body color, engine number, VIN code, and frame number. The inspection includes checking the bumper, engine compartment, rearview mirrors, side mirrors, window glass, paint, engine operation, interior for passenger vehicles, and wheels. 3. The owner can obtain the inspection report and application form from the inspector. If all items pass, the owner can pay the inspection fee and receive the vehicle license and inspection label. If any items fail, the owner must repair the vehicle and undergo re-inspection until all items pass before proceeding with the visa process.

7

5

Share

Is CYS Color Change Film Domestic or Imported?

CYS color change film is domestic. Introduction to CYS color change film: CYS is a domestic brand of color change film, similar to ManCai color change film, both positioned as high-end and are among the top ten brands. Functions of color change film: It adds a protective layer to the car body, safeguarding the paint from sun, rain, and scratches from sand and stones. The color change film is applied to the car's paint surface, completely covering and isolating it from the external environment, protecting the paint from corrosion by acid rain, UV rays, bird droppings, and tree resin, as well as preventing scratches and wear from pebbles and dust. It preserves the original paint color and gloss, slows down aging, keeps the car looking new for longer, and maintains its value. Under the cover of the color change film, the car body is fully protected from external damage. After several years, when the film is removed, the original paint remains as bright and new as ever, making it an excellent choice for maintaining car value. It eliminates the need for waxing, sealing, or coating; simple cleaning is sufficient for long-term maintenance. After applying the color change film, frequent expenses on waxing and sealing are no longer necessary. If the original paint is already damaged, the color change film can cover it up. For accidental damage to the original factory paint, there's no need for polishing or repainting; simply cover it with the color change film to perfectly conceal the flaw, giving the damaged car a fresh new look.

17

0

Share

How to Adjust the Headlights of Geely New Vision?

Geely New Vision adjusts the headlights through the knob at the rear of the headlight assembly, allowing owners to adjust the lights themselves with tools. Lift the engine hood, locate the adjustment knob at the rear of the headlight assembly, and use the appropriate tool to adjust. Before adjusting, determine whether the knob adjusts left-right or up-down. The steps for adjusting the headlights of Geely New Vision are as follows: 1. Choose a dim environment: such as an underground parking lot or at night, park the car facing a wall, aligning the front of the car as straight as possible with the wall, about 5 to 6 meters apart; 2. Turn on the headlights, cover one headlight with an opaque thick cloth, and adjust each headlight separately. To ensure the headlight beam position is at the normal driving position, it's best not to leave the vehicle unloaded; you can have a friend sit in the driver's seat; 3. Use a marker or chalk to mark the center of the headlight's illumination range on the wall, and also make a mark on the wall corresponding to the car emblem (the center of the front). Measure the distance between the marks of the two headlights and the center position; the two distances should be equal. Note: If there is a phenomenon of outward or inward deviation, refer to the vehicle's user manual and use a screwdriver for fine adjustments to ensure the two headlights are symmetrically positioned left and right; 4. Adjust the height of the beam. The right headlight should be completely level and straight, while the left headlight should be adjusted upward by about 10cm, but not too high to avoid shining directly into the eyes of oncoming drivers. Note: The illumination range of the right headlight can be slightly biased to the right to improve visibility on the right side of the vehicle.

19

2

Share

How to Perform a Handbrake Start?

Handbrake Start: 1. Manual Transmission: Pull the handbrake tight, then shift into 1st gear. Slowly lift the clutch pedal with your left foot until you feel the car has a forward momentum, then release the handbrake. Continue to slowly lift the clutch pedal while gradually pressing the accelerator pedal with your right foot. 2. Automatic Transmission: Shift into D gear, gradually press the accelerator pedal with your right foot until you feel the car has a forward momentum, then release the handbrake. More details are as follows: 1. When starting on a slope, you should pull the handbrake tight to prevent the car from rolling backward. When starting a manual transmission car, you should use the half-clutch technique. 2. When starting a manual transmission car, first shift into 1st gear, then slowly lift the clutch pedal with your left foot. Once the clutch reaches the engagement point, pause briefly, then continue to slowly lift the clutch pedal while gradually pressing the accelerator pedal with your right foot to prevent the engine from stalling. 3. When starting a manual transmission car, the speed difference between the engine flywheel and the clutch plate is too large. If the clutch pedal is released abruptly, it will cause the engine to stall. The half-clutch technique can gradually reduce the speed difference between the engine flywheel and the clutch plate. However, when using the half-clutch technique, you must also control the time properly to avoid accelerating the wear of the clutch plate.

16

0

Share

What does the exclamation mark on the Magotan speedometer mean?

There are five possible scenarios when an exclamation mark appears on the car dashboard: general malfunction, automatic transmission failure, brake system failure, abnormal tire pressure, and lighting malfunction. Below is a detailed analysis of these five situations: General Malfunction: A triangle with an exclamation mark inside indicates a general performance or component/function failure in the vehicle. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is necessary to visit a 4S shop for inspection to identify the source of the problem. Automatic Transmission Failure: A yellow gear with an exclamation mark inside is the automatic transmission warning light, indicating a transmission malfunction or low transmission fluid level. Transmission fluid should be replaced promptly. Brake System Failure: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, typically signaling brake system failure or low brake fluid level. Immediate inspection of the brake system is required to avoid accidents. Abnormal Tire Pressure: A horizontal line with parentheses below and an exclamation mark in the middle is the tire pressure monitoring warning light. This light illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Malfunction: A yellow bulb with an exclamation mark is the lighting malfunction indicator, signaling a fault in one of the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue.

6

0

Share

Why is the Cadillac XTS horn not working?

Cadillac XTS horn not working requires first distinguishing whether it is a wiring fault or a problem with the horn itself. Wiring faults typically include: burnt contacts on the horn relay, loose horn plug terminals, poor contact at the steering wheel horn switch. Horn faults include: burnt contacts, poor sealing making it prone to moisture, poor contact at the electromagnetic coil terminals. The Cadillac XTS is a model under the Cadillac brand, with body dimensions of 5131mm in length, 1852mm in width, and 1501mm in height, and a wheelbase of 2837mm. In terms of interior, the Cadillac XTS continues Cadillac's tradition of high-end materials, with the dashboard, door panels, and steering wheel wrapped in large amounts of genuine leather and accented with real wood. Chrome trim is used on the air vents, door handles, and seat backs to enhance the vehicle's visual premium feel.

1

3

Share

The Function of Roof Racks?

Can a vehicle that has not been transferred undergo annual inspection?

Is CYS Color Change Film Domestic or Imported?

How to Adjust the Headlights of Geely New Vision?

How to Perform a Handbrake Start?

What does the exclamation mark on the Magotan speedometer mean?

Why is the Cadillac XTS horn not working?

What are the dimensions of the Volkswagen Tayron?

How many generations of Audi A6 are there?

How to Replace the Battery in a Hyundai Elantra Key Fob?

How to Adjust Rearview Mirrors Best?