The Correct Method for Starting and Parking an Automatic Transmission Vehicle

2 Answers
DiMiranda
07/28/25 9:15pm
Here is the correct method for starting an automatic transmission vehicle: 1. Before getting in the car, observe the surroundings to ensure safety, then enter the vehicle, sit down, and fasten the seat belt. 2. Next, press the brake pedal with your right foot and use your right index finger to press the 'one-touch start' button (ensure the gear is in P position from the previous parking). At this point, the car's engine will start. 3. Then shift to D gear or R gear (use R gear when reversing is needed, otherwise shift directly to D gear to move forward). 4. Finally, release the handbrake (keep your right foot on the brake pedal until this step): If you need to move forward and have already shifted to D gear, move your right foot to the accelerator pedal and gently press to move forward. If you need to reverse, gently lift your right foot to release the brake (but keep it ready on the brake pedal), reverse to the desired position, firmly press the brake, shift to D gear, move your right foot to the accelerator, and gently press to move forward. Here is the correct method for parking an automatic transmission vehicle: 1. After parking in the garage or parking space. 2. With your right foot on the brake pedal, shift from R gear or D gear to N gear. 3. Then engage the handbrake, turn off the engine, and shift to P gear. 4. Lift your right foot, release the seat belt, and open the door. 5. Exit the vehicle, lock the doors with the remote key, and leave (remember to turn off the headlights at night before exiting).
Was this review help?
9
4
Share
StellaAnn
08/12/25 1:55am
I think starting an automatic transmission car is quite simple: First, after getting in the car, firmly press the brake pedal, confirm that the gear is in P or N, and turn the key to start the engine. Wait until the engine stabilizes, then shift to D gear, slowly release the brake, lightly press the accelerator to move the car, and don't rush the start. When parking, pay even more attention to safety: bring the car to a complete stop, keep pressing the brake, first shift into P gear, then engage the handbrake or press the electronic button, and finally turn off the engine. I've been driving for over ten years and have seen cases where people didn't engage the handbrake on a slope and directly shifted to P gear, resulting in the transmission getting stuck and needing repairs, costing unnecessary money. When starting a cold engine, let it warm up for a few seconds before moving to protect the engine's lifespan. At busy intersections or during rainy days, ensure the correct operation sequence to avoid slipping or rear-end collisions—safety first for a smooth journey. Once you develop these habits, the car will be durable and hassle-free.
Was this review help?
19
3
Share
Expand All
More Forum Discussions

What type of vehicle is the Orlando positioned as?

The Orlando is positioned as a compact car, equipped with a 1.3T turbocharged engine that delivers a maximum power of 120 kW and a peak torque of 230 Nm. In terms of the transmission system, the 1.3T turbocharged engine is paired with a 6-speed automatic manual transmission. The Orlando's body dimensions are 4684 mm in length, 1807 mm in width, and 1628 mm in height, with a wheelbase of 2796 mm. The Orlando features front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension, and its body structure is a unibody design.
20
1
Share

Can scratches on car glass be repaired?

Scratches on car glass can be repaired. The repair methods are: small and shallow scratches can be treated with toothpaste. Applying toothpaste can repair minor scratches and prevent rust. First, wipe the area with a soft cloth, then rinse it with water to ensure there are no debris or impurities on the glass. Next, apply toothpaste to the glass and inspect the scratched area to check the effect until the scratches are no longer visible. Alternatively, you can use a glass scratch repair agent, which is only suitable for minor scratches. During the repair process, it is important to clean and wipe the area to be repaired thoroughly to avoid any residual impurities on the surface.
16
0
Share

What are the benefits of engine start-stop?

Engine start-stop benefits include energy conservation and emission reduction. When the engine start-stop function is activated, the engine enters a temporary dormant state, eliminating the issue of instantaneous fuel consumption and saving fuel. The working principle of the engine start-stop system is that when the vehicle stops moving due to traffic congestion or at an intersection, the driver presses the brake pedal, stops, and shifts into neutral, at which point the system automatically detects the conditions. Generally, the automatic start-stop technology is enabled by default after the ignition is turned on. If it needs to be turned off, a simple press of a button is sufficient. When in use, it is more convenient. During driving, as long as the brake pedal is pressed and the vehicle comes to a complete stop for two seconds, the engine will automatically shut off. If the brake remains pressed, the engine will stay off.
1
5
Share

What Causes the Volkswagen Magotan to Burn Coolant?

Below are the reasons why the Volkswagen Magotan burns coolant: 1. Radiator damage: Poor sealing of the upper and lower water chambers causes coolant leakage. Regular inspections of all seals and connections are necessary. 2. Loose pipe fittings: Loose fittings on the overflow tank, water pump joint surfaces, and various cooling system pipelines result in poor sealing and coolant leakage. 3. Cylinder failure: Damaged cylinder gaskets, excessive flatness deviation or warping of the cylinder head and cylinder block joint surfaces, and loose cylinder head fastening bolts allow high-temperature, high-pressure gas from the cylinders to enter the cooling system, leading to rapid coolant consumption.
3
1
Share

Can Novice Drivers Drive on Highways?

Novice drivers can drive on highways, but they need to pay attention to maintaining a safe distance from other vehicles. When changing lanes, they must signal in advance and be mindful of various roadside signs and warnings. They should avoid fatigued driving and always adhere to the speed limits. Many drivers tend to drive while fatigued, especially on long journeys. When approaching tunnels on highways, drivers should pay attention to the warning signs, which usually indicate the need to turn on headlights. If encountering a situation where vehicles ahead are slowing down or traffic is congested, drivers should slow down accordingly while also checking their rearview mirrors to avoid rear-end collisions. It's important to maintain a safe distance from the vehicle in front before coming to a complete stop.
7
1
Share

Do Spark Plugs Need Cleaning?

Spark plugs need cleaning: 1. White vinegar cleaning: Place the spark plug in a glass container, pour in white vinegar, soak for a few hours, then scrub with a stiff toothbrush to remove all carbon deposits, and let it air dry naturally; 2. Use carburetor cleaner: Place the spark plug head down in a glass bottle, soak it with carburetor cleaner, wait for about half an hour, then remove it from the bottle, spray with carburetor cleaner while scrubbing with a toothbrush, and let it dry; 3. Use blue toilet cleaner: Soak the spark plug ignition electrode directly in pure toilet cleaner, place it in a ventilated environment for about 10 minutes, remove it when the bubbles gradually decrease, rinse with white vinegar, and let it air dry naturally.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.