···
Log in / Register

The Actual Fuel Consumption of the Lynk & Co 01 Model

4 Answers
DiLila
07/29/25 9:35pm

The new Lingpai has a fuel consumption of approximately 6.8 liters per 100 kilometers. Here is more information about the new Lingpai: 1. Engine: The Lingpai is a compact sedan under Honda, equipped with a 1.0-liter three-cylinder turbocharged engine. This engine delivers 122 horsepower and a maximum torque of 173 Nm, reaching its maximum power output at 5,500 rpm and its maximum torque between 2,000 and 4,500 rpm. The engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. 2. Transmission: The engine is paired with either a 6-speed manual transmission or a CVT. 3. Suspension: The Lingpai uses a MacPherson independent suspension at the front and a torsion beam non-independent suspension at the rear, which is common for compact sedans.

Was this review help?
6
5
Share
SanAnna
08/15/25 8:38pm

I've been driving the Lynk & Co 01 for almost two years now, and the real fuel consumption is quite affected by driving habits. In city traffic jams, it can reach over 10 liters per 100 kilometers, while on the highway it drops to around 7.5 to 8 liters. I drive relatively smoothly, without sudden acceleration or braking, so my average is about 9 liters. It's important to note that insufficient tire pressure, heavy use of air conditioning, or a loaded trunk can all cause fuel consumption to spike. Regular maintenance, such as changing the engine oil, can help. Overall, as an SUV, it's not particularly fuel-efficient, but it has strong power and is average among similar vehicles. If you frequently drive on highways, the fuel consumption performance will be much better.

Was this review help?
6
0
Share
Expand All
DeAlivia
10/17/25 4:33am

From a technical perspective, the fuel consumption of the Lynk & Co 01 is noteworthy. It is mostly equipped with turbocharged engines, with an urban combined fuel consumption of approximately 9 to 11 liters per 100 kilometers, while on highways, it can drop to just over 7 liters. The engine efficiency is commendable, but factors like aerodynamic drag and vehicle weight add to the load, affecting real-world performance. I recommend paying attention to maintenance details, such as a dirty air filter causing insufficient air intake, which naturally leads to increased fuel consumption. Over time, without proper maintenance, fuel efficiency tends to deteriorate. Overall, the data is reliable, but real-world driving typically results in 1-2 liters higher consumption than the official claims, which is within a reasonable range for SUVs.

Was this review help?
14
2
Share
Expand All
StLucas
11/30/25 5:16am

I'm quite concerned about environmental protection, and the fuel consumption of the Lynk & Co 01 directly affects carbon emissions. In the city, it's usually over 9 liters per 100 kilometers, leading to increased emissions, especially during traffic jams. If you opt for the hybrid version, the actual fuel consumption can drop to around 5 liters, significantly reducing environmental pressure. I often encourage slow acceleration and gentle throttle use to save energy, as high fuel consumption not only costs more but also pollutes the air. In its class, the Lynk & Co 01's fuel consumption performance is above average, but actively improving driving habits can enhance sustainability.

Was this review help?
18
5
Share
Expand All
More Forum Discussions

How much does an 18-liter barrel of engine oil weigh?

A barrel of 18-liter engine oil equals approximately 32.76 Chinese pounds. Here is some extended information about automotive engine oil: Grade Introduction: 'S' indicates suitability for gasoline engines, with 'N' being the highest grade for gasoline engine oil. 'C' denotes suitability for diesel engines, and 'F' represents the highest grade for diesel engine oil. Oil Introduction: Engine oil, also known as engine lubricant (English name: Engine-oil), has a density of approximately 0.91×10³ (kg/m³). It serves multiple functions in an engine, including lubrication and wear reduction, auxiliary cooling, sealing and leakage prevention, rust and corrosion protection, as well as shock absorption. Often referred to as the 'blood' of a car, engine oil consists of two main components: base oil and additives. The base oil is the primary constituent of lubricants, determining their fundamental properties, while additives compensate for and enhance the performance shortcomings of the base oil, imparting new characteristics, making them a crucial part of lubricants.
13
2
Share

Is N the Reverse Gear?

N is not the reverse gear. Here is more information about the N gear: Definition: The N gear is one of the three standard gears in automatic transmission models, located between the R gear and D gear on the gearshift console. Its essence is the neutral gear in the transmission. Function: Its purpose is to cut off the power transmission between the input shaft and output shaft inside the transmission. Precautions: Automatic transmission vehicles should not coast in neutral under non-special circumstances, as it is not only unsafe but can also damage the transmission due to insufficient lubrication of gears and other parts caused by the transmission oil pump's inadequate oil supply. Additionally, the N gear is a pure neutral gear without a braking mechanism, requiring the use of the parking brake or brake pedal to park; otherwise, the vehicle may roll on uneven surfaces.
1
5
Share

Can any vehicle management office cancel an appointment?

No, cancellation of a driving test requires an application at the local vehicle management office where the test was scheduled. Below is relevant information about vehicle management offices: Definition: A vehicle management office is a direct institution under the public security system, primarily responsible for handling motor vehicle registration, modification, transfer, mortgage, and cancellation of registration. These offices are generally established at the county level or higher administrative regions. Position Supervision: Each motor vehicle and driver's license service position in a vehicle management office has the obligation to supervise the work of the previous position. If any issues are found, such as questionable procedures handed over from the previous position, violations in handling services, or non-standard filling of certificates and forms, or failure to sign and stamp as required, they should be reported to the supervisory position. The supervisory position should immediately investigate and handle the matter, and maintain a record of the handling process.
9
2
Share

What is the lifespan of the GW250 engine?

With proper maintenance and correct usage, this engine can last up to 150,000 kilometers without issues. Below is relevant information about the GW250: Introduction to GW250: The Lishui GW250 produced by Suzuki in 2011. It features a four-stroke in-line twin-cylinder liquid-cooled engine with an actual displacement of 248ml and a maximum torque of 22Nm/6500rpm. The vehicle weight with a full tank of gasoline is 183kg. GW250 specifications: Emission standard - China III, transmission - 6-speed, minimum ground clearance - 165mm, wheelbase - 1430mm, curb weight (kg) - 172, gross vehicle weight (kg) - 183, fuel tank capacity (L) - 13, top speed (km/h) - 123, number of wheels - 2, wheel type - cast aluminum, braking system - front and rear, suspension system - front and rear, travel characteristics - front and rear.
9
0
Share

Why can't the tricycle shift gears?

It may be due to slippage in the hydraulic-operated clutch. Below is relevant information about vehicle gear shifting: Precautions: When downshifting, use the method of double-clutching with a blip of the throttle. The principle of downshifting with a throttle blip is: the faster the speed, the larger the "throttle blip"; the slower the speed, the smaller the "throttle blip"; at low engine speeds, the "throttle blip" should be larger; at high engine speeds, the "throttle blip" should be smaller; on flat roads, the "throttle blip" should be larger; when going uphill, the "throttle blip" should be smaller. Techniques: Gear shifting should be timely, accurate, smooth, and swift. When starting the vehicle, generally use the low gear (first gear). After starting, as long as road conditions permit, quickly and promptly shift up to higher gears.
11
3
Share

Should You Turn Off the Air Conditioner When Exiting the Car?

When the car's air conditioner is not in use, whether you are exiting the vehicle or remaining inside, it is essential to turn it off promptly. Below is an introduction to automotive air conditioning systems: Air Conditioning Layout: Different types of air conditioning systems have varying layouts. Currently, most passenger cars widely adopt integrated heating and cooling air conditioning systems. The layout typically involves assembling components such as the evaporator, heater core, centrifugal blower, and control mechanisms into a single unit, referred to as the air conditioning assembly. Air Conditioning Components: Modern air conditioning systems consist of a refrigeration system, heating system, ventilation and air purification devices, and a control system. Automotive air conditioning systems generally include components such as the compressor, electronically controlled clutch, condenser, evaporator, expansion valve, receiver-drier, piping, condenser fan, vacuum solenoid valve, idle speed controller, and control system. The automotive air conditioning system is divided into high-pressure and low-pressure lines. The high-pressure side includes the compressor output side, high-pressure lines, condenser, receiver-drier, and liquid lines; the low-pressure side includes the evaporator, accumulator, suction lines, compressor input side, and compressor oil sump.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.