···
Log in / Register

Subject 1 afternoon session reservation didn't specify the time?

3 Answers
MacKira
07/29/25 7:37pm
There is no time limit for the afternoon exam of Subject 1, and the latest exam session will end before 6 o'clock. If you make an afternoon reservation, try to arrive at the test center around 1 to 2 o'clock. The following is the specific introduction about Subject 1: 1. Brief description: Subject 1 refers to the driver's theory test, which is conducted at the vehicle management office. It is a mandatory licensing test for license applicants. The test content includes the most basic knowledge such as driving theory foundation, road safety laws and regulations, traffic signals, traffic rules, plus local regulations. 2. Notes: There is no limit to the number of reservations for the Subject 1 exam. It is recommended to review the question bank more to ensure passing at once.
Was this review help?
3
2
Share
LucyLee
08/14/25 2:47pm
I remember last time I took the Subject 1 test, I also chose the afternoon session. At that time, no specific time was displayed, which left me a bit puzzled. Later, I checked through the DMV app and found that a confirmation text message would be sent a day or two after the appointment. It turned out my test started at 2 PM. Arrangements vary greatly by region—here, afternoon sessions cover between 1 PM and 5 PM, with staggered entry times to save resources. I recommend refreshing the booking platform now or calling the DMV directly to confirm, to avoid being late on the day and missing your chance. Also, don’t forget to bring your ID on exam day, and arriving half an hour early is a safe bet. This process is a common practice for managing examinee flow, so no need to worry too much, but proactively following up is the safest approach.
Was this review help?
2
5
Share
Expand All
CooperLynn
10/15/25 6:20am
In my experience with the vehicle management system, it's common for the subject one test to have time slots divided into sessions. The afternoon session might be a broad range, say 13:00-17:00, with the exact time to be notified by the system later. This is because test centers need to dynamically arrange schedules based on the number of applicants to avoid overcrowding. I suggest you check for updates on the original booking website, and if nothing is shown, call the local vehicle management office for details—the number is usually listed on their official website. This design is quite reasonable as it allows for more efficient resource allocation, but don't just wait passively for the notification. Bringing valid documents and arriving on time is crucial, as punctuality is a fundamental safety habit in driving culture. Understanding local rules better will help you pass smoothly.
Was this review help?
15
3
Share
Expand All
More Forum Discussions

Does the Wuling Hongguang Mini have one or two reverse lights?

Wuling Hongguang Mini has one reverse light. Relevant information is as follows: 1. Note: When reversing, always check for pedestrians or electric vehicles behind you. Always reverse slowly to minimize potential hazards in case of accidents. 2. Turning around: When making a U-turn on wider roads, you can directly judge the position of the rear or wheels on the road through the rearview mirror. On narrower roads, if you cannot accurately determine the position of the rear and rear wheels from the rearview mirror, you can open the door and observe the rear wheels while operating. When making a U-turn at intersections or street corners, expand your view and range of the rear, pay attention to the movement of passing vehicles, pedestrians, and bicycles, and reverse carefully.
14
5
Share

Does replacing the oil temperature sensor require removing the transmission?

Replacing the oil temperature sensor does require removing the transmission. The transmission oil temperature sensor is installed on the valve plate inside the transmission oil pan. Its main function is to detect the temperature of the automatic transmission hydraulic oil. When removing the transmission, be careful not to pull hard on the wiring harness on the valve plate. The testing method for the oil temperature sensor is as follows: 1. Measure the resistance value of the oil temperature sensor: Remove the transmission oil temperature sensor, place the sensor in a beaker filled with water, heat the water in the beaker, and measure the resistance between the two terminals of the sensor at different temperatures. 2. Standard resistance value for the sensor: Compare the measured resistance value with the specified value. If the resistance value differs significantly from the specified value, it should be replaced.
8
4
Share

How often should the CVT transmission fluid be changed in the Nissan Qashqai?

Nissan Qashqai CVT transmission fluid generally needs to be replaced every 80,000 to 100,000 kilometers or every 5 to 6 years. Symptoms of deteriorated transmission fluid in the Nissan Qashqai: 1. Slipping: The engine speed increases, and slipping occurs under high-torque conditions such as uphill driving. 2. Oil leakage: Poor sealing of the transmission, possibly due to issues with gaskets or seals. 3. Jerking: The main cause may be deteriorated transmission fluid containing dirt or impurities. 4. Abnormal noises: Excessive debris or impurities in the transmission fluid. 5. Overheating: The dashboard will display a transmission fault warning light. 6. Stalling: The engine stalls when shifting from P to D gear. Possible failures include the solenoid valve, lock-up control valve, or input shaft speed sensor.
4
3
Share

Where to Get a Car Natural Gas Tank Inspection?

Local Special Equipment Inspection and Research Institute (Special Inspection Institute) gas tank inspection stations conduct cylinder inspections. Here are the relevant details: 1. Material Proof: For inspection, you need to bring the gas tank usage registration certificate from the oil-to-gas conversion, the gas tank factory qualification certificate, the gas tank installation supervision inspection certificate, the vehicle's driving license, and the owner's ID card to the Special Inspection Institute for inspection. For details, you can inquire by calling the local Special Inspection Institute. 2. Pressure Equipment: A gas tank is a type of pressure equipment with explosion hazards, and its contained medium is generally flammable, explosive, toxic, highly corrosive, etc. Its usage environment, due to characteristics like mobility, repeated refilling, non-fixed operators, and changing usage conditions, makes it more complex and harsh compared to other pressure vessels.
15
1
Share

How to Release the Audi Handbrake?

Audi electronic handbrake can be released by simply pressing down the electronic handbrake switch. Below is the related introduction: 1. Working Principle: The electronic handbrake is a technology that achieves parking braking through electronic control. Its working principle is the same as that of the manual mechanical parking brake system, which realizes parking by clamping the friction between the brake shoes and the brake drum or between the friction pads and the brake disc. However, the control method is replaced by electronic buttons and motor actions instead of the original manual operation. Therefore, the full name of this system is the electronically controlled mechanical parking brake system. 2. Advantages: The advantages of the electronic parking brake system are that the parking brake handle is eliminated in the cabin, providing more design space for the overall interior styling. The parking brake is replaced by a button instead of the driver's effort to pull the parking brake handle, which is simple and labor-saving, reducing the operation intensity of the driver, especially female drivers.
17
3
Share

Where is the engine number located on a Volvo XC60?

Volvo XC60's engine number is located on the engine block. It typically consists of a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be checked through the following 4 ways: The vehicle's driving license contains the engine number, usually printed on the second-to-last line; The motor vehicle registration certificate will state the engine number; The car purchase invoice will indicate the engine number; The vehicle purchase tax payment certificate will also state the engine number. It's important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's range, and engine models can be the same. The engine number, however, refers to the production serial number of the engine. Each engine can only have one unique engine number, and no two engines share the same number.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.