Strong Jerking Sensation When Shifting from Second to Third Gear in Automatic Transmission

Where is the Low Beam Switch Located?

The low beam switch of a car is located on the control lever on the lower left side of the steering wheel. Below are the usage methods and precautions for low beams: 1. Driving sections: When driving in areas without streetlights at night, or during dusk when it's darker or at dawn when light first appears, the low beams must be turned on. 2. Special weather conditions: In case of heavy fog, snow, or heavy rain where visibility is obstructed, the low beams must be turned on even during the day. 3. Insufficient brightness: On some roads where there are lighting facilities but the brightness is inadequate, the low beams should also be turned on. When driving on urban roads, do not use high beams as they can affect the normal driving of oncoming vehicles.

17

3

Share

What season is 15w50 engine oil used in?

15w50 engine oil is used in summer. Here are the specific details about motor vehicle engine oil: 1. Introduction: Engine oil serves functions such as lubrication, cleaning, cooling, sealing, and friction reduction for the engine. It can be roughly categorized into three types: mineral oil, semi-synthetic oil, and fully synthetic oil. Generally, fully synthetic oil has a longer replacement interval, a wider temperature range, and is less volatile compared to semi-synthetic or mineral oil. 2. Maintenance: Change the engine oil every 5000 kilometers, replace the engine oil and clean the carburetor every 15000 kilometers, inspect and clean the air filter, replace the gear oil, adjust the valves every 30000 kilometers, replace the engine oil and gear oil, clean the carburetor, replace the air filter, after the break-in period, clean the carburetor every 2000 kilometers, replace the filter and engine oil, and the gear oil can be replaced every 3000 kilometers.

2

3

Share

Why does the car air conditioning system show no leakage during pressure testing?

No leakage during pressurization is due to insufficient precision in detecting leaks when high-pressure gas is charged into the air conditioning system. Here are the relevant explanations: 1. Check the high-pressure valve core: Because low-pressure evacuation is generally used. Press the high-pressure valve with your finger to see if there is a suction sensation. If no issue is confirmed, then the only remaining possibility is leakage from the compressor oil seal. Given the current environmental standards, the structure of compressor oil seals should be understood. Therefore, there may be no leakage during pressure testing, but leakage can occur during evacuation. 2. Car air conditioning: It is used to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car compartment to the optimal state, providing a comfortable riding environment for passengers and reducing travel fatigue; it creates good working conditions for the driver and plays an important role in ensuring safe driving. It generally includes refrigeration devices, heating devices, and ventilation devices.

9

0

Share

Is talking to oneself during the Subject 3 driving test considered a violation?

Subject 3 driving test does not consider talking to oneself as a violation, but it is advisable to avoid doing so. The content of the Subject 3 driving test is as follows: 1. Introduction: Subject 3, which includes the road driving skills test and the safety and civilized driving knowledge test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safety and civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies for different types of vehicles. 2. Road driving skills test content: The road driving skills test for Subject 3 generally includes: preparation before starting, light simulation test, starting, driving in a straight line, gear shifting operations, changing lanes, pulling over, driving straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and driving at night.

6

1

Share

What is the urban fuel consumption of the Passat 330?

The combined fuel consumption of the Passat 330 is 6.3L/100km. There are currently 6 models of the Passat 330 on sale: Elite Edition, Starlight Elite Edition, Luxury Edition, Starlight Luxury Edition, Starlight Premium Edition, and Premium Edition, all with a combined fuel consumption of 6.3L/100km. The above figures are NEDC combined fuel consumption, which is the data measured under the NEDC test procedure for comprehensive driving conditions. The actual fuel consumption is higher than this value, ranging from 8.0-9.1L/100km. The level of a car's fuel consumption is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before reaching a red light, will increase fuel consumption. The car itself: Cars with larger displacements consume more fuel than those with smaller displacements because larger displacements generally mean higher power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily during cold starts, requiring more gasoline to burn, which increases fuel consumption. Additionally, in low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.

18

3

Share

How to Add a Motorcycle License with an Existing C1 Driver's License?

You need to submit an application by filling out the "Motor Vehicle Driver's License Application Form," providing proof of identity, physical condition, and your current C1 driver's license. Apply for the additional license at the vehicle management office where your C1 license was issued. Below are the relevant details for adding a motorcycle license: 1. Prerequisite: Those who have just obtained one type of driver's license can only take the test for another type of license after one year. During the application and examination process for the additional license, you must bring your ID card and the previously obtained driver's license. Those who pass the test can add the license; 2. Notes: To add a motorcycle license, you must have a local household registration where you intend to add the license, and the issuing authority of your driver's license must also be local. If you do not have a local household registration or a local driver's license relationship, the application will not be processed, and you must transfer the relationship. All types of driver's licenses require the completion of the probationary period before adding another license.

15

3

Share

Strong Jerking Sensation When Shifting from Second to Third Gear in Automatic Transmission

Where is the Low Beam Switch Located?

What season is 15w50 engine oil used in?

Why does the car air conditioning system show no leakage during pressure testing?

Is talking to oneself during the Subject 3 driving test considered a violation?

What is the urban fuel consumption of the Passat 330?

How to Add a Motorcycle License with an Existing C1 Driver's License?

What are the time requirements for the Subject 2 test items?

Should I replace the tire if there is a cut on it?

How to Open a Locked Urea Tank Cap?

How Much Does Using Air Conditioning Affect Fuel Consumption?