Steps to Turn Off the Car with the Key

1 Answers
LaHailey
07/29/25 11:24pm
Steps to turn off the car with the key: After the vehicle comes to a complete stop, shift to neutral, engage the parking brake, release the clutch and brake pedals, reset the lights, and turn the key to the OFF position. Generally, turning the key counterclockwise once shuts off the engine, while turning it twice cuts off all power. Here are the correct steps to park and turn off an automatic transmission vehicle: 1. Press the brake pedal to ensure the vehicle is stationary and shift the gear to N (Neutral); 2. Engage the parking brake; 3. Shift to P (Park) and release the brake; 4. Turn off any unnecessary electrical devices in the car; 5. Verify that the gear is in P (Park), all unnecessary electrical devices are turned off, and the steering wheel is straightened; 6. Rotate the key counterclockwise to the end, or press the push-button start once to set the ignition switch to the OFF position.
Was this review help?
14
3
Share
More Forum Discussions

How to use the cruise control on the BMW 320?

To use the cruise control on the BMW 320: 1. Increase the vehicle speed to above 40 km/h, then press the 'set' button to lock in the current speed; 2. You can press the 'res+' or 'set-' buttons to fine-tune the speed to reach the desired cruising speed; 3. The cruise control indicator light will illuminate on the dashboard, displaying the set cruising speed; 4. To cancel the cruise control, simply press the brake pedal or the cancel button. Taking the 2021 BMW 320 as an example, it belongs to the mid-size sedan category with body dimensions of 4719mm in length, 1827mm in width, and 1459mm in height, a wheelbase of 2851mm, front and rear track widths of 1506mm, a fuel tank capacity of 63 liters, a trunk capacity of 460 liters, and a curb weight of 1465kg.
17
1
Share

How to Distinguish Between Dry and Wet DCT?

DCT refers to the Dual Clutch Transmission, which is called 'Dual Clutch Transmission' because it has two sets of clutches. According to the structure, it can be divided into dry type and wet type. The following are the methods to distinguish between dry and wet DCT: 1. Whether the clutch plates of the transmission are immersed in the transmission oil: the clutch plates of the dry dual clutch are not immersed in the transmission oil; the clutch plates of the wet dual clutch are immersed in the transmission oil. 2. The connection medium between the driving plate and the driven plate in the clutch is different: the connection medium of the dry dual clutch is air; the connection medium of the wet dual clutch is oil. 3. Different usage situations: generally, the dry type is used in a short-time semi-clutch state; the wet type is mostly used in automatic transmissions, such as the currently commonly used manual-automatic integrated transmission.
5
3
Share

Should the Windshield Be Repaired or Replaced When Hit by a Stone?

If the windshield is cracked by a stone, whether to repair or replace it depends on the length of the crack. You can use a one-yuan coin as a measuring tool—if the crack can be covered by the coin, it can be repaired; if the crack exceeds the size of the coin, replacement is necessary. Below is an introduction to windshield repair: 1. Location: Cracks in the middle of the windshield are relatively easier to repair compared to those at the edges. 2. Time: Repair is easier if done immediately after the crack occurs. However, if left for too long, the crack may expand, affecting the repair quality, and the glass may become harder to clean thoroughly, significantly reducing the repair effectiveness.
18
4
Share

Can a new car directly get official license plates?

New cars can directly obtain official license plates, but there is a waiting period from number selection to plate production and issuance. Before receiving the metal license plates, the vehicle management office will provide the owner with a paper-printed temporary license plate. After completing the number selection, staff will print out the vehicle plate collection certificate and require the owner to make payment. Following payment, after a waiting period, the vehicle registration certificate and license can be obtained. Temporary license plates are valid for 5 to 15 days, with a maximum duration not exceeding 30 days. These are provisional vehicle operation certificates issued by public security vehicle management departments, featuring time limits and regional restrictions. There are four types in total. Official license plates have long-term validity, essentially lasting the vehicle's lifetime. Official plates are installed using anti-theft fasteners at designated front/rear positions, while temporary plates must be affixed to the interior of front/rear windshields as regulated.
10
2
Share

What Are the Pedals in a Car?

The pedals in a car are used to control the vehicle. A manual transmission car has three pedals: the clutch pedal, the brake pedal, and the accelerator pedal. An automatic transmission car only has two pedals: the brake pedal and the accelerator pedal. Clutch Pedal: The clutch pedal is the control device for the clutch assembly in a manual transmission car. Through proper operation by the driver, it engages and disengages the front and rear parts of the clutch, achieving the purposes of starting, shifting gears, and reversing. Brake Pedal: The brake pedal is primarily used to control the speed of the car and to bring it to a stop. Accelerator Pedal: The accelerator pedal is part of the car's fuel supply system and is used to control the engine's speed. When pressing or releasing the accelerator pedal, it is necessary to control the force, ensuring a gentle press and slow release. During driving, sudden acceleration should be avoided as much as possible.
8
1
Share

What kind of light is the headlamp?

The headlamp refers to the lighting device installed on both sides of the front of a car, used for illuminating the road during nighttime driving. There are two types: two-lamp system and four-lamp system. The illumination effect of headlamps directly affects nighttime driving operations and traffic safety. Therefore, traffic management departments worldwide generally stipulate the illumination standards for automotive headlamps by law to ensure safety during nighttime driving. Additional information is as follows: 1. Classification: The optical system of a headlamp is a combination of a bulb, reflector, and light distribution lens. Based on the structure of the headlamp's optical system, headlamps can be divided into three types: semi-enclosed, enclosed, and projection. 2. Structure: Automotive headlamps generally consist of three parts: the bulb, reflector, and light distribution lens (diffuser).
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.