Steps for Removing the Middle Row Seats in a Mercedes-Benz V260
3 Answers
On both sides of the middle row seat headrests, there are handles. Pulling these handles allows the seat back to fold forward. After folding, you can see the screws that need to be removed to detach the seat. The Mercedes-Benz V-Class is an MPV model with ample rear space.
Last time I removed the middle row seats of my Mercedes-Benz V260 to load some miscellaneous items during a move, and the process went quite smoothly. Preparing the right tools is crucial—I used a socket wrench and gloves to protect my hands. The seats are fixed to the sliding rails, usually with two screws on each side at the end of the rails. I slowly loosened them with the wrench, being careful not to apply too much force to avoid stripping the threads. It's best to start from the outer side when removing the screws, one by one, and check for any wiring connected to power adjustments or heating functions. When lifting the seat, do it gently to avoid damaging the wires. After removal, the space became much larger, but don’t lose the screws—I kept them in a small box. If you have all the tools, you can do it yourself, but for safety, work on a flat surface. If you’re not confident, it’s better to consult a professional to prevent damaging the car.
Removing the middle row seats of a Mercedes V260 is actually not difficult, the key is to proceed step by step. First, I would check the seat's mounting points, usually looking for screw holes near the sliding rails under the seat. A socket wrench is the most suitable tool to prepare, and make sure not to use the wrong size to avoid affecting the outcome. When loosening the screws, do it from back to front, and don’t rush to remove them all at once to prevent the seat from suddenly dropping. This car may have some connected wiring, such as for airbags or control systems, so it’s safer to disconnect the battery before proceeding. Having two people help lift the seat during removal is safer, as it’s too heavy and could cause injury. After removal, check that the floor is even—doing it yourself with the right tools can save trouble. When reinstalling, ensure the screws are properly tightened and test the functions.
