Steps for Driving and Parking Operations?

1 Answers
Barnes
07/30/25 1:48am
First, confirm the parking environment of the car to check for any safety hazards. The parking space should be spacious enough to avoid obstructing the opening of car doors and the entry and exit of passengers. For manual transmission cars, press the brake pedal, then press the clutch pedal to cut off power transmission and bring the car to a complete stop. For automatic transmission cars, simply press the brake pedal to stop the car. For manual transmission cars, shift the gear into neutral, release the clutch pedal, and engage the handbrake. For automatic transmission cars, shift into the parking gear (P) and engage the handbrake or press the electronic parking brake.
Was this review help?
6
0
Share
More Forum Discussions

How much fuel is left when the fuel tank warning light comes on in the Baojun 730?

If the fuel tank warning light comes on, most vehicles can still run for about 30 kilometers. Therefore, the remaining fuel is approximately 1.5 liters. The Baojun 730 has a fuel tank capacity of 52 liters, so the standard full tank is also 52 liters. However, for safety reasons, it is best not to fill the tank completely. Filling the tank to the brim can be harmful to the carbon canister, as the entire tank will be filled with gasoline, and the evaporated gasoline will enter the carbon canister, which over time can affect the performance of the activated charcoal. Additional Information: Note 1: The size of the fuel tank is directly related to the vehicle's fuel consumption. Generally, a full tank can support a range of over 500 kilometers. For example, a vehicle with a fuel consumption of 10 liters per 100 kilometers typically has a fuel tank capacity of around 60 liters. Note 2: Different vehicle models have different fuel tank capacities, and even within the same category, different brands may have varying tank sizes, as there is no national standard. However, most automobile manufacturers follow a general rule that a full tank should support a range of about 600 kilometers, and not less than 500 kilometers.
16
3
Share

How to Solve Volkswagen Engine Oil Burning Issue?

If an older vehicle is experiencing engine oil burning, you can appropriately choose to add higher viscosity engine oil to enhance the sealing between the engine pistons and cylinder walls. If signs of engine oil burning are detected in the vehicle, frequently check the oil dipstick and replace the engine oil and oil filter regularly as required.
3
5
Share

What to do if the Volkswagen CC burns engine oil severely?

If an older vehicle is experiencing excessive oil consumption, you may consider using engine oil with higher viscosity to enhance the sealing between the engine pistons and cylinder walls. If signs of oil burning are detected, it is essential to frequently check the oil dipstick and replace the engine oil and oil filter regularly as required.
1
5
Share

How to Solve Water Leakage in Volkswagen Lavida?

Check if the drainage holes of the sunroof and doors are blocked. You can find a disposable chopstick, break it, and use the tip of the chopstick to poke the drainage holes under the doors. After unclogging the drainage holes, there will be no water accumulation.
17
5
Share

How to Solve Water Leakage in Volkswagen Lavida Doors?

Check if the drainage holes of the sunroof and doors are blocked. You can find a disposable chopstick, break it, and use the tip of the chopstick to poke the drainage holes under the door. After unclogging the drainage holes, there will be no water accumulation.
5
4
Share

What is the problem when the instrument panel does not receive the EECU message?

The instrument panel not receiving the EECU message indicates that the Vehicle Control Unit (VECU) cannot receive signals from the Engine Control Unit (EECU). This situation is usually caused by loose connectors and should be addressed by a professional technician as soon as possible. Fault line detection for the instrument panel not receiving the EECU message: 1. Disconnect the boost pressure temperature sensor and turn the ignition to the ON position. 2. Measure the resistance between pin 11 (CAN-H) and pin 12 (CAN-L) of the communication diagnostic interface in the cabin as 69 ohms, then turn the ignition to the ON position. 3. Disconnect the VECUSL3 plug and measure the termination resistance between pin 6 and pin 7 as 130 ohms, and between pin 3 and pin 4 as 133 ohms, with no obvious issues found. 4. Disconnect the VECUSL3 plug and turn the ignition to the ON position. Measure the voltage to ground for pin 6 as 1.9V, pin 7 as 3V, pin 3 as 2.4V, and pin 4 as 2.4V. It is determined that the communication voltage from the EECU to the VECU is abnormal. 5. Disconnect the main power supply.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.