Speed Limit 60, Actually Driving 80 – How Much Over the Speed Limit Is That?

1 Answers
DelSteven
07/30/25 2:06am
Driving at 80 in a 60 speed limit zone constitutes a 33% over-speed violation. According to the 'Road Traffic Safety Law of the People's Republic of China' regulations, Article 86 stipulates penalties for vehicles exceeding speed limits as follows: 1. Exceeding the speed limit by less than 10% will not be penalized for the time being; 2. Exceeding the speed limit by more than 10% but less than 20% will result in a fine of 200 yuan and 3 demerit points; 3. Exceeding the speed limit by more than 20% but less than 30% will result in a fine of 200 yuan and 6 demerit points; 4. Exceeding the speed limit by more than 30% but less than 50% will result in a fine of 200 yuan and 6 demerit points; 5. Exceeding the speed limit by more than 50% but less than 70% will result in a fine of 1000 yuan and 12 demerit points, with the possibility of driver's license revocation; 6. Exceeding the speed limit by more than 70% will result in a fine of 2000 yuan and 12 demerit points, with the possibility of driver's license revocation.
Was this review help?
20
5
Share
More Forum Discussions

How much engine oil should be added to the Lifan KPV150?

The Lifan KPV150 requires 1400 milliliters of engine oil. Introduction to Engine Oil: Engine oil, also known as engine lubricant, has a density of approximately 0.91×10³ (kg/m³). It serves multiple functions such as lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, and shock absorption. It is often referred to as the "blood" of a vehicle. Engine oil consists of two main components: base oil and additives. The base oil is the primary constituent of lubricants, determining their fundamental properties, while additives compensate for and enhance the performance shortcomings of the base oil, imparting new characteristics. Additives are an essential part of lubricants. Classification of Engine Oil: Engine oils on the market can be broadly categorized into two types based on their base oil: mineral oil and synthetic oil.
8
5
Share

Can a Lighter That Can't Be Pulled Out Catch Fire?

A lighter that cannot be pulled out may catch fire. This could be due to the lighter's wiring catching fire or the lighter socket catching fire. There are two reasons why a lighter cannot be pulled out: 1. It may be because the fuse is blown. The lighter is stuck, not heating up, but simply stuck inside and unable to be pulled out due to a blown fuse. You need to check the fuse and replace it. After replacement, the lighter will automatically pop out in about 20 to 30 seconds. 2. Frequent use of the lighter, pulling it out and inserting it repeatedly, may cause the retaining spring to loosen or become damaged. The lighter is stuck inside but can still heat up normally; it just cannot be pulled out. This is due to frequent use causing the retaining spring to loosen or become damaged. You need to gently twist the lighter and slowly pull it out.
15
1
Share

What causes a single-cylinder diesel engine fuel injection pump to stop spraying oil?

Single-cylinder diesel engine fuel injection pump not spraying oil may be caused by the following reasons: 1. Air entering the fuel line: If air enters the fuel line, simply bleed the air out. 2. Plunger wear: Prolonged use causes plunger wear, which must be replaced immediately. 3. Governor malfunction: If the fork falls off, the fuel pump won't be in the open position, requiring inspection by removing the left governor cover. Additional information: A single-cylinder diesel engine refers to a diesel engine with only one cylinder when classified by cylinder count. Single-cylinder diesel engines are mainly used in agricultural machinery, construction machinery, automotive industry, marine machinery, and power industry. Single-cylinder air-cooled diesel engines are favored by many users for their lightweight, compact size, simple layout, and easy maintenance features, and are widely used as power sources for micro tillers.
3
3
Share

What is the difference between Tesla fast charging and slow charging?

Tesla fast charging and slow charging differences: 1. Fast charging is high-power DC charging: The charging power can generally reach above 40kW, using a DC charging pile charging interface (5 holes), converting the grid's AC power into DC power and delivering it to the electric vehicle's fast charging port, with electricity directly entering the battery for charging. 2. Slow charging is low-power AC charging: The charging power is generally 3kW or 7kW, using an AC charging pile charging interface (7 holes), inputting the grid's AC power into the electric vehicle's slow charging port, where the vehicle's onboard charger converts AC power to DC power before inputting it into the battery to complete charging. Although fast charging can save a lot of time compared to slow charging, fast charging has a certain impact on battery lifespan. If not particularly necessary, it is recommended to use it as little as possible. Even if fast charging is needed, frequent use should be avoided.
5
2
Share

How Far Can You Drive with a Faulty Ignition Coil?

It is possible to drive with a faulty ignition coil, but it will increase fuel consumption and reduce the engine's lifespan. The consequences of a faulty ignition coil are as follows: 1. A faulty coil can cause a misfire, leading to symptoms such as engine shaking, lack of power, and unstable idling. When a cylinder misfires, the air-fuel mixture in that cylinder fails to ignite and is expelled through the exhaust, increasing fuel consumption and carbon buildup, which further shortens the engine's lifespan. 2. The engine may stall while driving, and in severe cases, it may fail to start. Additional tips on protecting the ignition coil: 1. Pay attention to the condition of the spark plugs, as using worn-out spark plugs increases the workload on the ignition coil. 2. Monitor the engine coolant temperature, as overheating can easily damage the ignition coil.
19
3
Share

What is the valve clearance for a single-cylinder diesel engine?

The intake valve clearance for the vertical 195-type diesel engine is 0.18~0.25mm, and the exhaust valve clearance is 0.20~0.27mm. However, some diesel engines use materials with lower expansion coefficients for the exhaust valves or implement enhanced heat dissipation measures for the exhaust valves, resulting in equal clearance for both intake and exhaust valves. For example, in the 195-type diesel engine, both intake and exhaust valve clearances are 0.4mm. Additional information: The function of valve clearance is to ensure tight closure of the intake and exhaust valves and to accommodate thermal expansion of the valves and their transmission components. During diesel engine operation, the intake valves are cooled by fresh air, maintaining temperatures between 300~400°C, while the exhaust valves are exposed to high-temperature exhaust gases, reaching temperatures between 600~800°C. Consequently, exhaust valves experience higher temperatures and greater thermal expansion compared to intake valves.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.