Solutions for When the Rear Car Door Won't Open from Inside or Outside

1 Answers
Clara
07/29/25 3:26pm
Sometimes the door won't open because it's misaligned, just like an old house door that requires pulling while turning the key. Have one person pull the door from the outside while another pushes from the inside. This might help release the lock. Locate the door cable and use a hook or similar tool to try pulling the cable or pushing the connection point between the cable and the lock mechanism. Remove the door panel from inside the car, although this can be quite challenging since the door won't open. When the car door won't open from either side, it's often due to a malfunction in the lock mechanism, and the only solution is to use force for repair.
Was this review help?
9
1
Share
More Forum Discussions

What does it mean when the Traffic Management 12123 app shows a locked driver's license status?

Driver's license locked status means that certain procedures such as transfer of registration cannot be processed temporarily. The following are common reasons for a driver's license being locked: Probation period not completed: According to relevant laws, procedures related to driver's license such as transfer of registration can only be processed one year after obtaining the license. Failure to submit physical condition certificate: For drivers aged 60 or above, if they fail to submit physical condition certificate within one year after the end of a scoring cycle; For drivers holding licenses for large buses, tractors, city buses, medium buses, trolleybuses, or trams, if they fail to submit physical condition certificate within one year after the end of two scoring cycles; For drivers holding licenses for small automatic transmission vehicles for the disabled, if they fail to submit physical condition certificate within one year after the end of three scoring cycles. Solution: Submit physical condition certificate. Failure to renew the driver's license for more than one year after its expiration. Drunk driving record not cleared; Record of 12 penalty points not cleared; Driver's license is in the process of being revoked, suspended, or confiscated; Other traffic violations not handled. If none of the above reasons apply, or if there are no related circumstances, it is possible that the driver's license has been fraudulently used. In this case, you need to visit the traffic management department in person to clarify and resolve the issue, and restore the normal status of the driver's license.
5
0
Share

How Long Does It Take to Learn Automatic Transmission?

Learning automatic transmission at a driving school varies in duration depending on the region, the driving school, and individual factors such as sense of direction and aptitude. Some driving schools require queuing after enrollment, followed by waiting for notifications after passing Subject 1 to start learning Subject 2. Continuous learning can be completed within a month. Others may require queuing for each subject, making the timeline unpredictable and potentially extending to several months. Each subject typically takes over half a month to learn, with long waiting periods. Details are as follows: 1. Subject 1: Traffic safety laws, regulations, and related knowledge. The exam question bank's structure and basic question types are set by the Ministry of Public Security, with provincial traffic management departments adapting it to local conditions. 2. Subject 2: Field driving skills, including reversing into a garage, stopping and starting on a slope, turning at right angles, driving on curves, and parallel parking. In cities like Shanghai, Subject 2 includes nine mandatory tests: reversing into a garage, turning at right angles, parallel parking, driving through tunnels, stopping to take a card, driving on curves, U-turns on narrow roads, emergency stops, and stopping and starting on a slope. 3. Subject 3: Road driving skills, covering preparation before starting, straight-line driving, lane changes, passing intersections, pulling over, crossing pedestrian crossings, passing school zones and bus stops, meeting traffic, overtaking, U-turns, and night driving. 4. Subject 4: Safe and civilized driving knowledge, focusing on related safety and civilized driving concepts.
10
5
Share

Go Straight, Turn Left or Turn Right?

When going straight yields to turning right, the straight-going vehicle is on the main road, while the right-turning vehicle is preparing to merge from the auxiliary road. The straight-going vehicle on the main road has the right of way. The following are the right-of-way rules for motor vehicles passing through intersections without traffic signals: 1. Right-side road: Yield to vehicles coming from the right-side road; 2. Straight-going: Turning vehicles yield to straight-going vehicles; 3. Left-turning: For vehicles traveling in opposite directions, right-turning vehicles yield to left-turning vehicles. Left-turning vehicles spend more time at the intersection than right-turning vehicles, affecting other vehicles and pedestrians for a longer duration. Therefore, right-turning vehicles should yield to left-turning vehicles. If left-turning vehicles were to yield, it would exacerbate the aforementioned adverse factors, hindering the quick clearance of vehicles at the intersection and causing congestion.
6
3
Share

Can Transmission Faults Be Resolved Without Disassembly?

No, transmission faults cannot be resolved without disassembly. Below is an introduction to transmission faults: Common Transmission Faults: Slipping transmission, transmission oil leakage, jerking, transmission noise, difficulty in shifting gears, etc. Disassembly and Assembly of the Transmission: Prepare tools and small boxes for storing various parts, and perform the disassembly on a clean and flat workbench. If there is no repair manual for the vehicle, prepare a notebook and adhesive tape for marking; disassembly should start from the front oil pump, proceeding from front to back and from outside to inside, while keeping records at all times; most automatic transmission housings are made of cast aluminum, so pry bars and iron tools should never be used directly for disassembly; when disassembling the hydraulic control valve body, be careful and meticulous, and when separating the upper and lower valve bodies, prevent balls, retaining rings, etc., from falling to the ground, and accurately remember their correct positions; when disassembling and inspecting the one-way clutch, pay attention to its correct assembly direction, and never reverse it during assembly; after disassembling the parts, clean them with gasoline and dry them with low-pressure compressed air, avoiding the use of fiber-shedding cotton yarn to wipe valve components; O-rings and other vulnerable parts should, in principle, be replaced with new ones after disassembly, and aged, deformed, or worn vulnerable parts should not be reused; new clutch plates and brake plates should be soaked in transmission oil and installed only after fully absorbing the oil; valve cores, pistons, seals, etc., should be coated with transmission oil during assembly; during assembly, tighten screws strictly according to the specified torque.
5
4
Share

What is the fuel consumption of the Ford Everest?

Ford Everest's fuel consumption is within an acceptable range. Here is the relevant introduction of the Ford Everest: 1. Midsize SUV: The Ford Everest has a curb weight of over two tons, so its fuel consumption is naturally not low. The 2.0T gasoline engine model has an official fuel consumption of around 10L per 100 kilometers; the actual fuel consumption is slightly higher, approximately 11-12L per 100 kilometers, and it can be even higher in congested conditions, while it is lower on highways. 2. The Ford Everest's power is excellent among midsize SUVs: Whether it's the gasoline engine model or the diesel engine model, the power is very strong, making overtaking or climbing hills effortless. Even with its weight of over two tons, this car can still deliver a sense of acceleration, which shows how powerful its engine is.
5
2
Share

Can 360 Panoramic View Be Kept On All the Time?

360 panoramic view can be kept on all the time. Here are some relevant introductions about 360 panoramic view: 1. Background of demand: With the rapid development of computer technology, the types included in multimedia are increasing, and the effects that can be presented are also increasing. Some more traditional presentation methods are increasingly unable to meet the requirements of most customers for display methods. In traditional presentation methods, the means of display are nothing more than static flat images, dynamic videos, and displays through three-dimensional panoramas. Static images can only provide a certain angle of the scene. Even with a wide-angle lens, it is not possible to effectively and comprehensively represent the scene; while dynamic videos can give users a comprehensive understanding of the scene, the image perspective is still limited, and the viewing method depends on the photographer's shooting method, which is not free. The method of three-dimensional modeling can solve the problems existing in both static images and dynamic videos, but the cost is high, and the authenticity is not always satisfactory. Therefore, when it is necessary to present a scene in a real, comprehensive, and intuitive manner, 360 panoramic view is undoubtedly the best choice. 2. Industry applications: 360-degree panoramic technology provides unique methods for recording phenomena, discovering patterns, and predicting results. The application fields involved include human-computer interaction, geographic information, engineering management, environmental simulation, medical diagnosis, agricultural management, etc.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.