Solutions for Loose Door Glass

2 Answers
StMia
09/05/25 3:25am
Solutions for loose door glass are as follows: Loose door screws or lifting bracket: When driving on bumpy roads, the car window glass may become loose. This is likely caused by loose internal fastening screws or the lifting mechanism bracket. To fix this issue, simply visit a 4S shop and have the staff tighten the loose door glass. Aging window glass sealing strip: Purchase a lubricant online and apply it evenly on the sealing strip. If the strip is severely aged, it is best to replace it directly.
Was this review help?
10
0
Share
MacAdaline
09/17/25 4:02am
Last time I encountered a loose left front window glass issue, which made annoying creaking noises while driving. I tried tightening the screws at the bottom of the door panel with a Phillips screwdriver and found two were almost falling out. But be careful not to overtighten, as it may cause the glass angle to tilt. The most troublesome part was the aged and broken door panel clips, which required purchasing new ones for replacement – a full set can be bought online for about ten yuan. Remember to raise the window to the top before removing the door panel, otherwise the screwdriver might scratch the inner side of the glass. If the glass wobbles left and right during operation, it's likely due to a deformed window regulator bracket, which requires a visit to the repair shop for a complete bracket assembly replacement. Aged weatherstripping can also cause glass looseness; if the rubber feels hard or cracked when pressed with fingers, it needs replacement.
Was this review help?
19
1
Share
Expand All
More Forum Discussions

What are the requirements for the Haikou license plate lottery?

Here are the specific requirements for participating in the Haikou license plate lottery: 1. No other vehicles: The applicant must not have any passenger vehicles registered in the province and should not have any other motor vehicles that are due for scrapping but have not completed the deregistration process. 2. Valid driver's license: The applicant must hold a valid motor vehicle driver's license issued by the traffic management department of China's public security authorities and can apply for an incremental quota from the regulatory management agency at their registered residence or habitual residence. 3. Provincial resident: The applicant must be an individual whose domicile is in the province. Here is additional information: 1. Individuals domiciled in Hainan Province: This includes local residents, active-duty officers, civilian personnel, and non-commissioned officers stationed in Hainan; Hong Kong, Macau, and Taiwan residents and foreigners who hold valid identification documents and have continuously resided in the province for over two years; and non-local residents who hold a valid residence permit for the province and have paid social insurance in the province for a cumulative total of 48 months (inclusive) within the last 8 years or continuously for 24 months (inclusive) within the last 24 months. 2. Lottery process: To participate in the license plate lottery, applicants must first register for an appointment to queue, then uniformly participate in the lottery.
19
0
Share

What is the appropriate tire pressure for a sedan?

Standard tires should be inflated to 2.4-2.5 bar, while reinforced tires require 2.8-2.9 bar. The maximum tire pressure should not exceed 3.5 bar. Car tires are crucial components of a vehicle, and tire pressure is essentially the lifeblood of tires. Each tire has both maximum and minimum pressure limits - exceeding either can compromise driving safety. Key considerations for tire pressure maintenance include: 1. Regular pressure checks: Inflate to standard values and routinely inspect for tire damage to prevent blowouts, bulges, or excessive wear. Avoid cooling hot tires with cold water as extreme temperature changes can accelerate aging; allow natural cooling instead. Develop good driving habits and avoid hitting curb edges. 2. Maintain proper pressure: When tire pressure is normal, no adjustment is needed, nor is helium inflation necessary. Therefore, focus on routine maintenance through proper channels.
14
1
Share

Where is the remote control receiver for the 7th generation Accord?

The receiver is integrated with the power window switch on the driver's side. Here is some information about the Accord: 1. Introduction: The Accord is a mid-size sedan launched by Honda Motor Co., Ltd. in 1976. In Taiwan, it was initially called 'Yago' when distributed by Nan Yang Industrial Co., Ltd., while in mainland China, it is known as 'Yage'. 2. Details: The 8th generation model was launched in February 2008. It is divided into Japanese, European, and American versions, with engine displacements of 2.0, 2.2 diesel (for the European market), 2.4, and 3.5 liters. 3. Significance: In a sense, the Accord embodies the idea of harmonizing various performance aspects of a car, such as power and fuel efficiency. This concept of 'harmony' has been passed down through generations.
12
5
Share

What is the reason for the certificate pending review status?

Below are the reasons for the certificate pending review status: 1. Reasons: The certificate information has not been uploaded, the certificate information has been uploaded but the exchange is not yet completed, the QR code on the certificate is smudged and cannot be scanned, or the vehicle management office does not have the information for new models or a few specific models due to the recent networking of the China Machinery Service Center. 2. Precautions for new vehicle registration: The vehicle management office will have a specialized photographer take photos of the vehicle, place a specially set number plate at the lower right corner of the front windshield, and then take photos of the vehicle. The number rubbing will also be done by the specialized photographer. Sometimes, the 4S shop has already taken the photos and done the number rubbing, but due to various reasons, the vehicle management office needs to re-process the information.
19
4
Share

Is it necessary to install air vents for the Audi A4L?

Audi A4L air vents are necessary to install. Below are the relevant introductions: 1. The necessity of air vents: Rear air vents are generally designed for rear passengers, usually installed behind the central armrest of the front seats, and some are located at the B-pillar position. You can have it installed at a professional car modification shop by adding an air vent. 2. Precautions: The installation methods may vary for different car models due to differences in design and construction, and it may involve modifications in many areas. It is recommended to have it installed at a professional modification shop.
16
3
Share

What is the difference between tires 103V and 103W?

103 represents a load capacity of 805KG. Note that the difference between W and V lies in the speed rating. V and W indicate the maximum allowable speed for the tire. A 103V tire can support a maximum speed of 240 km/h under the specified load, while a 103W tire can support a maximum speed of 270 km/h under the specified load. Below is extended information on automotive tire specifications: 1. Specification model representation: Tires are crucial components of a vehicle, and they come in various specifications and models, each suitable for different types of vehicles. The specification model is usually marked on the sidewall of the tire as a series of alphanumeric characters, representing the tire's tread width, aspect ratio, type, rim size, load index, and speed rating. 2. Speed rating: Based on the maximum speed they can withstand, tires are divided into different speed ratings from A to Z, with the A rating further subdivided into eight levels from A1 to A8. The further back the letter representing the speed rating is in the alphabet, the better the tire's performance.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.