···
Log in / Register

Solutions for High Fuel Consumption in Reiz

3 Answers
LaJoseph
08/30/25 6:48am
The fuel consumption of Reiz is 8.8-9.5L/100km. Factors affecting fuel consumption: Poor driving habits: Squeezing into gaps, sudden stops and starts, driving at high speeds in low gear, and other habits can all lead to increased fuel consumption. Engine carbon deposits: Carbon buildup in the engine can also cause high fuel consumption. Low tire pressure: Insufficient tire pressure or underinflated tires can make the car consume more fuel. Before driving, it's advisable to check the tire inflation. Tire pressure can also be measured with instruments, and timely inflation can reduce fuel consumption. Overloaded trunk. Methods to reduce fuel consumption: Drive at a steady speed and avoid sudden braking and acceleration. Regularly maintain the vehicle.
Was this review help?
4
2
Share
CarmenMarie
09/12/25 3:49am
When I noticed the high fuel consumption of my Reiz, I started with driving habits, and the effect was immediate. For example, avoid stomping on the accelerator when starting; gradually accelerating reduces engine load. On highways, using cruise control maintains a steady speed, avoiding frequent braking and acceleration. In urban areas with heavy traffic, it's best to take ring roads to avoid congestion. Don't set the air conditioning too high, especially at low speeds, as it significantly increases fuel consumption. Driving with windows open on highways in summer actually consumes more fuel due to increased wind resistance, so using ventilation mode wisely is better. Regularly cleaning engine carbon deposits also helps; after tens of thousands of kilometers, carbon buildup can lead to incomplete fuel combustion, naturally increasing fuel consumption. I recommend recording fuel consumption data weekly to identify peak times and adjust travel plans accordingly.
Was this review help?
16
3
Share
Expand All
MacEvan
10/26/25 4:38am
As a frequent DIY maintenance owner of the Reiz, I believe high fuel consumption often stems from minor details. Check if the tire pressure meets the standard—too low pressure increases rolling resistance. Replace the air filter with a new one—a clogged one can lead to insufficient engine intake and reduced combustion efficiency. Don’t forget to replace aging spark plugs, as they optimize ignition performance and reduce fuel consumption. Change the engine oil on time—old oil with higher viscosity causes greater frictional losses. While washing the car, inspect the braking system—stuck brake pads increase drag and fuel consumption. Additionally, travel light—clear out unnecessary items from the trunk to reduce vehicle weight. These small adjustments can add up to significant fuel savings.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

Do Electric Vehicles Have Three-Way Catalytic Converters?

Electric vehicles do not have three-way catalytic converters. The purpose of a three-way catalytic converter is to purify the exhaust gases produced by burning fuel. Since electric vehicles do not burn fuel, they do not require a three-way catalytic converter. The function of a three-way catalytic converter: A three-way catalytic converter is installed in the front section of a car's exhaust pipe to reduce toxic and harmful substances in the vehicle's exhaust emissions. Hazards of not having a three-way catalytic converter in a car: The engine emission warning light on the instrument panel will illuminate, and the vehicle's exhaust emissions will severely exceed standards. While driving on the road, the vehicle may be caught for violations and face penalties such as fines. If the vehicle reaches the annual inspection deadline, it will fail the inspection test.
17
3
Share

What Causes High-Temperature Faults in Electric Vehicle Batteries?

Electric vehicle overheating is primarily due to issues with the cooling system. For water-cooled systems, check if the radiator condenser is excessively dirty. Types of Electric Vehicle Batteries: Electric vehicles mainly use lead-acid batteries, flooded batteries, gel maintenance-free batteries, ternary lithium batteries, and lithium iron phosphate batteries. Battery Usage Tips: Since the range of low-speed electric quadricycles is still relatively limited and cannot fully meet the daily commuting needs of the general public, installing a range extender can increase the range and operational scope. This ensures smooth round-trip commutes without the worry of running out of power midway.
19
1
Share

Are Electric Mopeds Considered Motor Vehicles?

Two-wheeled electric motorcycles fall under the category of motor vehicles. To operate them on public roads, registration is required, along with the purchase of compulsory traffic insurance for motor vehicles. The driver must possess a motorcycle driver's license. Mopeds Require a License: Two-wheeled mopeds are classified as motor vehicles. Their maximum designed speed, engine displacement, or total motor power are lower than those of regular motorcycles, with technical parameters and performance lying between electric bicycles and motorcycles. An F-class driver's license is required to operate them. Procedures for Applying for a Moped Driver's License: For first-time applicants of a motor vehicle driver's license, the "Motor Vehicle Driver's License Application Form" must be completed. Additionally, the applicant must submit the completed form along with a medical certificate issued by a county-level medical institution or a military medical institution at or above the regimental level.
19
5
Share

What does the exclamation mark on an electric vehicle dashboard mean?

When an exclamation mark appears on the car dashboard, there are five possible scenarios: general faults, automatic transmission faults, brake system faults, abnormal tire pressure, and lighting faults. Below is a detailed analysis of these five situations: General Faults: A triangle with an exclamation mark inside indicates that the vehicle's general performance, components, or functions have malfunctioned. Common issues include parking sensor failure, fuel cutoff system intervention or failure, external light failure, or engine oil pressure sensor failure. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a problem with the transmission or that the transmission lubricant is below the normal range. Transmission fluid should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, typically indicating a brake system malfunction or low brake fluid level. Immediate inspection and repair of the brake system are required to avoid accidents. Abnormal Tire Pressure: A horizontal line with parentheses below and an exclamation mark in the middle is the tire pressure monitoring warning light. This light illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue.
10
3
Share

What Causes a Fuel-Injected Motorcycle to Stall When Accelerating?

Here are the reasons why a fuel-injected motorcycle stalls when accelerating: Idle speed too low: When accelerating, the sudden increase in air intake causes the air-fuel mixture to become too lean to ignite, resulting in stalling. In this case, the idle speed can be adjusted appropriately. Choke switch not closed before cold start: Accelerating at this time can also cause the engine to stall. If the motorcycle's choke switch is not open, this situation can be ruled out. Carburetor fuel supply issues: For example, a clogged fuel filter or a damaged float chamber switch can cause insufficient fuel supply. When accelerating, the fuel level in the carburetor float chamber drops, but the subsequent fuel supply cannot keep up, leading to stalling. This type of fault usually results in a brief increase in RPM before stalling when accelerating.
15
2
Share

What causes an EFI motorcycle to jerk at low speeds but run normally at high speeds?

An EFI motorcycle jerks when riding but idles normally. This is likely due to a faulty spark plug. Spark plug leakage can cause engine misfire, which is not obvious at idle but becomes noticeable when riding. Replacing the spark plug can resolve the issue. Steps to replace the spark plug: 1. Grab the high-voltage cap with your hand and pull it upward firmly to remove it. 2. Attach the spark plug tool. 3. Rotate counterclockwise to remove the old spark plug. 4. Install the new spark plug to complete the process. Function of the spark plug: The spark plug is a critical component of a gasoline engine's ignition system. It introduces high-voltage electricity into the combustion chamber and generates a spark across the electrode gap to ignite the air-fuel mixture in the cylinder. It mainly consists of a terminal nut, insulator, terminal stud, center electrode, side electrode, and shell, with the side electrode welded to the shell.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.