Solutions for High Fuel Consumption in Peugeot 307?

2 Answers
GabrielFitz
07/29/25 1:32am
Reasons and solutions for high fuel consumption in Peugeot 307: 1. Engine carbon deposits: Excessive carbon buildup can lead to incomplete combustion of the air-fuel mixture, increasing fuel consumption. Regular cleaning of engine carbon deposits is necessary, including: intake tract, throttle body, fuel injectors, and cylinder deposits. The solution is timely carbon deposit removal. 2. Vehicle weight: Carrying excessively heavy loads can increase fuel consumption by about 2% compared to normal driving. Solution: Avoid carrying too much weight regularly to reduce vehicle load. 3. Clogged air filter: A clogged air filter restricts airflow, causing an overly rich air-fuel mixture or blocked exhaust pipes. Solution: Replace the air filter promptly. 4. Worn spark plugs: Worn spark plugs with excessive electrode gap reduce ignition efficiency, leading to incomplete combustion and increased fuel consumption. Solution: Replace spark plugs in time. 5. Low cylinder pressure: Practical experience shows that cylinder pressure below specified values can increase fuel consumption by 20%-25%. Solution: Conduct timely cylinder pressure checks.
Was this review help?
18
0
Share
ODaniel
08/12/25 5:38am
I've been driving this Peugeot 307 for over three years, and it used to have high fuel consumption. I've figured out several solutions. First, check the tire pressure—if it's too low, fuel consumption will spike. I measure it monthly to maintain the standard value of around 2.3 kg. Also, replace the air filter if it's clogged; a dirty one affects air intake efficiency. I usually change it every six months—buying one online costs just a few dozen bucks, and I install it myself. Cleaning the fuel system is important too; older Peugeot 307s tend to accumulate carbon deposits. I often use additives and take it on the highway to rev the engine—simple and effective. If the spark plugs are old, replace them to ensure ignition efficiency, and don’t skimp on quality. Driving habits matter as well—I now start slower, avoid slamming the brakes, and use cruise control on highways, which immediately lowers fuel consumption. Finally, if there’s an engine issue like an oxygen sensor failure, take it to a professional shop for a computer diagnosis. These small tweaks save fuel and money, making the drive much more enjoyable.
Was this review help?
8
4
Share
Expand All
More Forum Discussions

What is the fuel tank capacity of the 2018 Magotan 330 Luxury Edition?

The fuel tank capacity of the 2018 Magotan 330 Luxury Edition is 66L. The vehicle is equipped with a 1.8T 180 horsepower L4 engine, and all models in the series use a 7-speed dry dual-clutch transmission (MT). All models in the series feature a front-engine, front-wheel-drive layout. All Magotan 330 Luxury Edition models have a fuel tank capacity of 66 liters. Fuel tank maintenance is as follows: Drain accumulated water and sediment from the fuel tank, and check for oil leaks at the fuel pipe joints and switches. For fuel tank caps equipped with air valves and steam valves, also check if the ventilation holes are clear. The filter screen at the fuel filler neck should remain intact to prevent impurities from entering the fuel tank during refueling and clogging the fuel lines. The sealing gasket on the fuel filler cap should also be intact to prevent fuel from spilling out while driving. Methods to open the fuel tank: Mechanical key opening: This method is typically seen in some rugged off-road vehicles. Most modern family cars do not use mechanical keys for opening the fuel tank due to the relative complexity of the process. In-car switch method: The location of the in-car fuel tank switch varies by model. It may be on the floor to the left of the driver's seat, on the left front door panel, or on the center console, usually marked with a fuel pump icon. However, note that the in-car switch can easily lead to forgetting to turn off the engine before refueling, so drivers should always remember to turn off the engine before refueling. Press-to-open method: The press-to-open fuel tank door is currently the most convenient method. The driver only needs to park the car, and the fuel attendant can press to open the fuel tank for refueling. However, when not parked for refueling, drivers should always lock the central control to prevent the fuel tank cap from being opened.
17
3
Share

How to Replace the Battery in a Citroen Car Key?

Citroen car key battery replacement method is as follows: 1. Prepare the car key and use a small flat-head screwdriver to gently pry open the seam. 2. Once there is a small gap, pry the lower seam. 3. After opening the back cover, the battery will be visible. 4. Use a small flat-head screwdriver to pry out the battery for replacement. 5. After replacing the battery, snap the back cover back on. Precautions for replacing the battery in a Citroen car key are as follows: 1. Do not touch the circuit board or battery terminals. 2. Before prying open the key, take measures to prevent small parts from falling and getting damaged. 3. The remote is waterproof; if it gets wet, dry it immediately. 4. The battery model must be the same as the original battery model. 5. When replacing the battery, ensure there is no dirt, grease, or other foreign matter on the electrode contact points. 6. Before removing the battery, clearly identify and remember the installation polarity to ensure the new battery is installed with the same positive and negative orientation as the original. 7. After replacing the battery, check to ensure all functions of the smart key are working properly.
5
3
Share

Where is the battery located in a Mini car?

The battery of a Mini car is located in the upper left corner of the engine compartment, covered by a rectangular plastic lid. Removing this lid will reveal the battery. While BMW vehicles typically have their batteries in the trunk, Mini cars position theirs within the engine compartment. Below are maintenance measures and precautions for automotive batteries: 1. Always keep the battery clean and dry, ensuring the vent holes remain unobstructed. Clean any oxide buildup on the terminals or clamps and apply a small amount of grease to prevent corrosion. 2. Avoid continuous use of the starter motor; each start should not exceed 5 seconds, with a 10-15 second rest between attempts. In winter, do not discharge the battery beyond 25%, and in summer, do not exceed 50%. 3. A fully charged battery should not be left unused for extended periods without periodic recharging, as this may lead to permanent damage. 4. When charging the battery, ensure the voltage is neither too low nor too high. The standard charging voltage for a 12V battery should be within the range of 13.5~14.5V, and for a 24V battery, it should be between 28~29.9V. 5. The electrolyte level should be 10~15mm above the plates. If the level is too low, add distilled water—not electrolyte—to adjust. In the absence of distilled water, rainwater or melted snow can be used as substitutes, but tap water should never be used.
2
5
Share

What is a car body usually composed of?

Car body is composed of three major parts and related components: front body, middle body, and rear body. The following is an introduction to car body components: 1. Front body ① Front bumper. ② Front fender: Located at the lower side of the engine hood and above the front wheel. ③ Engine hood: Located at the upper front of the vehicle, it is the maintenance cover of the engine compartment. ④ Front bulkhead: Located at the front of the passenger compartment, separating the engine room from the passenger compartment. ⑤ Front longitudinal beam: The main strength component of the front body, directly welded to the lower part of the body. 2. Middle body ① Pillars, sill panels, and floor. ② Roof: Refers to the cover at the top of the body compartment, equipped with sunroof, ventilation window, or antenna, etc. ③ Door: The passage for passengers to get on and off, equipped with accessories such as door locks, glass, and window regulators. 3. Rear body ① Luggage compartment and luggage compartment cover: The luggage compartment is the space for loading items, composed of luggage compartment components and body floor sheet metal parts. ② Rear side panel: Refers to the body sheet metal parts that cover the rear wheel and rear side body after the rear door frame. ③ Rear bumper: Located at the rear of the vehicle body, it plays a decorative and protective role for the rear parts of the vehicle.
16
2
Share

Is the Cruze a Three-Cylinder Engine?

The Cruze is not a three-cylinder engine; it is a four-cylinder engine. Here is an introduction to the Cruze: 1. The standard engine for the 2019 Chevrolet Cruze is a 1.4-liter turbocharged 4-cylinder gasoline engine; it delivers 153 horsepower and 130 Nm of torque; it offers high fuel economy, achieving 14.1 km/l on the highway; the Cruze's biggest difference from its competitors is Chevrolet's optional diesel engine. 2. As mentioned earlier, whether gasoline or diesel, the Cruze no longer offers a manual transmission; therefore, the standard Cruze is equipped with a 6-speed automatic, while the diesel Cruze uses a 9-speed automatic; all models are front-wheel drive, and to save fuel, all Cruze models use an engine idle start/stop system. 3. If most of your driving is on highways, it's important to note that although the Cruze offers forward collision avoidance, lane-keeping assist, and other advanced safety features, it does not have adaptive cruise control. 4. The standard 1.4L turbocharged 4-cylinder gasoline engine provides average acceleration, enabling the Cruze to reach 100 km/h in an estimated 7.7 seconds. The Cruze diesel engine offers two features: abundant torque and commendable fuel economy of up to 16.99 km/l.
11
4
Share

What are the body dimensions of the BMW 8 Series Gran Coupe?

The length, width, and height of the BMW 8 Series Gran Coupe are 5088 mm, 1932 mm, and 1410 mm respectively, which are official data. The length of the BMW 8 Series Gran Coupe refers to the distance between two vertical lines perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the car. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and the supporting plane of the vehicle. The 3.0-liter turbocharged engine used in the BMW 8 Series produces 340 horsepower and a maximum torque of 500 Nm. The engine's maximum power is achieved at 5000 to 6500 rpm, and the maximum torque is available from 1600 to 4500 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. National regulations have specific requirements regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is designed to provide sufficient lateral clearance for overtaking between adjacent lanes. In other words, the significance of vehicle width data in national standards lies in ensuring enough space during overtaking to prevent accidents caused by excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5 meters to meet the requirements of public road usage.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.