Solution for Fault Code U0415?

1 Answers
SanMiguel
07/30/25 12:52am
Whenever troubleshooting car issues, it's necessary to clear the fault codes. When performing code clearance, strictly follow the specified fault code clearing method for the particular vehicle model. Avoid simply and arbitrarily removing the negative ground cable of the battery to clear the fault codes. Below is extended information about the fault code:1. U0415 Fault Code: Applicable to all automobile manufacturers, meaning invalid data received from the Anti-Lock Brake System (ABS) control module (Invalid-Data-Received-From-Anti-Lock-Brake-System(ABS)-Control-Module).2. Principle: The function of the Anti-Lock Brake System (ABS) is to prevent wheel lock-up, allowing the car to steer while braking, ensuring the vehicle's braking directional stability, and preventing skidding and deviation.
Was this review help?
12
2
Share
More Forum Discussions

Does the driving experience remain after re-taking the driving test following a license revocation?

After a driving license is revoked and re-taken, the original driving experience cannot be retained. According to the relevant provisions of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," if a driving license is revoked due to failure to renew it on time or submit a medical examination report for more than two years, or if the driving license is revoked due to the driving license being legally revoked or the driving permit being legally withdrawn, the applicant must re-apply for a motor vehicle driving license from the vehicle management office of the public security traffic management department. The application will be processed as an initial license, and the driving experience will be recalculated. Below are precautions for using a driving license: 1. Driving licenses have a validity period: A driving license is only valid for driving legally if it is within the validity period. If the driving license expires and the holder does not renew it, driving with it is considered illegal. 2. Avoid accumulating 12 penalty points within 12 months: A driving license has 12 penalty points within a 12-month period. It is essential to avoid accumulating 12 points within 12 months, otherwise, the holder will need to attend training at the local vehicle management office and pass a test afterward. If the test is failed, the holder must continue taking the test until passing, after which the driving license can be reclaimed.
18
0
Share

How often should the spark plugs of a Tiggo 3 be replaced?

The replacement interval for Tiggo 3 spark plugs is 30,000 kilometers. Spark plugs are a crucial component of a gasoline engine's ignition system. They introduce high-voltage electricity into the combustion chamber and generate sparks by jumping the electrode gap, thereby igniting the combustible air-fuel mixture in the cylinder. If a spark plug is damaged, it can directly cause issues such as electrical leakage in the vehicle's ignition system, increased fuel consumption, and reduced power. The most significant problem is difficulty in ignition, which affects the normal operation of the vehicle. Severe erosion of the spark plug, such as blistering at the top, damage, or melted and eroded electrodes, indicates that the spark plug is already damaged and should be replaced. Steps for replacing spark plugs: Open the engine hood, lift the plastic cover of the engine, and remove the high-voltage ignition wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for external debris like leaves or dust and ensure they are thoroughly cleaned. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage ignition wires according to the firing order, and then secure the cover.
18
4
Share

How Long Can You Drive with Water in the Engine Oil?

It is best not to continue driving, as failure to address the issue promptly may risk engine failure. When the engine oil contains excessive water, its performance will deteriorate. Under certain conditions, excessive water can reduce or even nullify the effectiveness of certain additives in the oil, thereby compromising the oil's viscosity. This prevents the oil from forming a proper lubricating film on the friction surfaces of moving parts, leading to mechanical damage or even failure. Below are the functions of engine oil: 1. Friction Reduction: A sufficiently thick oil film separates the surfaces of relatively sliding parts, thereby reducing wear. 2. Sealing: Engine oil can form a seal between the piston rings and pistons, minimizing gas leakage and preventing external contaminants from entering. 3. Rust Prevention: Lubricating oil adheres to part surfaces, protecting them from contact with water, air, acidic substances, and harmful gases. 4. Cushioning: When cylinder pressure rises sharply in the engine, suddenly increasing the load on pistons, piston rings, connecting rods, and crankshaft bearings, the lubricated transmission of this load through the bearings helps cushion the impact. 5. Cleaning: High-quality engine oil can carry away carbon deposits, sludge, and worn metal particles from engine components back to the oil pan through circulation, washing away contaminants generated on the working surfaces of parts via the flow of the lubricating oil.
15
5
Share

Which brand is leoparrd?

leoparrd refers to Leopaard. Here is relevant information about Leopaard Motors: 1. Leopaard Motors is the abbreviation of Hunan Leopaard Automobile Co., Ltd., a comprehensive automobile manufacturer engaged in R&D, production, sales, and service of complete vehicles and auto parts. 2. Leopaard Motors is one of China's largest light off-road vehicle manufacturers with over 60 years of military industry heritage and more than 30 years of automobile manufacturing experience. It inherits the quality advantages accumulated through decades of military production while incorporating advanced technological expertise gained through joint ventures, providing users with high-quality SUV and pickup truck products.
5
4
Share

Does the Great Wall Pao pickup have a diesel version?

Great Wall Pao does have a diesel version, and it also offers a gasoline version for owners to choose from. Great Wall Pao is a pickup truck under the Great Wall brand. This vehicle is equipped with two types of engines: a 2.0-liter turbocharged gasoline engine and a 2.0-liter turbocharged diesel engine. The dimensions of the Great Wall Pao are 5437 mm in length, 1958 mm in width, 1893 mm in height, with a wheelbase of 3230 mm. The 2.0-liter turbocharged diesel engine of the Great Wall Pao delivers 163 horsepower and a maximum torque of 400 Nm. The engine's maximum power output is achieved at 3600 rpm, and the maximum torque is available between 1500 to 2500 rpm. This engine features direct fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. It is paired with either a 6-speed manual transmission or an 8-speed automatic transmission. The 2.0-liter turbocharged gasoline engine produces 190 horsepower and a maximum torque of 360 Nm. The engine's maximum power output is achieved between 4000 to 5500 rpm, and the maximum torque is available between 1800 to 3600 rpm. This engine also features direct fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. It is paired with either an 8-speed automatic transmission or a 6-speed manual transmission.
7
2
Share

Where is the handbrake located on the Buick LaCrosse?

The handbrake of the Buick LaCrosse is located at the base of the gear shift lever. The Buick LaCrosse uses an electronic handbrake, and there is a button marked with a 'P' next to the base of the gear shift lever. Pressing this button has the same effect as pulling up the handbrake. Here is an introduction to the Buick LaCrosse: 1. The LaCrosse is a mid-to-high-end sedan officially launched by Buick in 2006. It has a body length of 5026mm, a width of 1866mm, a height of 1459mm, and a wheelbase of 2905mm. 2. It has a fuel consumption of 6.5 liters per 100 kilometers, a top speed of 235 km/h, and a 0-100 km/h acceleration time of 7.5 seconds. 3. The drive system is front-wheel drive, the engine is turbocharged, and the chassis suspension features a combination of front MacPherson and rear multi-link. 4. The exterior design adopts Buick's family design language, with smooth body lines and proportions that highlight a sporty feel. The interior storage space reaches 29 places, offering high practicality. 5. To enhance its competitiveness in the high-end car market, the latest LaCrosse model's luxury version is equipped with a 1.5T-SIDI direct-injection turbocharged engine, paired with a 9-speed HYDRA-MATIC intelligent transmission, ensuring robust power performance.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.