Skills for Warehouse Shunting and Reversing
3 Answers
Skills for warehouse shunting and reversing mainly include paying attention to summarizing experience, following the coach's instructions, and mastering clutch control. Below are the specific details about warehouse reversing techniques: 1. Pay attention to summarizing experience: The reversing direction is opposite to the rearview mirror. When backing into the warehouse from the starting point, the most important thing is to grasp the distance from the middle pole to avoid collisions between the rear of the truck or the rearview mirror and the middle pole. 2. Follow the coach's instructions: Besides summarizing, the quickest way to learn small reversing tricks is through coach guidance and careful practice. 3. Master proper clutch control: The key factor in reversing is the reasonable use of the clutch. Press the clutch, shift to 1st gear, slowly release the clutch to control the speed, while turning the steering wheel 1 circle to the right. Then straighten the steering wheel and observe the right rearview mirror. When the right rear corner pole is covered by the rear of the vehicle, immediately turn the steering wheel 2 circles to the left. When the left corner of the front hood reaches the middle pole, press the clutch, brake, shift to neutral, and stop.
Back when I was learning to drive, my instructor repeatedly emphasized that the key to parallel parking lies in finding reference points. You need to first position the car parallel to the parking space, leaving about 1.5 meters of distance. Then, look at the right side mirror - when the rear door handle aligns with the right corner of the parking space, immediately turn the steering wheel all the way to the right. The car speed must be as slow as a crawling turtle to allow time for adjustments. When the car body is almost straight, quickly straighten the wheels while keeping an eye on both side mirrors - gently steer toward whichever side has more space. Nowadays, backup cameras are indeed convenient, but experienced drivers know side mirrors remain the most reliable reference. If you don't get it right the first time, don't panic. It's much better to drive out and reposition than to force adjustments.
Having taught driving for ten years at a driving school, I always tell my students that the essence of parallel parking and garage reversing lies in 'three looks and one slow'. Look at the left and right rearview mirrors to observe the trajectory of the rear of the car, use the reversing camera to assist in judging the distance, and check the relative position between the car body and the garage corner. Steering wheel operations should be decisive but not too forceful. Turn the wheel when the garage corner appears at a specific position in the rearview mirror, and immediately observe the side margins through the mirrors once the rear of the car enters the garage. If the left side is too narrow, slightly adjust to the right, and vice versa. Controlling the speed is fundamental; gently resting your foot on the brake to reverse at a steady speed is the safest. Common mistakes beginners make are turning the wheel too late or going too fast. Remember, corrections should be made early and slight; large-angle adjustments will most likely result in crossing the line.
