Signs of Transmission Failure in the Buick Excelle GT?

1 Answers
DelOscar
07/30/25 9:20am
Common signs of transmission failure in the Buick Excelle GT: sluggish acceleration, inability to shift gears, jerking when reversing; sudden loss of power while driving, only reverse gear works; shaking during acceleration; gear slippage, jerking, inability to drive at high speeds; slipping when starting; jerking while driving, lack of power when accelerating, gear disengagement, and transmission oil leakage. Here are some related details: 1. Causes: Failure of the Excelle's transmission control module; wear and tear or fracture of the internal clutch hub wave plate in the Excelle's transmission. If you encounter transmission issues with the Excelle, it is essential to have it inspected and repaired promptly by a professional transmission repair service. 2. Can you still drive with a faulty transmission? If the transmission shows signs of failure, avoid continuing to drive the vehicle, and do not attempt to accelerate forcefully. Otherwise, the vehicle's transmission may suffer irreversible damage, compromising driving safety and ultimately leading to greater losses.
Was this review help?
18
2
Share
More Forum Discussions

Will the traffic police regulate the installation of navigation lights at the rear of a car?

Traffic police will regulate it. Installing navigation lights on a vehicle is considered an unauthorized modification of vehicle lighting, which is not permitted. Additionally, during vehicle inspections, it will not pass. According to the Road Traffic Safety Law, unauthorized modification of vehicle lighting is subject to penalties. Below is additional information: 1. The function of navigation lights: The primary purpose of navigation lights is to make the vehicle more noticeable during daytime driving. Their effect is not to help the driver see the road better but to inform others that a vehicle is approaching. Therefore, these lights are not for illumination but serve as signal lights. The goal of daytime running lights is to enhance traffic safety. 2. The role of daytime running lights: In recent years, many countries have established relevant standards for daytime running lights to ensure that the installed lights genuinely contribute to safety. When turned on while driving, they increase the visibility of moving vehicles, helping drivers take timely action in various situations. Daytime running lights are designed to signal the presence of a vehicle ahead during the day and are typically installed on both sides at the front. They help focus the attention of drivers, especially those who are fatigued.
18
4
Share

What are the common faults of the clutch?

Common clutch faults include: 1. Clutch slippage: When the car starts in low gear, the vehicle cannot start or has difficulty starting after releasing the clutch pedal; 2. Incomplete clutch disengagement: When the engine is idling, stepping on the clutch pedal results in gear collision sounds and difficulty engaging gears; 3. Starting shudder: When the car starts in low gear, gradually releasing the clutch pedal and slowly pressing the accelerator pedal according to operational procedures causes the clutch to engage unsteadily and produce vibrations, with severe cases even causing the entire vehicle to shake; 4. Clutch noise: Abnormal sounds occur when the clutch is disengaged or engaged.
13
2
Share

What are the 16 items in Subject 2 driving test?

Here is a detailed introduction to the 16 road test items in Subject 2: 1. Vehicle preparation: After hearing the voice prompt "Begin vehicle preparation for the test," walk around the vehicle once before getting in and fastening the seatbelt. 2. Night driving: Upon hearing "Now simulating night driving, approaching an intersection (switch to low beam), entering an unlit section (switch to high beam), road with good lighting (switch to low beam), approaching an uncontrolled intersection (sound horn), temporary parking by the roadside (activate hazard lights)." 3. Starting off: After hearing "Begin starting off (activate left turn signal for over 3 seconds, sound horn and start)," drive 10 meters after starting. 4. Straight-line driving: Upon hearing "Begin straight-line driving test," align the vehicle within the lane without crossing markings, and drive straight for 100 meters. 5. Lane change: After hearing "Begin lane change test," activate left turn signal (over 3 seconds) and change lanes, driving 100 meters. 6. Overtaking: Upon hearing "Begin overtaking test," activate left turn signal (over 3 seconds), move to overtaking lane, drive over 20 meters before returning, with total overtaking distance of 200 meters. 7. Meeting vehicles: After hearing "Begin meeting vehicles test," keep left side at least 30cm from double yellow lines, speed below 30km/h, for 70 meters. 8. Gear shifting: Upon hearing "Begin gear shifting test," sequentially shift from 2nd to 4th gear, then back to 2nd gear, fully release clutch after each shift while maintaining straight driving. Speed limits: 1st gear ≤20km/h, 2nd ≤27km/h, 3rd ≤37km/h, 4th ≤47km/h, 5th ≥30km/h. Total distance 250 meters. 9. Straight through intersection: After hearing "Begin straight through intersection test," maintain speed ≤30km/h and straight trajectory without crossing markings. 10. Left turn at intersection: Upon hearing "Begin left turn test," enter left-turn lane, activate left signal (over 3 seconds), turn at ≤30km/h without crossing markings. 11. Right turn at intersection: After hearing "Begin right turn test," enter right-turn lane, activate right signal (over 3 seconds), turn at ≤30km/h without crossing markings. 12. Pedestrian crossing: Upon hearing "Begin pedestrian crossing test," maintain ≤30km/h straight trajectory without crossing markings. 13. Bus stop: After hearing "Begin bus stop test," maintain ≤30km/h straight trajectory for 50 meters without crossing markings. 14. School zone: Upon hearing "Begin school zone test," maintain ≤30km/h straight trajectory for 50 meters without crossing markings. 15. U-turn: After hearing "Begin U-turn test," activate left signal (over 3 seconds) in overtaking lane and execute turn. 16. Pull over: Upon hearing "Begin pull over test," activate right signal (over 3 seconds), park within 30cm of curb (10-point penalty if >30cm), over 100 meters, then shift to neutral, engage handbrake, release footbrake, unfasten seatbelt, and open/close door. Continuous 1st gear driving ≤100 meters; marking straddling ≤60 meters.
20
0
Share

How to Replace the Battery in a Lexus Remote?

The method to replace the battery in a Lexus remote is: 1. There is a mechanical key inside the remote key, take out the mechanical key; 2. After taking out the mechanical key, there is a small groove in the middle of the plastic shell, insert the mechanical key into the groove and gently pry it open; 3. After opening, you can see the battery, simply replace it directly. Lexus is a famous luxury car brand under the Japanese Toyota Group, its logo uses the uppercase letter L from the car name Lexus, with an ellipse surrounding the L. The main models under Lexus include LM, UX300e, ES, RX, NX, UX, CT, etc.
8
3
Share

Where is the tire production date located?

Tire production date is located on the sidewall of the tire. As one of the important components of a vehicle, tires directly contact the road surface and work together with the vehicle suspension to mitigate impacts during driving. Tire usage tips: 1. Start smoothly at low speed to avoid dragging tires against the ground and reduce tread wear; 2. Avoid swaying and sharp turns to prevent lateral cutting damage between tires and rims; 3. Control speed when going downhill for long distances to minimize emergency braking and reduce tire wear; 4. Utilize inertia when going uphill, shifting gears and changing speeds appropriately; 5. Control speed when turning to avoid high-speed cornering.
7
2
Share

How to Check the Maximum Speed Rating of a Tire?

The method to check the maximum speed rating of a tire: The tire specification is described as tire width in mm, the percentage of tire thickness to tire width, R rim diameter (in inches), load index, and speed symbol. For example: 195/65R15 88H, where H represents the maximum speed rating. The speed rating of a tire is usually indicated by letters and numbers, showing the maximum speed at which the tire can carry a specified load under defined conditions. The speed rating of a tire is crucial for driving, as the vehicle speed must never exceed the tire's speed rating during operation. Tires are circular elastic rubber products mounted on various vehicles or machinery to roll on the ground, typically installed on metal rims. They support the vehicle body, cushion external impacts, ensure contact with the road surface, and maintain the vehicle's driving performance.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.