Should You Wear Thick-Soled or Thin-Soled Shoes for Subject Two?

1 Answers
DiHarmony
07/30/25 2:17am
Thin-soled shoes, preferably sports shoes. The following are precautions for taking Subject Two: 1. Mock Test: The purpose of a mock test is to familiarize the candidate with the exam environment, and the instructor can point out areas prone to point deductions. Therefore, a mock test is absolutely essential—being well-prepared is the best way to face the challenge. 2. Ensure Adequate Sleep: Make sure to get a good night's sleep the day before the exam to avoid involuntary nervousness or dizziness during the test. 3. Bring Your ID: Always carry your ID when attending the exam. Without it, you cannot take the test. Also, ensure your phone is turned off during the exam, as any activity from the phone could be considered cheating.
Was this review help?
8
0
Share
More Forum Discussions

What to Do When You Have No Cash at a Highway Toll Station?

Here are the solutions when you have no cash at a highway toll station: 1. Exchange cash via electronic transfer: If you don't have cash, electronic transfer is also acceptable. 2. Pledge items at the toll station: You can pledge important documents such as your driver's license or ID card. After pledging these documents, the toll station will let you pass, and you can retrieve them upon paying the cash later. 3. Call your insurance company: Insurance companies often provide free services within a certain range, such as roadside assistance, fuel delivery, or tire replacement. You can also exchange for cash when receiving these services from your insurer.
20
4
Share

Can license plates be transferred to a used car?

License plates can be transferred to a used car. After the original owner has used the license plates for more than 3 years, they can apply to retain the license plate number for six months when selling or transferring the vehicle. During this period, if the original owner purchases a used car, they can apply to use the previous license plate number. The following are the conditions that must be met to apply for the use of the original motor vehicle license plate number: 1. The application must be submitted within six months after the transfer or cancellation of registration; 2. The original motor vehicle must have been owned by the applicant for more than three years; 3. All traffic violations and accident-related issues involving the original motor vehicle must be resolved.
9
2
Share

What are the penalties and point deductions for driving without a driver's license?

No points will be deducted, but a fine may be imposed, and the traffic police may generally detain the vehicle, depending on the specific circumstances. Here is more relevant information: 1. Penalties for driving without a driver's license: If the driver provides the license: In the absence of other traffic violations, a fine ranging from 20 to 200 yuan will be imposed, 1 point will be deducted, and the vehicle will be returned. If the driver provides the license but has other traffic violations: Penalties will be imposed based on the circumstances along with the penalty for not carrying the license, and the vehicle will be returned. If the driver cannot provide the license: Penalties for driving without a license will apply, including a fine ranging from 200 to 2000 yuan and detention for up to 15 days. 2. If you don't have your driver's license, you can present the 12123 electronic driver's license: Presenting the 12123 electronic driver's license is also recognized by traffic police, but it is only applicable in certain regions where electronic licenses are enabled. If the region has not enabled electronic licenses, the original driver's license must be provided.
15
2
Share

What to Do About Severe Jerking During Buick LaCrosse Acceleration?

Here are solutions for severe jerking during Buick LaCrosse acceleration: 1. Adjust Shift RPM: The shifting method involves first increasing the RPM to 2000 before shifting. For some models, the torque output at this RPM may be relatively too high for the power required by the moving vehicle, potentially causing jerking. Therefore, it's necessary to moderately reduce the engine RPM during shifting, such as shifting at 1500 RPM. For large-displacement engines or those with good low-RPM torque, shifting can even be done at low RPMs of 1000-1200 without causing jerking, with minimal impact on acceleration. So, if you frequently experience jerking during shifts, try adjusting (lowering) the engine RPM during shifting to find a level that allows smooth gear engagement without affecting continued acceleration. 2. Adjust the Gear Engagement Sequence to a Progressive Style: Progressive shifting means following the sequence 1-2-3-4-5. In certain situations, using a skip-shift method can also avoid jerking, such as shifting directly from 2nd gear at 2000 RPM to 4th gear, or from 3rd gear to 5th gear. This is based on the principle that the front-end torque output of the powertrain roughly matches the rear-end torque demand, and it is often used more during acceleration on highways or flat roads.
12
3
Share

What does cylinder head contact mean?

Engine cylinder head contact occurs when the connecting rod is too long due to excessive clearance, causing it to hit the engine cylinder during operation, which is referred to as cylinder head contact. If an engine experiences cylinder head contact, it usually means the engine is scrapped. Additional details are as follows: Causes of cylinder head contact: When there is an issue with the connection between the piston and connecting rod, such as excessive clearance, the piston may exceed its normal operating trajectory, directly hitting the cylinder head. A dropped timing chain or belt, or a broken crankshaft pin, can also cause cylinder head contact, known as timing jump. This happens when the timing belt has been in use for too long or exceeds its service life, the tension adjustment device fails, or the timing belt and timing gear do not fit tightly, creating a gap. Valve issues can also lead to cylinder head contact, such as a stuck valve stem, broken intake or exhaust spring, or a valve falling into the cylinder. During repairs, using incorrect piston sizes, overly thick connecting rod bearings or shims, or a damaged cylinder block surface can also cause the piston top to be too high.
1
5
Share

Can Sinopec Gas Be Added to a Half Tank of PetroChina Gas?

Sinopec 95 can be mixed with PetroChina 95. Whether gasoline can be mixed depends on the gasoline grade, not the manufacturer, meaning gasoline of the same grade can be mixed. Although Sinopec 95 can be mixed with PetroChina 95, it is not recommended to mix them frequently. Although both Sinopec 95 and PetroChina 95 are produced according to the same specifications and meet national standards, it is best to stick to one brand. After all, the crude oil processing procedures and additives used by the two are always different. Long-term mixing may easily lead to engine shaking and carbon deposits in the combustion chamber. Below is more related information: Differences between Sinopec and PetroChina: 1. Raw materials: PetroChina mainly uses crude oil from oil fields in northern China, while Sinopec relies on imported crude oil as there are few oil fields in southern China. 2. Additives: Sinopec uses imported crude oil additives, and its oil quality is slightly better than PetroChina's. 3. Production technology: Sinopec uses world-leading crude oil refining technology, and its refined oil has a higher density than PetroChina's.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.