Should You Use 92 or 95 Octane Gasoline During the Vehicle Break-in Period?

[Parra]

Whether to use 92 or 95 octane gasoline during the vehicle break-in period should be determined based on the recommendations in the official car owner's manual. In addition to checking the appropriate gasoline grade in the owner's manual, you can also find it on the fuel tank cap, which is usually labeled. Typically, the gasoline grade can also be determined by the engine's compression ratio. Cars with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. If the compression ratio is higher, 98 octane gasoline is recommended. However, with the use of some new technologies, the gasoline grade cannot be solely determined by the compression ratio. High compression ratio engines can also be tuned to use lower octane gasoline because, apart from the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline octane number, the higher the octane value and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. Occasionally using the wrong gasoline grade only requires switching back to the correct grade after the tank is empty. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower octane gasoline, using higher octane gasoline will not cause damage, but the increase in octane value will change the fuel's ignition point, leading to delayed combustion in the engine. This means the engine's power output and thermal efficiency will decrease, resulting in poorer performance. For vehicles recommended to use higher octane gasoline, using lower octane gasoline can cause engine knocking. Because the octane value is too low, the gasoline's ignition point decreases and it may ignite prematurely during the compression stroke. If combustion occurs before the spark plug ignites, resistance will arise during the upward stroke. This resistance can make the engine run very unstably. If the knocking is mild, it may only increase noise without significant damage to the engine. However, if the knocking is severe, it indicates serious engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.