Should You Turn Off the Air Conditioner Before Turning Off the Engine?

1 Answers
Erica
07/29/25 4:30pm
You should turn off the air conditioner before turning off the engine. Forgetting to turn off the air conditioner after shutting down the engine can be harmful to the engine. This is because, during the next vehicle startup, the engine will have to bear the additional load of the air conditioner, which may cause damage due to the high stress. Below are some additional misconceptions about parking and turning off the engine: 1. Listening to music after turning off the engine: After the engine is turned off, devices such as the radio, CD player, navigation system, lights, and other electrical appliances can still be used. However, prolonged use can lead to excessive battery discharge, which may shorten the battery's lifespan. 2. Forgetting to turn off the lights before turning off the engine: Many new car owners often make the mistake of forgetting to turn off interior lights when parking and shutting down the engine. Experts warn that the battery may be drained overnight, making it difficult to start the car the next day.
Was this review help?
16
2
Share
More Forum Discussions

What Causes a Car Window to Go Down but Not Come Back Up?

Specific reasons for car window lifting issues are as follows: 1. System issue: Some problems with the control program can be resolved by refreshing the system. 2. Motor overheating protection: To protect the power supply circuit, the window lift motor has an overheating protection mechanism. If components overheat for any reason, the motor enters protection mode, temporarily stopping operation before resuming normal function after cooling. 3. Motor failure: If the motor itself malfunctions, the window lift will stop working completely. 4. Short circuit or loose connector: If wiring is partially broken, the window may work intermittently during driving. Complete wire breakage or connector detachment will permanently disable window operation. 5. Fuse blowout: The lift mechanism stops functioning entirely. 6. Switch damage: Requires switch replacement. 7. Rusty or loose ground wire: Easily prevents the lift mechanism from working. 8. Excessive resistance in window track: Dust accumulation in the track creates resistance during window movement, requiring regular track cleaning.
7
0
Share

What is the reason for the yellow EPC light on the Passat?

There are two possible reasons for the EPC light to illuminate. One is a dirty throttle body, which should be cleaned; the other is a non-functioning brake light, requiring inspection of the brake switch and wiring. Additionally, fuel quality issues can also cause the EPC warning light to come on. It is recommended to visit a 4S shop for inspection as soon as possible. Electronic Stability System: EPC stands for Engine Electronic Stability System, and many people also refer to it as the electronic throttle. This system consists of sensors, controllers, and other components. When a sensor fails or detects an abnormal condition, the control system will take appropriate measures based on pre-set programs. EPC Indicator Light: The EPC indicator light is commonly seen in Volkswagen vehicles. After turning the ignition key, the vehicle begins self-diagnosis, and the EPC light will illuminate for a few seconds before turning off. If the light remains on after the vehicle starts, it indicates a fault in the mechanical or electronic system.
7
5
Share

How to Turn on the Buick Envision Headlights?

To turn on the headlights of the Buick Envision, follow these steps: 1. Locate the light control lever on the left side of the steering wheel; 2. Push the lever forward to turn on the high beams; 3. Pull the lever backward to turn on the low beams; 4. When the low beams are on, push the lever forward to switch to high beams; 5. When the high beams are on, pull the lever backward and release to activate the high beam flash. The Buick Envision is a mid-size 5-door, 5-seat SUV with dimensions of 4694mm in length, 1839mm in width, and 1686mm in height, and a wheelbase of 2750mm. It is equipped with a 1.5T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 124 kW and a maximum torque of 250 Nm. The drivetrain is front-wheel drive, with a front suspension using MacPherson strut independent suspension and a rear suspension using multi-link independent suspension.
15
2
Share

What Causes a New Focus to Lose Power While Driving?

New Focus losing power while driving may be caused by the car running out of fuel, a dead battery, damaged electronic throttle, faulty accelerator pedal, or engine overheating. Running out of fuel: In this case, the vehicle should be refueled immediately. Dead battery: Electronic devices in the car will not function, affecting the normal operation of the engine and causing sudden loss of power while driving. In this situation, the car battery should be inspected and recharged promptly. Damaged electronic throttle: If the car is equipped with an electronic throttle, the electronic control components and circuits should be checked to prevent safety hazards. Faulty accelerator pedal: If the car has a traditional throttle, possible causes include a loose accelerator cable or damaged pedal spring. Specific repairs should be made after inspection. Engine overheating: Engine overheating can cause loss of power. If the engine operates for an extended period, leading to surface overheating, the cooling system may fail.
10
4
Share

Where is the computer board located in the Geely Borui?

The computer board of the Geely Borui is located in the lower left part of the driver's cabin. Remove a plastic panel and look up to find a black rectangular computer board. The Geely Borui is the first model under the Geely brand to incorporate Volvo's safety technology concepts, and it also represents a flagship product showcasing Geely's brand and product strength. Functions of the vehicle computer: The vehicle computer mainly consists of a microcomputer, integrated chips, a microprocessor memory, and input/output interface units. The core component of the vehicle computer is the CPU, which converts input signals into digital form, compares them with stored reference data, calculates the output value, and converts it into a certain voltage output to precisely control the vehicle's fuel injection volume. Computer board malfunction: First, inspect the vehicle's computer control circuit to rule out any circuit faults. Then, check the ECU system of the vehicle computer, as well as the condition of the circuit board and electronic components, to ensure they are functioning normally.
11
0
Share

How to Turn Off the Air Conditioning in the Tiguan?

Tiguan turns off the air conditioning by simply pressing the AC button on the air conditioning panel. Here is an introduction to the related buttons of the Tiguan's air conditioning: The other buttons on the air conditioning panel are: the left knob adjusts the air conditioning temperature, the middle one adjusts the air volume, and the right one adjusts the air vent position. The main functions of the car air conditioning are as follows: 1. Temperature adjustment: One of the most important indicators of the air conditioning system, the in-car temperature is generally controlled at about 24~28°C in summer and 14~18°C in winter. 2. Humidity adjustment: The air conditioning system commonly uses relative humidity, which refers to the ratio of water vapor in the air to saturated water vapor. The most comfortable relative humidity for humans is about 50%~60% in summer and 40%~50% in winter. 3. Airflow adjustment: This refers to controlling the speed and direction of the air. 4. Air purification: An air filter is installed at the air intake to handle dust, pollen, etc., in the air, and some also include activated carbon particles to absorb odors.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.