Should You Still Go to a 4S Store After the Car Warranty Expires?

Should the Engine Start-Stop Function Be Turned On?

Engine start-stop function should not be turned on. The original intention of the automatic engine start-stop design is for environmental protection and energy saving, and it can indeed achieve this goal in a theoretical environment. However, when combined with actual road conditions, such as prolonged traffic congestion, frequent stops and starts will inevitably increase the burden on the starter. The working principle of the start-stop function is: when the driver is seated in the cockpit and the traffic light ahead turns red, the driver presses the brake pedal, stops the vehicle, and shifts into neutral. At this point, the start-stop system automatically detects that the engine is idling without being in gear, the wheel speed sensor of the anti-lock system shows zero, and the electronic battery sensor indicates there is sufficient energy for the next start. Once these three conditions are met, the engine automatically stops running. When the traffic light turns green, the driver presses the clutch, and the 'start-stop device' can be activated immediately, quickly restarting the engine. The driver shifts gears, presses the accelerator, and the vehicle starts swiftly. Supported by efficient battery technology and corresponding engine management programs, the start-stop system can operate effectively even at lower temperatures, requiring only a brief warm-up process to activate.

2

Share

What does 0w40 mean?

In 0w40, the W stands for Winter. The smaller the number before it, the better the low-temperature fluidity of the oil, indicating a lower usable ambient temperature and better engine protection during cold starts. The number 40 indicates that the kinematic viscosity standard at 100°C is between 12.5m㎡/s and 16.3m㎡/s. Here is some related information: The viscosity of lubricating oil is often identified using SAE grades, where SAE is the abbreviation for the "Society of Automotive Engineers." The number after the "W" (after the hyphen) is an indicator of the oil's high-temperature resistance. The larger the number, the better the oil's protective performance at high temperatures. The selection of oil viscosity should meet both low-temperature startability and high-temperature lubricity. Choose viscosity grades based on region, season, and temperature, and try to use multi-grade oils. In extremely cold regions during winter, engine oils such as 0W, 5W, or 0W/20 or 5W/20 multi-grade oils should be used; in hot regions during summer, 40-grade oil or 20W/40 oils should be used.

11

5

Share

What are the differences between the 2018 Lamando and the 2019 Lamando?

Here are the differences between the 2018 Lamando and the 2019 Lamando: 1. In terms of exterior design, the 2019 Volkswagen Lamando has undergone subtle adjustments to the upper and lower grilles and headlights, resulting in a wider, flatter, and more level front end. The grille features a continuous dot-matrix chrome strip decoration, and LED headlights are standard across the entire lineup, with a simpler internal design and added sporty elements. 2. The side profile of the 2019 Volkswagen Lamando exhibits a distinct sense of layering, with a crease design for the waistline and blackened B-pillars. The body length is 4615 mm, width is 1826 mm, height is 1425 mm, and the wheelbase is 2656 mm, making it longer than the 2018 Lamando.

16

5

Share

Where is the child lock located on the Ford Escort?

The child lock of the Ford Escort is located on the side of the rear door. There is a small switch below the door lock. The rotary child safety lock requires inserting a key into the corresponding hole to rotate the knob switch for locking and unlocking operations. Below is more information about the child safety lock: 1. The child safety lock is used for the rear doors of the vehicle to prevent the danger of opening the door from inside while the vehicle is moving. When this device is activated, even if the electronic central door lock is opened, the device remains in the locked state. To open the rear door, you can only use the switch on the outside of the door when the central door lock is unlocked. 2. To ensure the safety of children during the ride, the child safety locks on both rear doors should be engaged. Once the child safety locks are engaged, no matter how much the child moves around in the back seat, they cannot open the door from inside. This ensures the child's safety and allows the driver to focus on driving.

13

4

Share

How to Check the Fuel Level in the Chevrolet Cavalier?

The Chevrolet Cavalier has a fuel tank capacity of 42L, and the remaining fuel level can be checked on the dashboard. Below is more information about the Chevrolet Cavalier: 1. The English name of the Cavalier, "Cavalier," means "knight," originating from the historically popular compact model Chevrolet Cavalier in General Motors' North American market. The front face of the Cavalier features Chevrolet's signature dual-layer front grille. The headlight assembly includes chrome trim and an innovative double-L-shaped LED daytime running light strip, which is standard across all models. 2. On March 27, 2018, the Cavalier 325T was officially launched. It is equipped with a new-generation Ecotec 1.0T dual-injection turbocharged engine and a 6-speed wet dual-clutch transmission with intelligent start-stop. This new powertrain combination in the Cavalier 325T delivers a maximum power of 88 kW, a maximum torque of 165 Nm, and a combined fuel consumption of only 5.0L per 100 km.

20

0

Share

What are the symptoms of a faulty car air conditioning relay?

When a car's air conditioning relay fails, the following symptoms may occur: 1. Faulty vehicle air conditioning relay: The vehicle's air conditioning system fails to start, and the compressor cannot operate. Even if the air conditioning occasionally starts, it will not provide cooling. 2. After power is applied, the refrigeration compressor does not work. When testing the adjustment components, if the relay does not engage, it indicates a relay malfunction. Use a multimeter to check whether the power supply circuit is normal. 3. Causes of relay damage: Poor contact of the relay's contacts (due to high-temperature burning or contamination). 4. If there is virtual soldering or desoldering of the relay's pins, the relay should be re-soldered or replaced immediately.

9

1

Share

Should You Still Go to a 4S Store After the Car Warranty Expires?

Should the Engine Start-Stop Function Be Turned On?

What does 0w40 mean?

What are the differences between the 2018 Lamando and the 2019 Lamando?

Where is the child lock located on the Ford Escort?

How to Check the Fuel Level in the Chevrolet Cavalier?

What are the symptoms of a faulty car air conditioning relay?

Where to Apply for Electric Vehicle License Plates in Beijing?

What is the engine model of the Buick Envision?

Which piece of glass is the most expensive in a sedan?

What stickers are required for new cars in 2020?