···
Log in / Register

Should You Slowly Release the Brake When Starting an Automatic Transmission Car?

1 Answers
VanFrank
07/29/25 8:56am
When starting an automatic transmission car, you should smoothly release the foot brake to allow the vehicle to start slowly using the creep phenomenon. Below is a related introduction about starting an automatic transmission car: 1. Correct method: (1) First move the gear selector to the intended driving position before pressing the accelerator pedal. (2) When pressing the accelerator, avoid stomping on it; instead, press it gently and gradually to accelerate slowly. 2. Precautions: When accelerating from a start in an automatic transmission car, avoid stomping on the accelerator and holding it down, as this will only increase the engine RPM, leading to engine roar and transmission wear, resulting in unnecessary fuel waste. Instead, gently press the accelerator to utilize low-speed downshifting for increased torque, allowing for gradual and uniform acceleration. Once the speed has increased, you can then accelerate further. This method will make driving an automatic transmission car feel smoother.
Was this review help?
7
5
Share
More Forum Discussions

Why does the scooter have unstable idle speed and always stall?

The reasons for unstable idle speed and frequent stalling of the scooter are as follows: 1. Idle speed switch: When the idle contact is closed and a low potential is input to the IDL terminal of the ECU, the ECU determines that the engine is in idle condition and starts the idle control program to control the engine operation. Due to improper adjustment of the idle contact gap, poor contact, damage, or circuit failure, the motorcycle engine ECU cannot correctly determine the idle condition, leading to idle control errors and various idle speed problems. 2. Idle speed control valve: The idle speed control valve is used to control the bypass air volume entering the intake manifold bypassing the throttle valve during idle conditions to regulate the idle speed. The engine maintains stable operation at the set target speed based on signals from the water temperature sensor and other auxiliary device status signals, using a feedback control process. The ISC control valve types include stepper motor type, rotary solenoid valve type, duty cycle control type, and vacuum solenoid valve type. When the ISC valve is clogged with carbon deposits, stuck, or when the control circuit experiences short circuits, open circuits, or grounding, the engine ECU cannot correctly control the opening of the ISC valve, resulting in poor idle speed.
4
0
Share

What are the contents of the motorcycle test site construction standards?

Motorcycle test site construction standards include: 1. Standard basis: The motorcycle test site and its facilities shall comply with industry standards such as "Specifications for the Setting of Motor Vehicle Driver Test Sites and Their Facilities" (GA1029-2012), "General Technical Requirements for Motor Vehicle Driver Test Systems" (GA1028-2012), and "General Technical Requirements for Motor Vehicle Driver Test Supervision Systems" (GA1027-2012). 2. Site conditions: The test site shall have functional areas such as parking areas, waiting areas, preparation areas, dispatch monitoring rooms, and test site service halls, equipped with supporting facilities such as catering and public health, emergency power supply, emergency exits or emergency passages, and necessary conditions such as security equipment, personnel, and equipment insurance.
8
3
Share

Is the Vehicle Transmission the Same as the Engine?

Car transmission is not the engine. Here is an introduction to the transmission: 1. Working Principle: The engine transmits power to the transmission, which then transfers the power to the vehicle's drive wheels. Essentially, the transmission only serves as a transfer mechanism. 2. Car Transmission: In automobiles, the transmission is commonly referred to as the "gearbox," while in industrial machinery, it is often called a "speed variator." It is a mechanical or hydraulic device used for mechanical power conversion. Below is additional information about the car engine: 1. Car Engine: The car engine is the machine that provides power to the vehicle, influencing its performance, fuel efficiency, and environmental impact. 2. Classification by Power Source: Depending on the power source, car engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid systems, among others.
20
0
Share

How to unlock the rear air conditioning 'rear lock' in the Magotan?

If you forget to bring your driver's license, you can show your ID card or inform the traffic police of your ID number. The traffic police will check the system to verify whether you have a driver's license. It is recommended that drivers try not to forget their licenses when going out. Depending on the situation of the driver providing the license, the following measures will be taken: 1. Situation one: If the driver provides the license and there are no other violations while driving, a warning or a fine of more than 20 yuan but less than 200 yuan will be given, and the vehicle will be returned in time. 2. Situation two: If the driver provides the license but there are violations while driving, penalties will be imposed based on the violations and the failure to carry the license, and the vehicle will be returned in time. 3. Situation three: If the driver fails to provide the license, penalties will be imposed for driving without a license.
20
5
Share

What does China V mean in vehicle emission standards?

Here is an introduction to the meaning of China V in vehicle emission standards: 1. China V vehicle emission standard means that the exhaust emissions comply with China's National V emission standard. The main difference at that level is the amount of harmful substances emitted in the fuel exhaust. 2. The China V emission standard is the fifth-stage national standard for motor vehicle pollutant emissions, also known as "China 5 standard". The emission control level of China 5 standard is equivalent to the fifth-stage emission standard currently implemented in Europe. The European Union has been implementing it since 2009, with stricter limits on motor vehicle emissions such as nitrogen oxides, hydrocarbons, carbon monoxide, and suspended particles. From China I to China V, each upgrade in standard reduces single-vehicle pollution by 30% to 50%.
1
1
Share

How to Convert Motorcycle Horsepower?

Motorcycle horsepower can be converted using the formula: kilowatts × 1.36 = horsepower, where 1 horsepower = 735 watts = 0.735 kilowatts, and 1 kilowatt = 1.36 horsepower. Related information about horsepower: 1. Horsepower data: Generally, when a motorcycle is launched, the manufacturer will provide the maximum horsepower data for the engine. Taking the DAYTONA-675 as an example, actual tests show that the bike's maximum horsepower is 111.1 HP (horsepower), with the output RPM noted at 12,600 rpm. This means that the peak 111.1 horsepower is only achieved when the engine exceeds 12,000 rpm. Below 7,000 rpm, the engine's output is even less than half of its maximum horsepower. 2. Power characteristics: High horsepower output is typically found in the high RPM range. This also contributes to what many riders perceive as one of the joys of riding: mastering power control. Because the engine's power is so elusive, understanding its characteristics becomes fundamental to handling a motorcycle.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.