Should You Run Over the Line Before the Slope Fixed-Point Parking in Subject Two?

2 Answers
Orlando
07/24/25 9:34pm
You must not run over the line before the slope fixed-point parking in Subject Two. Here is relevant information about Subject Two: 1. Related Concept: Also known as the small road test, it is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skills test subject. 2. Test Content: For small vehicles C1 and C2, the test items include five mandatory tests: reversing into a garage, parallel parking, slope fixed-point parking and starting, right-angle turns, and curve driving (commonly known as S-curves). Some regions also include a sixth item: high-speed toll collection. For large vehicles A1, A2, A3, B1, and B2, the test items include pole test, slope fixed-point parking and starting, parallel parking, passing a single-plank bridge, curve driving, right-angle turns, passing a width-restricted gate, passing continuous obstacles, driving on undulating roads, narrow road U-turns, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, rainy (foggy) conditions, slippery roads, and emergency handling.
Was this review help?
9
2
Share
LeCharles
08/10/25 2:41pm
In the hill start test item of the Subject 2 driving test, I always remind students not to cross the line. It's absolutely unacceptable to cross the line while moving before coming to a full stop - this will result in point deductions or even immediate failure. The test rules require you to keep the vehicle within the lines before coming to a complete stop; when parking, the front wheels or front bumper must accurately stop in the designated area without crossing or exceeding the line. I've seen many students make mistakes by crossing the line due to nervousness or poor distance control. My suggestion is to frequently use rearview mirrors to observe line positions during practice, find fixed reference points (such as aligning the door handle with the line edge), while maintaining proper speed to avoid stalling or rolling back. The key is to practice multiple times to develop muscle memory and ensure the entire process is smooth and error-free. Safety comes first, and developing good habits is crucial.
Was this review help?
11
1
Share
Expand All
More Forum Discussions

What are the differences in wheel sizes?

Here are the relevant introductions about the differences in wheel sizes: 1. Sensitivity: Large-sized wheels have higher handling sensitivity. Large-sized wheels are generally paired with low-profile tires, giving the entire wheel higher lateral stiffness. This means the wheel deforms less under high lateral forces such as high-speed cornering, thereby improving handling sensitivity. 2. Handling stability: Large-sized wheels offer stronger handling stability. Larger wheels exhibit less tilt during vehicle turns, enhancing control. 3. Comfort: Smaller wheels provide better comfort. For the same car model, the smaller the wheel, the higher the tire sidewall, which effectively suppresses vehicle vibrations and tire noise.
4
5
Share

Where is the headlight switch on a Tesla?

Tesla's headlight switch is located on the lighting control assembly to the left of the steering wheel. Rotating the knob turns the low beams on and off, while flipping the lever controls the high beams. Below is a detailed introduction about Tesla: 1. Overview: Tesla Motors generally refers to Tesla. Tesla is an American electric vehicle and clean energy company that manufactures and sells electric cars, solar panels, and energy storage systems. Its headquarters is located in Palo Alto. 2. Other Information: Tesla's first vehicle product was the Roadster, launched in 2008, which was a two-door sports car. The second product was the Model S, introduced in 2012, a four-door all-electric luxury sedan. The third vehicle product was the Model X, a luxury all-electric SUV.
4
5
Share

What Causes Abnormal Noise in Audi Engines?

Audi engine abnormal noise is caused by water pump noise, timing noise, or alternator noise. When abnormal engine noise is detected during driving, the vehicle should be stopped immediately for diagnosis and troubleshooting. If the issue cannot be determined independently, it is advisable to seek professional inspection and repair at a nearby auto repair shop based on the situation. Water Pump Noise: Water pump noise is mainly caused by the pump wheel bearing of the water pump. Prolonged operation, coupled with erosion from coolant and scale buildup, leads to severe wear of the water pump blade bearing. If this issue is not resolved promptly, it can result in complete water pump failure, where the pump operates but fails to circulate coolant, thereby affecting engine cooling. Timing Noise: Timing noise mostly occurs in the timing belt tensioner and timing chain limiter. The primary cause is deformation of the tensioner and wear on the limiter due to prolonged compression and friction. Mild cases may cause engine vibration, unstable idling, easy stalling, and difficulty in engine acceleration. In severe cases, timing misalignment can lead to valve deformation due to piston contact, necessitating an engine overhaul and replacement of the cylinder head. Alternator Noise: Alternator noise is typically caused by loose alternator bearings, lack of lubrication, or slack in the alternator belt. Loose bearings can easily damage the alternator, while a slack belt may cause slippage, insufficient drive, and affect the alternator's normal power supply.
12
2
Share

What is the difference between PU and TPU materials for car wraps?

The differences between PU and TPU materials for car wraps are as follows: 1. PU: The material used is polyurethane. Compared to PVC material, its advantage is increased toughness; the disadvantages are poor weather resistance, weak resistance to alkaline corrosion, gradual yellowing that cannot be repaired, and poor anti-fouling performance. 2. TPU: The material used is thermoplastic polyurethane. Its advantages include strong impact resistance, puncture resistance, and scratch resistance, stable thermal repair function, strong water repellency, excellent corrosion and stain resistance, high-temperature resistance, as well as low-temperature resistance, oil resistance, chemical resistance, etc. This material is recyclable and belongs to environmentally friendly materials. The disadvantage is complex processing and higher price.
15
3
Share

What causes the squeaking sound when pressing the clutch on a Wuling Hongguang?

Wuling Hongguang may produce abnormal noise when pressing the clutch due to worn clutch plates or broken clutch pressure plate springs, which requires replacement of the clutch plates or clutch pressure plate springs. The following is an introduction to the car clutch: 1. Introduction: The car clutch is located in the flywheel housing between the engine and the transmission, and the clutch assembly is fixed to the rear plane of the flywheel with screws. The output shaft of the clutch is the input shaft of the transmission. 2. Function: During driving, the driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine and the transmission, thereby cutting off or transmitting the power input from the engine to the transmission.
12
5
Share

Can New Energy Vehicles Run Air Conditioning While Charging?

New energy vehicles can run air conditioning while charging, but it is not recommended. Using the air conditioning during the charging process increases the internal charge load on the power battery pack of new energy electric vehicles. Here are some additional details: 1. Correctly master the charging time: The charging time for the battery is about ten hours, and overcharging should be avoided. Plan charging stops in advance when preparing for a trip to avoid running out of power while driving. 2. Protect the charger: Try to avoid subjecting the charger to bumps and vibrations. To reduce costs, most chargers today are not designed to withstand high levels of vibration. Many chargers experience internal potentiometer drift after vibration, leading to parameter drift and abnormal charging. If you must move the charger, try to pack it well with plastic foam.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.